(a) The initial volume is V1=μRT/P=8.31×400/(2.0×105)=1.66×10−2 m3=16.6 L.
Isothermal: PV is constant, so
P2=3P1=32.0×105=6.67×104 Pa
Wiso=μRTlnV1V2=1.0×8.31×400×ln3=3652 J≈3.65×103 J
(b) Adiabatic: TVγ−1 is constant (this follows from PVγ=constant and PV=μRT), so
T2=T1(V2V1)γ−1=400×3−2/3=400×0.481=192 K
P2=P1(V2V1)γ=2.0×105×3−5/3=3.20×104 Pa
Wadi=γ−1μR(T1−T2)=2/31.0×8.31×(400−192.3)=2589 J≈2.59×103 J
(c) Both curves start at (16.6 L, 2.0×105 Pa) and end at 49.9 L. The adiabat falls more steeply and ends at the lower pressure:

(d) The work done by the gas is the area under its curve on the P–V diagram. In the isothermal expansion heat flows in from the bath to keep the temperature at 400 K, so the pressure falls only as 1/V. In the adiabatic expansion no heat enters; the work is done entirely at the expense of the internal energy, so the gas cools (to 192 K) and its pressure falls faster (as 1/V5/3). At every volume beyond the start the adiabatic pressure is lower, so the area under the adiabat, and hence the work, is smaller: 2589 J compared with 3652 J.