(a) From P=V2/R, the resistance is R=V2/P:
Rheater=11002202=110048400=44Ω
Rbulb=1002202=10048400=484Ω
(b) In series the resistances add:
Rs=44+484=528Ω
I=RsV=528220≈0.42A
(c) The same current flows through both, so the power in each is P=I2R:
Pheater=(0.417)2×44≈7.6W
Pbulb=(0.417)2×484≈84W
The heater gets only about 7.6W instead of 1100W, so it hardly warms up. With the same current in both, the power I2R is larger in the larger resistance, so the bulb (484Ω) takes most of the power, about 84W, close to its rated 100W. The potential difference divides in proportion to the resistances: about 202V across the bulb and only about 18V across the heater.
(d) They should be connected in parallel across the mains. In parallel, each appliance gets the full 220V, so each draws the current it was designed for and works at its rated power. Each can also be switched on and off separately, and if one fails the other keeps working.
The series arrangement is not used in domestic wiring because appliances with different resistances need different currents, and in series they are forced to share one current and one supply voltage.