(a) Series. Resistances in series add:
Rs=44+44=88 Ω
Ps=RsV2=882202=8848400=550 W
(b) Parallel. For two equal resistors in parallel:
Rp=244=22 Ω
Pp=RpV2=2248400=2200 W
(c) Parallel is "high" and series is "low", and they differ by a factor of
5502200=4
Why parallel gives more heat. It is natural to think that adding a second path must share the current out and give less heating, but the opposite happens, and the reason is that the mains voltage is fixed.
- In series, the two coils share the 220 V between them — 110 V across each — and the total resistance is doubled to 88 Ω. From I=V/R the current is only 220/88=2.5 A.
- In parallel, each coil has the whole 220 V across it, and each independently draws 220/44=5 A. The mains therefore supplies 5+5=10 A — four times the series current.
Since P=VI with V fixed, four times the current is four times the power.
Put the other way round: in parallel the total resistance is lower, and a lower resistance across a fixed voltage means a larger current. Adding a parallel branch never reduces the current drawn from a supply — it always increases it. This is exactly why switching on one more appliance in a house makes the total current rise, and why a circuit can be overloaded by adding one appliance too many.
