Competency-Based Questions (CBQ) · Question 72 of 80
Reading temperature gradients.
Question 723 marksHard
Reading temperature gradients. Two rods A and B of equal cross-section are joined end to end, and their sides are lagged. Rod A is 20cm long and rod B is 16cm long. The free end of A is held at 100∘C and the free end of B is held at a lower fixed temperature. In the steady state, the temperature falls steadily along each rod: by 4.0∘C per cm along A and by 0.50∘C per cm along B.
(a) Find the ratio KB/KA of the thermal conductivities. Which pair of metals in Table 10.6 could A and B be?
(b) Find the temperatures of the junction and of the cold end of B.
(c) Sketch a graph of temperature against distance along the two rods.
(a) With the sides lagged and conditions steady, the same heat current flows through both rods: H=KAdxdT. The areas are equal, so
KA×4.0=KB×0.50⇒KAKB=8
The rod with the gentler gradient is the better conductor. From Table 10.6, A could be steel (50.2) with B either silver (406/50.2=8.1) or copper (385/50.2=7.7); both ratios are close to 8.
(b) Along A (length 20cm) the temperature falls by 4.0×20=80∘C, so the junction is at 100−80=20∘C. Along B (length 16cm) it falls by 0.50×16=8∘C, so the cold end is at 20−8=12∘C.
(c) The graph is two straight lines meeting at the junction: a steep line from 100∘C to 20∘C over A, then a gentle line from 20∘C to 12∘C over B. Each line is straight because H, K and A are constant within a rod, so dT/dx is constant.