Option (A) is correct.
Explanation: The two wires are in series, so each carries the full tension F. Each has the same stress F/A but a different strain, so the extensions add:
ΔL=AYsFL+AYaFL=AFL(Ys1+Ya1)
A single wire of length 2L and modulus Y would stretch by AYF(2L). Equating the two:
Y2=Ys1+Ya1⇒Y=Ys+Ya2YsYa=2702×200×70 GPa=103.7 GPa
The effective modulus is closer to the smaller value, because the more stretchable aluminium half contributes most of the extension.
(B) is wrong: 135 GPa is the simple average of the two moduli; in series it is the strains that add, so the reciprocals of the moduli must be averaged, not the moduli.
(C) is wrong: 51.9 GPa=Ys+YaYsYa leaves out the factor 2 that comes from the total length being 2L.
(D) is wrong: 270 GPa adds the moduli, which would make the joined wire stiffer than steel alone; adding a more stretchable piece can only make it stretch more.