(i) Draw the V-I characteristics of a - junction diode.
(ii) Differentiate between the threshold voltage and the breakdown voltage for a diode.
(iii) Write the property of a junction diode which makes it suitable for rectification of ac voltages.
Confirming your payment
Previous Year Questions · Question 25 of 37
(i) Draw the V-I characteristics of a - junction diode.
(ii) Differentiate between the threshold voltage and the breakdown voltage for a diode.
(iii) Write the property of a junction diode which makes it suitable for rectification of ac voltages.
(i) In forward bias the current is almost zero up to the threshold voltage and then rises steeply (mA). In reverse bias only a very small, nearly constant current (µA) flows until the breakdown voltage, where it suddenly increases.

(ii)
| Threshold voltage | Breakdown voltage |
|---|---|
| It is a forward-bias voltage. | It is a reverse-bias voltage. |
| Beyond it the forward current increases sharply (about 0.7 V for Si, 0.2 V for Ge). | At it the reverse current increases suddenly and sharply. |
| The diode is normally operated above it in forward bias. | A general-purpose diode is not operated at or beyond it; if the current is not limited the diode is destroyed. |
(iii) A junction diode has a low resistance in forward bias and a very high resistance in reverse bias, so it allows current to flow in one direction only. When an alternating voltage is applied, current flows only in the half-cycles in which the diode is forward biased, which rectifies the ac.