(a) In parallel.
The evidence is in the photograph: one bulb has failed and the others are unaffected. In a parallel arrangement each bulb sits on its own branch across the supply, so a break in one branch leaves every other branch complete and the current in them unchanged.
(b) In series.
A series circuit gives the current only one path. A broken filament anywhere in that path is a gap in the only route available, so the current stops everywhere in the string at once — not just at the bulb that failed. Every bulb goes out together, and finding the culprit means testing them one by one.
(c) In series the supply voltage is shared, and 20 identical bulbs share it equally:
Veach=20220=11 V
(Which is why such a string uses tiny low-voltage bulbs, not mains bulbs.)
Why houses are wired in parallel (the question asks for two; any two of these are enough):
1. One failure does not black out everything. Each lamp has its own path, so a lamp that fails leaves the rest burning — exactly as in the photograph. A house wired in series would go completely dark when any single bulb blew.
2. Every appliance receives the full mains voltage. In parallel each lamp is connected straight across 220 V and works at its rated brightness. In series each would get only a fraction, and adding one more lamp would dim all the others.
3. Each appliance can be switched independently. A switch in one parallel branch controls only that branch; in series one switch would control everything at once.
The trade-off worth noticing: series wiring is cheaper — less cable and cheap low-voltage bulbs — which is precisely why a decorative string still uses it, and precisely why it fails the way it does.