Confirming your payment

Skip to content

Competency-Based Questions (CBQ) · Question 64 of 80

Measuring a poor conductor.

Question 645 marksHard

Measuring a poor conductor. To find the thermal conductivity of a board material, a student clamps a disc of it, 2.0 mm2.0\ \text{mm} thick and of radius 5.0 cm5.0\ \text{cm}, between a steam chamber at 100 ∘C100\ ^\circ\text{C} above and a thick copper disc of the same radius below. The copper disc has mass 0.80 kg0.80\ \text{kg} (s=386.4 J kg−1 K−1s = 386.4\ \text{J kg}^{-1}\ \text{K}^{-1}) and loses heat to the room from its own surface. After a long time its temperature stays steady at 73.8 ∘C73.8\ ^\circ\text{C}. In a separate run, the copper disc is heated a little above 73.8 ∘C73.8\ ^\circ\text{C} on its own, with the specimen laid back on top of it, and allowed to cool: as it passes 73.8 ∘C73.8\ ^\circ\text{C} it is cooling at 0.040 K s−10.040\ \text{K s}^{-1}.

Class 11 Physics Thermal Properties Of Matter Question 64

(a) Explain why, in the steady state, the rate at which heat flows through the specimen equals ms dTdtms\,\dfrac{dT}{dt} measured in the cooling run at 73.8 ∘C73.8\ ^\circ\text{C}.

(b) Find the rate of heat flow through the specimen.

(c) Find the thermal conductivity of the board material, and identify a material of Table 10.6 with a similar value.

(d) Explain why the specimen is made thin and wide. If the student forgot to put the specimen back on the copper disc during the cooling run, would the value of KK come out too large or too small?