Opening your dashboard
Class 12 Physics Chapter 14 Electromagnetic Waves: Previous Year Questions
37 questions on Chapter 14, each solved step by step. Class 12 Physics, CBSE 2026-27.
37 questions with solutions
1–5 marks · Hard difficulty
- 11 mark
Question 1
and represent the electric and the magnetic field of an electromagnetic wave respectively. The direction of propagation of the wave is along
Solve with AIAnswer
(A)
(B)
- Correct
(C)
(D)
Option (C) is correct.
Explanation: The wave travels perpendicular to both and , in the direction given by the right-hand rule for . Curl the fingers of the right hand from to , and the thumb points along the direction of travel.

points exactly the opposite way, so (D) is wrong.
- 21 mark
Question 2
An electromagnetic wave is produced by a charge
Solve with AIAnswer
(A) moving with a constant velocity
(B) moving with a constant speed parallel to a magnetic field
- Correct
(C) moving with an acceleration
(D) at rest
Option (C) is correct.
Explanation:
- A charge at rest produces only a static electric field.
- A charge moving with constant velocity (a steady current) produces a magnetic field that does not change with time.
- In (B), a charge moving parallel to a magnetic field feels no magnetic force, so it keeps a constant velocity and does not radiate.
Only an accelerated charge produces fields that vary in time and regenerate each other as a wave.

- 31 mark
Question 3
The ratio of the magnitudes of the electric field and magnetic field of a plane electromagnetic wave is
Solve with AIAnswer
(A) 1
(B)
- Correct
(C)
(D)
Option (C) is correct.
Concept used — the field amplitudes of a plane electromagnetic wave
For a plane electromagnetic wave travelling in vacuum, the electric and magnetic fields oscillate in phase, for example and . Maxwell's equations (Faraday's law applied to the wave) link their amplitudes:
Step 1 — Use the fact that the fields are in phase. Both fields contain the same factor , so at any point and instant
Step 2 — Substitute the amplitude relation.
Step 3 — Check the units. is in N C⁻¹ and in tesla, where 1 T = 1 N s C⁻¹ m⁻¹. So has units , a speed, as is.
Answer: , option (C).

E and B rise and fall together, so their ratio is the same everywhere along the wave.
Why the others fail: (A) would need and to be numerically equal, but they are different physical quantities and the ratio has units of speed, so it cannot be a pure number. (B) is the ratio the other way round, . (D) has units s² m⁻², not those of a speed.
- 41 mark
Question 4
Choose the correct option related to wavelengths () of different parts of electromagnetic spectrum.
Solve with AIAnswer
(A)
(B)
- Correct
(C)
(D)
Option (C) is correct.
Explanation: From Table 8.1 of the NCERT textbook:
- radio waves: more than 0.1 m
- microwaves: 0.1 m to 1 mm
- visible light: 700 nm to 400 nm
- X-rays: 1 nm to nm

So the wavelength decreases steadily from radio waves to X-rays.
- 51 mark
Question 5
Which one of the following electromagnetic radiation has the least wavelength?
Solve with AIAnswer
- Correct
(A) Gamma rays
(B) Microwaves
(C) Visible light
(D) X-rays
Option (A) is correct.
Explanation: Gamma rays have wavelengths below about nm, which is shorter than the other three:
- X-rays: nm to 1 nm
- visible light: 400 nm to 700 nm
- microwaves: 1 mm to 0.1 m

The shortest wavelength also means the highest frequency and the most energetic photons.
- 61 mark
Question 6
The diagram below shows the electric field (E) and magnetic field (B) components of an electromagnetic wave at a certain time and location.

The direction of the propagation of the electromagnetic wave is
Solve with AIAnswer
- Correct
(A) perpendicular to and and out of plane of the paper
(B) perpendicular to and and into the plane of the paper
(C) parallel and in the same direction as
(D) parallel and in the same direction as
Option (A) is correct.
Explanation: Take to the right, up the page and out of the page. Here is along and is along :
The wave comes out of the page, towards the reader.

- 71 mark
Question 7
Radio and television reception involves a process wherein broadcasted waves reach receiving antennae and interact with the electric charges in the antenna. Depending upon the shape, the antenna either interacts with the oscillating electric field vectors or magnetic field vectors of the em wave. In either case, the electrons experience force (electric or magnetic), and are set into alternating motion, thereby inducing the time varying current that is transmitted through the antennae as the signals.
Study the figures carefully. In each of the following figures, either E or B waves are omitted in the receiving wave for simplicity. Study the following orientations of the antennae (wire and the loop).

Select the orientation that results in the best reception of the incoming signals by the antennae.
Solve with AIAnswer
(A) I
- Correct
(B) II
(C) III
(D) IV
Option (B) is correct.
Explanation:
- A straight wire responds to . The electric field pushes electrons along the wire only if the wire is parallel to .
- A loop responds to . An emf is induced only if the changing passes through the loop, that is, if is along the loop's normal (the loop's plane is perpendicular to ).
Checking each figure:
- I: is vertical, but it lies in the plane of the loop, so almost no flux links the loop.
- II: is vertical and the wire is vertical. This is best.
- III: lies in the plane of the loop again, so there is no flux.
- IV: is horizontal, but the wire is vertical, so the field pushes electrons across the wire rather than along it.
- 81 mark
Question 8
The diagram below shows a single EM wave of wavelength . For different values of given as and , which of the following statements are correct?

I. Energy density is maximum at and
II. Magnitude of instantaneous intensity is minimum at
III. Energy density and the magnitude of instantaneous intensity have minimum values at positions where E and B are both zero.
Solve with AIAnswer
(A) Only I is true
(B) Only II is true
(C) Only III is true
- Correct
(D) All statements I, II & III are true
Option (D) is correct.
Explanation: In the figure, and are largest at and have the form (at this instant), with everywhere.
The energy density of the wave is , and the energy carried per second through unit area (the intensity) is proportional to .
- is largest at , where . I is true.
- is zero at , where both fields vanish, so the intensity is least there. II is true.
- These are exactly the points where and are both zero. III is true.

- 91 mark
Question 9
Which of the following statement is NOT true about the properties of electromagnetic waves?
Solve with AIAnswer
(A) These waves do not require any material medium for their propagation
(B) Both electric and magnetic field vectors attain the maxima and minima at the same time
(C) The energy in electromagnetic wave is divided equally between electric and magnetic fields
- Correct
(D) Both electric and magnetic field vectors are parallel to each other.
Option (D) is correct.
Explanation:
- (A) is true: light crosses the vacuum of space.
- (B) is true: and oscillate in phase.
- (C) is true: since , the energy density of the magnetic field equals of the electric field.
- (D) is false: and are perpendicular to each other, and to the direction of travel.

- 101 mark
Question 10
If and represent electric and magnetic field vectors of the electromagnetic wave, the direction of propagation of electromagnetic wave is along
Solve with AIAnswer
(A)
(B)
(C)
- Correct
(D)
Option (D) is correct.
Explanation: The wave travels perpendicular to both fields, in the direction of .
- (A) is a scalar ( for the wave), so it has no direction.
- (C) points backwards.

For the NCERT wave, is along and is along , so : the wave travels along .
- 111 mark
Question 11
In the four regions I, II, III and IV, the electric fields are described as:
Region I:
Region II:
Region III:
Region IV:
The displacement current will exist in the region
Solve with AIAnswer
- Correct
(A) I
(B) IV
(C) II
(D) III
Option (A) is correct.
Explanation: The displacement current density is
so a displacement current exists only where the electric field changes with time. In region I the field depends on , so . In regions II, III and IV the field may vary from place to place (, ), but it does not change with time, so and there is no displacement current.
- 121 mark
Question 12
A capacitor consists of two parallel plates, with an area of cross-section of 0.001 m², separated by a distance of 0.0001 m. If the voltage across the plates varies at the rate of V/s, then the value of displacement current through the capacitor is
Solve with AIAnswer
- Correct
(A) A
(B) A
(C) A
(D) A
Option (A) is correct.
Concept used — displacement current (Ampere–Maxwell law)
A changing electric flux acts as a current, called the displacement current:
Between the plates of a parallel plate capacitor the field is uniform, , so the flux through the plate area is . Since and are fixed,
(The factor is the capacitance , so this is the same as , the charging current.)
Given: plate area ; plate separation ; rate of change of voltage ; .
To find: the displacement current .
Step 1 — Work out .
Step 2 — Multiply by the rate of change of voltage.
Answer: the displacement current is A (8.85 mA), option (A).
Why the others fail: (B) A is what you get by leaving out the factor , that is, . (C) and (D) differ from (A) only in the first digit; they would need or in SI units, and neither is the value of .
- 131 mark
Question 13
Welders wear special glass goggles or face masks with glass windows to protect their eyes from radiations produced by welding arcs. These radiations are
Solve with AIAnswer
(A) X-rays
- Correct
(B) Ultraviolet rays
(C) Infrared waves
(D) Gamma rays
Option (B) is correct.
Explanation: Welding arcs are extremely hot and give out large amounts of ultraviolet (UV) radiation. UV rays can damage the eyes, but they are absorbed by ordinary glass, so welders wear goggles or masks with glass windows. Welding arcs do not produce X-rays (A) or gamma rays (D) in significant amounts, and glass windows would not stop gamma rays in any case. Infrared (C) is felt as heat; glass is not the protection meant here.
- 141 mark
Question 14
Electromagnetic waves of wavelength of the order of a few metres were first produced and detected in the laboratory by
Solve with AIAnswer
(A) J.C. Maxwell
(B) J.C. Bose
- Correct
(C) H.R. Hertz
(D) G. Marconi
Option (C) is correct.
Explanation: Maxwell predicted electromagnetic waves theoretically (A). In 1887, Hertz first produced and detected them in the laboratory, using an oscillating spark gap; the waves had wavelengths of a few metres, and he showed that they could be reflected, refracted and made to interfere. J.C. Bose (B) later produced much shorter waves (25 mm to 5 mm), and Marconi (D) used electromagnetic waves to send signals over long distances.
- 151 mark
Question 15
Assertion (A): Out of infrared and radio waves, the radio waves show more diffraction effect.
Reason (R): Radio waves have greater frequency than infrared waves.
Solve with AIAnswer
(A) Both Assertion (A) and Reason (R) are true, and Reason (R) is the correct explanation of Assertion (A).
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of Assertion (A).
- Correct
(C) Assertion (A) is true, but Reason (R) is false.
(D) Assertion (A) is false, and Reason (R) is also false.
Option (C) is correct.
Explanation: Diffraction is more noticeable when the wavelength is large compared with the size of the obstacle or opening. Radio waves have much longer wavelengths than infrared waves, so they show more diffraction (the Assertion is true). The Reason is false: radio waves have a lower frequency than infrared waves, which is exactly why their wavelength () is longer.
- 162 marks
Question 16
How are electromagnetic waves produced? Write their two characteristics.
Solve with AIWritten solution
Production: electromagnetic waves are produced by accelerated charges. A charge oscillating with frequency produces an oscillating electric field, which produces an oscillating magnetic field. That in turn produces an oscillating electric field, and so on. The fields regenerate each other and travel outward as a wave of the same frequency .

Two characteristics (any two):
- They are transverse: and are perpendicular to each other and to the direction of travel.
- They need no material medium, and all of them travel in vacuum at the same speed, m s⁻¹.
- , and the two fields oscillate in phase.
- 172 marks
Question 17
(a) Given the direction of electric and magnetic fields, how is the direction of an EM wave determined?
(b) Suggest a pair of varying electric ( or or ) and magnetic field ( or or ) vectors that would generate a plane electromagnetic wave travelling along direction.
Solve with AIWritten solution
(a) The wave travels along , which is perpendicular to both fields and fixed by the right-hand rule.
(b) Both fields must be perpendicular to , so they are along or . The pair and works:
This is along , as required.

( with , or with , would also work, since .)
- 182 marks
Question 18
A capacitor made of two parallel plates, each of area '' and separation '' is charged by an external dc source. Show that during charging, the displacement current inside the capacitor is same as the current charging the capacitor.
Solve with AIWritten solution
Let the charge on the plates be at time . The charging (conduction) current in the wires is
Between the plates the field is , so the electric flux through the gap is
The displacement current is then

The current is continuous: conduction current in the wires, and an equal displacement current across the gap.
- 192 marks
Question 19
How does Ampere-Maxwell law explain the flow of current through a capacitor when it is being charged by a battery? Write the expression for the displacement current in terms of the rate of change of electric flux.
Solve with AIWritten solution
While the capacitor charges, a conduction current flows in the wires, but no charge crosses the gap. The charge on the plates keeps growing, so the electric field between them grows too:
The changing flux acts as a current across the gap, called the displacement current:
This exactly equals the current in the wires. The Ampere–Maxwell law counts both kinds of current:
So the "current through the capacitor" is carried across the gap by the displacement current, and the circuit behaves as if the current were continuous.

- 202 marks
Question 20
How is electromagnetic wave produced? Draw a sketch of a plane EM wave propagating along -axis depicting the directions of the oscillating electric and magnetic fields.
Solve with AIWritten solution
Production: an accelerated (for example, oscillating) charge produces a time-varying electric field. This produces a time-varying magnetic field, which in turn produces a time-varying electric field. The two fields keep regenerating each other and travel outward as an electromagnetic wave, with the frequency of the source.
Sketch: for travel along , take along and along . They are perpendicular to each other and to , and they oscillate in phase. Check: .

- 212 marks
Question 21
For a plane electromagnetic wave, propagating along the -axis, write the two (possible) pairs of expressions for its oscillating electric and magnetic fields. How are the peak values of these (oscillating) fields related to each other?
Solve with AIWritten solution
Pair 1: along , along :
Pair 2: along , along :

Peak values: , where is the speed of light in vacuum.
- 223 marks
Question 22
(a) A radio wave and an infrasonic wave have the same wavelength when travelling through air. Are their frequencies the same or different? Give a reason for your answer.
(b) An electromagnetic wave traveling east has a magnetic field that oscillates vertically and has a frequency of 60 kHz and an rms strength of T. Determine the frequency and the rms strength of the electric field. What is the direction of the electric field?
Solve with AIWritten solution
(a) Different. For any wave . The radio wave is electromagnetic and travels at about m s⁻¹. The infrasonic wave is a sound wave and travels at only about 340 m s⁻¹. With the same , the radio wave's frequency is about times larger.
(b) The electric field oscillates at the same frequency, 60 kHz, and
is perpendicular to (vertical) and to the direction of travel (east), so it is horizontal, along the north–south line. When points up, points north, since north × up = east.

- 233 marks
Question 23
Consider a radiation whose magnetic field component is given by Wb m⁻².
(a) In which direction does the radiation travel?
(b) Find its wavelength and frequency, and name the part of the electromagnetic spectrum it belongs to.
(c) Find the amplitude and direction of its electric field.
Solve with AIWritten solution
(a) The phase is , so the radiation travels along .
(b) Compare with :
(Check: m s⁻¹ .) A wavelength of m (0.05 nm) lies in the X-ray region.
(c)
is perpendicular to (along ) and to , so it is along . It must make point along : . So when is along , is along :

- 243 marks
Question 24
(a) Arrange the following electromagnetic waves in the descending order of their wavelengths:
-
Microwaves
-
Infra-red rays
-
Ultra-violet radiation
-
Gamma rays
(b) Write one use each of any two of them.
Solve with AIWritten solution
(a) Microwaves (1 mm – 0.1 m) > Infra-red (700 nm – 1 mm) > Ultraviolet (1 nm – 400 nm) > Gamma rays (below nm).

(b) Any two:
- Microwaves: radar for aircraft navigation; microwave ovens.
- Infra-red: remote controls of TVs; physiotherapy lamps.
- Ultraviolet: killing germs in water purifiers; LASIK eye surgery.
- Gamma rays: destroying cancer cells.
-
- 252 marks
Question 25
(a) Which out of wavelength, frequency and speed of an electromagnetic wave does not change on passing from one medium to another?
(b) A thin ozone layer in the upper atmosphere is crucial for humans' survival on Earth, why?
Solve with AIWritten solution
(a) The frequency does not change. It is set by the source, which keeps oscillating at the same rate. The speed changes ( depends on the medium), and so the wavelength changes too.

(b) The ozone layer absorbs most of the Sun's ultraviolet radiation. Large doses of UV are harmful to humans: they damage skin, eyes and living cells. Without the ozone layer, much more UV would reach the ground.
- 262 marks
Question 26
Identify the electromagnetic wave whose wavelengths range is from about
(a) m to about m.
(b) m to about m.
Write one use of each.
Solve with AIWritten solution
(a) X-rays (NCERT: about m down to m). Use: diagnosing fractures in medicine, or treating certain cancers.
(b) Microwaves (1 mm to 0.1 m). Use: radar in aircraft navigation, or microwave ovens.

- 272 marks
Question 27
Identify the electromagnetic radiation and write its wavelength range which is used to kill germs in water purifier. Name the two sources of these radiations.
Solve with AIWritten solution
Ultraviolet (UV) rays.
- Wavelength range: about 400 nm down to 1 nm ( m to m).
- Sources (any two): the Sun, special UV lamps (such as mercury-vapour lamps), and very hot bodies. Welding arcs also produce UV.

- 282 marks
Question 28
(a) How are infrared waves produced? Why are these waves referred to as heat waves? Give any two uses of infrared waves.
OR
(b) How are X-rays produced? Give any two uses of these.
Solve with AIWritten solution
(a) Infrared waves
- Production: by hot bodies and by the vibration of atoms and molecules. Every object above absolute zero emits some infrared.
- Heat waves: when infrared falls on matter, it is readily absorbed, especially by water molecules. This increases the vibration of the molecules, which raises the internal energy and hence the temperature.
- Uses (any two): remote controls of TVs and other appliances; physiotherapy lamps; infrared detectors on Earth satellites; night vision.
(b) X-rays
- Production: a metal target is bombarded with high-energy electrons (as in a Coolidge tube). The electrons stop suddenly in the target and emit X-rays.

- Uses (any two): diagnosing fractures and other conditions in medicine; treating certain forms of cancer; studying crystal structure.
- 292 marks
Question 29
Electromagnetic waves with wavelength
(i) is suitable for radar systems used in aircraft navigation.
(ii) is used to kill germs in water purifiers.
(iii) is used to improve visibility in runways during fog and mist conditions.
Identify and name the part of the electromagnetic spectrum to which these radiations belong. Also arrange these wavelengths in ascending order of their magnitude.
Solve with AIWritten solution
- (i) : microwaves (about 1 mm – 0.1 m)
- (ii) : ultraviolet (about 1 nm – 400 nm)
- (iii) : infrared (about 700 nm – 1 mm)
Ascending order:

- 301 mark
Question 30
Identify the part of the electromagnetic spectrum which:
(a) Produces heating effect
(b) Is absorbed by the ozone layer in the atmosphere
(c) Is used for studying crystal structure
Solve with AIWritten solution
(a) Infrared. It is readily absorbed by water and other molecules, and increases their thermal motion.
(b) Ultraviolet. The ozone layer, about 40–50 km up, absorbs most of the Sun's UV.
(c) X-rays. Their wavelength (about m) is comparable to the spacing of atoms in a crystal.

- 315 marks
Question 31
Considering the case of a parallel plate capacitor being charged, show how one is required to generalize Ampere's circuital law to include the term due to displacement current.
Solve with AIWritten solution
1. Ampere's law. For steady currents,
where is the current through any surface bounded by the closed loop.
2. The contradiction. A capacitor is charging with current . Take a circular loop around the wire just outside the capacitor.
- With a flat surface bounded by the loop, the wire pierces the surface, so .
- With a pot-shaped surface bounded by the same loop but passing between the plates, no conduction current crosses it, so .
The same loop gives two different answers, so the law must be missing a term.

3. What crosses . An electric field does. With charge on the plates, and , so
This is the displacement current, .
4. The generalised law (Ampere–Maxwell law).
Now both surfaces give : the first through conduction current, the second through displacement current.
- 325 marks
Question 32
(i) Identify the part of the electromagnetic spectrum which is:
(a) suitable for radar system used in aircraft navigation,
(b) produced by bombarding a metal target by high speed electrons.
(ii) Why does a galvanometer show a momentary deflection at the time of charging or discharging a capacitor? Write the necessary expression to explain this observation.
Solve with AIWritten solution
(i) (a) Microwaves. (b) X-rays.
(ii) While the capacitor charges or discharges, the charge on its plates changes, so a conduction current flows in the connecting wires. Across the gap the circuit is completed by an equal displacement current:
In the wires and in the gap , but the total current is the same everywhere. So a current flows through the galvanometer.

The deflection is momentary because once the capacitor is fully charged (or discharged), stops changing: , and so the conduction current stops too.
- 335 marks
Question 33
(a) How does an oscillating charge produce electromagnetic wave? Explain.
(b) Draw a sketch showing the propagation of a plane em wave along the Z-direction, clearly depicting the directions of oscillating electric and magnetic field vectors.
Solve with AIWritten solution
(a) An oscillating charge is continuously accelerated. It produces an electric field that oscillates at its own frequency. This changing electric field produces a changing magnetic field (displacement current), and the changing magnetic field produces a changing electric field (Faraday's law). The fields regenerate each other and spread out as an electromagnetic wave. The wave has the frequency of the oscillating charge, and its energy comes from the source.
(b) along , along , travelling along (). The two fields are in phase:

- 345 marks
Question 34
When an AC source is connected across a capacitor, current starts flowing through the circuit. Show how Ampere's circuital law is generalized to explain the flow of current through the capacitor. Hence, obtain the expression for the displacement current inside the capacitor.
Solve with AIWritten solution
With an ac source, the charge on the plates keeps changing, so the electric field between the plates changes too. No charge crosses the gap, yet a magnetic field is found around it, just as around the wires.
Flux between the plates.
Displacement current.
This equals the conduction current in the wires at every instant.

Generalised (Ampere–Maxwell) law.
In the wires only the first term acts, and between the plates only the second. The current is therefore continuous around the whole circuit.
- 353 marks
Question 35
Answer the following:
(a) Name the em waves which are suitable for radar systems used in aircraft navigation. Write the range of frequency of these waves.
(b) If the earth did not have atmosphere, would its average surface temperature be higher or lower than what it is now? Explain.
Solve with AIWritten solution
(a) Microwaves. Their wavelength range is about 1 mm to 0.1 m, so
That is, in the gigahertz range.
(b) Lower. Visible sunlight passes through the atmosphere and warms the ground. The ground re-radiates this energy as infrared (longer wavelength). Greenhouse gases such as carbon dioxide and water vapour absorb this infrared and trap it, keeping the Earth warm (the greenhouse effect). Without an atmosphere, the infrared would escape straight to space, and the average surface temperature would be much lower.

- 361 mark
Question 36
Microwave oven. The spectrum of electromagnetic radiation contains a part known as microwaves. These waves have frequency and energy smaller than visible light and wavelength larger than it. What is the principle of a microwave oven and how does it work? Our objective is to cook food or warm it up. All food items such as fruit, vegetables, meat, cereals, etc., contain water as a constituent. Now, what does it mean when we say that a certain object has become warmer? When the temperature of a body rises, the energy of the random motion of atoms and molecules increases and the molecules travel or vibrate or rotate with higher energies. The frequency of rotation of water molecules is about 2.45 gigahertz (GHz). If water receives microwaves of this frequency, its molecules absorb this radiation, which is equivalent to heating up water. These molecules share this energy with neighbouring food molecules, heating up the food. One should use porcelain vessels and non metal containers in a microwave oven because of the danger of getting a shock from accumulated electric charges. Metals may also melt from heating. The porcelain container remains unaffected and cool, because its large molecules vibrate and rotate with much smaller frequencies, and thus cannot absorb microwaves. Hence, they do not get heated up. Thus, the basic principle of a microwave oven is to generate microwave radiation of appropriate frequency in the working space of the oven where we keep food. This way energy is not wasted in heating up the vessel. In the conventional heating method, the vessel on the burner gets heated first and then the food inside gets heated because of transfer of energy from the vessel. In the microwave oven, on the other hand, energy is directly delivered to water molecules which is shared by the entire food.
Question: As compared to visible light, microwave has frequency and energy
Solve with AIAnswer
(A) more than visible light
- Correct
(B) less than visible light
(C) equal to visible light
(D) frequency is less but energy is more
Option (B) is correct.
Explanation: Microwaves (about – Hz) have a much lower frequency than visible light (about – Hz). A photon's energy is , so the energy is lower too. (D) is impossible, since energy and frequency rise together.

- 371 mark
Question 37
Microwave oven. The spectrum of electromagnetic radiation contains a part known as microwaves. These waves have frequency and energy smaller than visible light and wavelength larger than it. What is the principle of a microwave oven and how does it work? Our objective is to cook food or warm it up. All food items such as fruit, vegetables, meat, cereals, etc., contain water as a constituent. Now, what does it mean when we say that a certain object has become warmer? When the temperature of a body rises, the energy of the random motion of atoms and molecules increases and the molecules travel or vibrate or rotate with higher energies. The frequency of rotation of water molecules is about 2.45 gigahertz (GHz). If water receives microwaves of this frequency, its molecules absorb this radiation, which is equivalent to heating up water. These molecules share this energy with neighbouring food molecules, heating up the food. One should use porcelain vessels and non metal containers in a microwave oven because of the danger of getting a shock from accumulated electric charges. Metals may also melt from heating. The porcelain container remains unaffected and cool, because its large molecules vibrate and rotate with much smaller frequencies, and thus cannot absorb microwaves. Hence, they do not get heated up. Thus, the basic principle of a microwave oven is to generate microwave radiation of appropriate frequency in the working space of the oven where we keep food. This way energy is not wasted in heating up the vessel. In the conventional heating method, the vessel on the burner gets heated first and then the food inside gets heated because of transfer of energy from the vessel. In the microwave oven, on the other hand, energy is directly delivered to water molecules which is shared by the entire food.
Question: When the temperature of a body rises,
Solve with AIAnswer
- Correct
(A) the energy of the random motion of atoms and molecules increases.
(B) the energy of the random motion of atoms and molecules decreases.
(C) the energy of the random motion of atoms and molecules remains same.
(D) the random motion of atoms and molecules becomes streamlined.
Option (A) is correct.
Explanation: Temperature is a measure of the random (thermal) motion of the particles. When a body warms up, its atoms and molecules travel, vibrate and rotate with more energy. In a microwave oven, this extra energy comes from the microwaves absorbed by the water molecules, which then share it with the rest of the food.
