(a) Number of moles:
μ=Mm=27×10−32.0=74.1 mol
The molar specific heat capacity is the heat per mole per kelvin, C=sM:
C=900×27×10−3=24.3 J mol−1 K−1
(b)
Q=msΔT=2.0×900×50=9.0×104 J
(c) The volume of the block is V=m/ρ=2.0/2700=7.41×10−4 m3, so
ΔV=αVVΔT=7.0×10−5×7.41×10−4×50=2.59×10−6 m3
W=PΔV=1.013×105×2.59×10−6=0.26 J
By the first law,
ΔU=Q−W=9.0×104−0.26≈9.0×104 J
Practically all of the heat (all but about 3 parts in a million) goes into internal energy.
(d) For an ideal gas at constant pressure, W=PΔV=μRΔT:
Wgas=74.1×8.31×50=3.08×104 J
This is more than 105 times the 0.26 J done by the aluminium, and about a third of the heat that the block needed.
A solid expands so little that the work it does against the atmosphere is negligible. Heating it at constant pressure therefore needs practically the same heat as heating it at constant volume, so for a solid Cp≈Cv and a single value is quoted (as in Table 11.1). For a gas the expansion work is large, so Cp exceeds Cv by R.