Confirming your payment

Skip to content

Opening your dashboard

Class 12 Chemistry Chapter 4 D and F Block Elements: Previous Year Questions

37 questions on Chapter 4, each solved step by step. Class 12 Chemistry, CBSE 2026-27.

37 questions with solutions

1–5 marks · Hard difficulty

The first 23 solutions are on this page. This chapter is a long one, so the rest open on their own page to keep this one quick to load.

  1. 1

    Question 1

    Match the properties with the elements of the 3d3d series:

    Column I (property)Column II (element)
    (i) Lowest enthalpy of atomisation(p) Sc
    (ii) Shows the maximum number of oxidation states(q) Mn
    (iii) Transition metal that does not form coloured compounds(r) Zn
    (s) Ti
    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) (i)–(r), (ii)–(q), (iii)–(p)

      Correct
    • (B) (i)–(r), (ii)–(s), (iii)–(p)

    • (C) (i)–(p), (ii)–(q), (iii)–(r)

    • (D) (i)–(s), (ii)–(r), (iii)–(p)

    Option (A) is correct.

    Explanation:

    (i) Lowest enthalpy of atomisation: Zn (r). Zinc is [Ar] 3d104s2[\text{Ar}]\,3d^{10}4s^2. It has no unpaired electrons, and its full 3d3d subshell takes no part in metallic bonding, so the bonding is weakest. NCERT Table 4.2 gives ΔaH∘(Zn)=126 kJ mol−1\Delta_aH^\circ(\text{Zn}) = 126\ \text{kJ mol}^{-1}, the lowest in the series.

    Class 12 Chemistry D and F Block Elements

    (ii) Maximum number of oxidation states: Mn (q). Manganese is [Ar] 3d54s2[\text{Ar}]\,3d^5 4s^2. It can use all seven 4s4s and 3d3d electrons, and shows every oxidation state from +2+2 to +7+7.

    (iii) Transition metal that forms no coloured compounds: Sc (p). Scandium shows only the +3+3 state. Sc3+\text{Sc}^{3+} is [Ar] 3d0[\text{Ar}]\,3d^0: with no dd electrons there can be no d–d transition, so its compounds are white or colourless.

    Why the other options fail:

    • (B) matches (ii) with Ti. Ti shows only +2+2, +3+3 and +4+4.
    • (C) gives the lowest atomisation enthalpy to Sc (326 kJ mol−1326\ \text{kJ mol}^{-1}), which is not the lowest. It also calls Zn the transition metal with no coloured compounds, but Zn is not a transition metal.
    • (D) gives (i) to Ti (473 kJ mol−1473\ \text{kJ mol}^{-1}, one of the highest) and (ii) to Zn, which shows only +2+2.
  2. 2

    Question 2

    Which property of transition metals enables them to behave as catalysts?

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) High melting point

    • (B) High ionisation enthalpy

    • (C) Alloy formation

    • (D) Variable oxidation states

      Correct

    Option (D) is correct.

    Explanation: NCERT links the catalytic activity of transition metals and their compounds to their ability to take up more than one oxidation state and to form complexes.

    • A metal ion that can switch between two oxidation states can take electrons from one reactant and pass them on to another. This gives a new, lower-energy path for the reaction.
    • At a solid catalyst surface, the metal uses its 3d3d and 4s4s electrons to form bonds with reactant molecules. This increases the concentration of reactants at the surface and weakens their bonds, so the activation energy is lowered.

    Examples: V2O5\text{V}_2\text{O}_5 in the Contact process, finely divided iron in the Haber process, and nickel in catalytic hydrogenation.

    Why the other options are wrong:

    • (A) A high melting point comes from strong metallic bonding. It keeps a catalyst solid at high temperature, but it does not speed up a reaction.
    • (B) A high ionisation enthalpy would make it harder for the metal to change its oxidation state, which works against catalysis.
    • (C) Alloy formation depends on similar atomic radii. It has nothing to do with catalysis.
  3. 3

    Question 3

    In the two tetrahedral structures of the dichromate ion, Cr2O72−\text{Cr}_2\text{O}_7^{2-}:

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) 4 Cr–O bonds are equivalent in length.

    • (B) 6 Cr–O bonds are equivalent in length.

      Correct
    • (C) All Cr–O bonds are equivalent in length.

    • (D) All Cr–O bonds are non-equivalent.

    Option (B) is correct.

    Explanation: The dichromate ion is made of two CrO4\text{CrO}_4 tetrahedra sharing one corner, with a Cr–O–Cr bond angle of 126∘126^\circ. Each Cr (+6+6) is bonded to four oxygen atoms:

    • three terminal oxygens, bonded to that Cr only;
    • one bridging oxygen, shared with the other Cr.

    2×3=6 terminal Cr–O bonds2×1=2 bridging Cr–O bonds2 \times 3 = 6\ \text{terminal Cr–O bonds} \qquad 2 \times 1 = 2\ \text{bridging Cr–O bonds}

    The multiple-bond character is spread equally over the three terminal Cr–O bonds on each Cr, by resonance. So all 6 terminal bonds are equivalent and have the same length. The 2 bridging Cr–O bonds are single bonds, so they are longer.

    Class 12 Chemistry D and F Block Elements

    • (A) Four equivalent bonds describes the chromate ion, CrO42−\text{CrO}_4^{2-}, which is a single tetrahedron.
    • (C) is wrong because the 2 bridging bonds are longer than the 6 terminal ones.
    • (D) is wrong because the 6 terminal bonds are identical.
  4. 4

    Question 4

    Which of the following ions has the electronic configuration 3d63d^6? (Atomic numbers: Mn = 25, Co = 27, Ni = 28)

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Ni3+\text{Ni}^{3+}

    • (B) Co3+\text{Co}^{3+}

      Correct
    • (C) Mn2+\text{Mn}^{2+}

    • (D) Mn3+\text{Mn}^{3+}

    Option (B) is correct.

    Explanation: When a transition metal forms an ion, it loses its 4s4s electrons first and then 3d3d electrons.

    • Co (Z=27)\text{Co}\ (Z = 27): [Ar] 3d74s2[\text{Ar}]\,3d^7 4s^2. Co3+\text{Co}^{3+} loses both 4s4s electrons and one 3d3d electron, which leaves [Ar] 3d6[\text{Ar}]\,\mathbf{3d^6} (24 electrons).

    Checking the other ions:

    • (A) Ni (Z=28)\text{Ni}\ (Z = 28): [Ar] 3d84s2[\text{Ar}]\,3d^8 4s^2, so Ni3+\text{Ni}^{3+} is 3d73d^7.
    • (C) Mn (Z=25)\text{Mn}\ (Z = 25): [Ar] 3d54s2[\text{Ar}]\,3d^5 4s^2, so Mn2+\text{Mn}^{2+} is 3d53d^5.
    • (D) Mn3+\text{Mn}^{3+} is 3d43d^4.

    Class 12 Chemistry D and F Block Elements

  5. 5

    Question 5

    Which of the following transition metals shows +1 and +2 oxidation states?

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Mn

    • (B) Zn

    • (C) Sc

    • (D) Cu

      Correct

    Option (D) is correct.

    Explanation: Copper is [Ar] 3d104s1[\text{Ar}]\,3d^{10}4s^1.

    • Losing the single 4s4s electron gives Cu+\text{Cu}^+, [Ar] 3d10[\text{Ar}]\,3d^{10}, a completely filled dd subshell. Hence the +1+1 state (for example Cu2O\text{Cu}_2\text{O}, CuI).
    • Losing one more electron, from 3d3d, gives Cu2+\text{Cu}^{2+}, 3d93d^9. In water this is the more stable state, because the strongly negative hydration enthalpy of Cu2+\text{Cu}^{2+} more than compensates for the second ionisation enthalpy. Hence the +2+2 state (for example CuO, CuSO4\text{CuSO}_4).

    Class 12 Chemistry D and F Block Elements

    Checking the others against NCERT Table 4.3:

    • (A) Mn shows +2+2 to +7+7 but not +1+1.
    • (B) Zn shows only +2+2.
    • (C) Sc shows only +3+3.
  6. 6

    Question 6

    Which of the following characteristics of transition metals is associated with their catalytic activity?

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Paramagnetic nature

    • (B) Colour of hydrated ions

    • (C) High enthalpy of atomisation

    • (D) Variable oxidation states

      Correct

    Option (D) is correct.

    Explanation: A transition metal ion can pass easily between two oxidation states. So it can form an unstable intermediate with one reactant and then be regenerated by another, which gives a path with lower activation energy. NCERT's example is iron(III) catalysing the reaction between iodide and persulphate ions:

    2I−+S2O82−→I2+2SO42−2\text{I}^- + \text{S}_2\text{O}_8^{2-} \rightarrow \text{I}_2 + 2\text{SO}_4^{2-}

    The catalyst works in two steps:

    2Fe3++2I−→2Fe2++I22\text{Fe}^{3+} + 2\text{I}^- \rightarrow 2\text{Fe}^{2+} + \text{I}_2

    2Fe2++S2O82−→2Fe3++2SO42−2\text{Fe}^{2+} + \text{S}_2\text{O}_8^{2-} \rightarrow 2\text{Fe}^{3+} + 2\text{SO}_4^{2-}

    Adding the two steps gives back the overall reaction, and the iron ends in its starting +3+3 state. This is only possible because iron switches between +3+3 and +2+2.

    • (A) Paramagnetism comes from unpaired electrons. It explains attraction to a magnetic field, not catalysis.
    • (B) Colour comes from d–d transitions. It has no role in speeding up reactions.
    • (C) A high enthalpy of atomisation reflects strong metallic bonding. It is not what makes a metal a catalyst.
  7. 7

    Question 7

    Which of the following options gives the correct arrangement of the atomic radii of the 3d3d, 4d4d and 5d5d transition series of elements?

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) atomic radii of 3d3d < atomic radii of 4d4d < atomic radii of 5d5d

    • (B) atomic radii of 3d3d < atomic radii of 4d4d ≈ atomic radii of 5d5d

      Correct
    • (C) atomic radii of 3d3d ≈ atomic radii of 4d4d > atomic radii of 5d5d

    • (D) atomic radii of 3d3d > atomic radii of 4d4d > atomic radii of 5d5d

    Option (B) is correct.

    Explanation:

    • 3d→4d3d \rightarrow 4d: a new shell is added, so the atoms become clearly larger.
    • 4d→5d4d \rightarrow 5d: a further increase is expected, but the fourteen 4f4f electrons of the lanthanoids (Ce to Lu) are added between the 4d4d and 5d5d series. A 4f4f electron shields the outer electrons poorly, so the effective nuclear charge rises steadily across the lanthanoids and the atoms contract. This lanthanoid contraction almost exactly cancels the expected increase in size.

    So the 5d5d elements are nearly the same size as the 4d4d elements above them. NCERT's example is Zr 160 pm and Hf 159 pm.

    Class 12 Chemistry D and F Block Elements

    • (A) ignores the lanthanoid contraction.
    • (C) is wrong because the 4d4d atoms are clearly larger than the 3d3d atoms.
    • (D) reverses the normal increase in size down a group.
  8. 8

    Question 8

    "Greater number of electrons from (n−1)d(n-1)d in addition to the nsns electrons are involved in the interatomic metallic bonding."

    Which of the following is a result of the above statement?

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Vanadium forms complexes.

    • (B) Platinum acts as a catalyst.

    • (C) Chromium has a higher melting point than vanadium and manganese.

      Correct
    • (D) Manganese shows oxidation states ranging from +2 to +7.

    Option (C) is correct.

    Explanation: In transition metals, both the nsns and the (n−1)d(n-1)d electrons take part in metallic bonding. The more unpaired electrons an atom can use, the stronger the bonding between atoms, and so the higher the melting point. NCERT (Fig. 4.1) notes that in each series the melting points rise to a maximum at about d5d^5 and then fall, with Mn and Tc anomalously low.

    • Cr (3d54s13d^5 4s^1) has six unpaired electrons available for bonding, the maximum in the 3d3d series. So its metallic bonding is very strong and its melting point is high.
    • Mn (3d54s23d^5 4s^2) has a stable half-filled 3d53d^5 subshell that holds on to its dd electrons, so they take less part in bonding. This is why Mn has a low melting point (and a low enthalpy of atomisation, 281 kJ mol−1281\ \text{kJ mol}^{-1}).

    (The measured melting points of V and Cr are very close, both near 2180 K. The board question follows the NCERT generalisation of a maximum at d5d^5.)

    Why the other options do not follow from the statement:

    • (A) Complex formation comes from small, highly charged ions and vacant dd orbitals, not from metallic bonding.
    • (B) Catalysis comes from variable oxidation states and surface adsorption.
    • (D) The range of oxidation states comes from the similar energies of the 3d3d and 4s4s electrons. It is a property of compounds, not of bonding within the metal.
  9. 9

    Question 9

    Which set of ions exhibits specific colours?

    (Atomic numbers: Sc = 21, Ti = 22, V = 23, Mn = 25, Fe = 26, Ni = 28, Cu = 29 and Zn = 30)

    MCQHardAsked 2021
    1 mark
    Solve with AI
    Answer
    • (A) Sc3+\text{Sc}^{3+}, Ti4+\text{Ti}^{4+}, Mn3+\text{Mn}^{3+}

    • (B) Sc3+\text{Sc}^{3+}, Zn2+\text{Zn}^{2+}, Ni2+\text{Ni}^{2+}

    • (C) V3+\text{V}^{3+}, V2+\text{V}^{2+}, Fe3+\text{Fe}^{3+}

      Correct
    • (D) Ti3+\text{Ti}^{3+}, Ti4+\text{Ti}^{4+}, Ni2+\text{Ni}^{2+}

    Option (C) is correct.

    Explanation: A transition metal ion is coloured when it has a partly filled dd subshell (d1d^1 to d9d^9). An electron can then be excited from a lower-energy dd orbital to a higher-energy one by absorbing visible light, and we see the complementary colour. d0d^0 and d10d^{10} ions cannot undergo such a d–d transition and are colourless.

    IonConfigurationColour (NCERT Table 4.8)
    V3+\text{V}^{3+}[Ar] 3d2[\text{Ar}]\,3d^2green
    V2+\text{V}^{2+}[Ar] 3d3[\text{Ar}]\,3d^3violet
    Fe3+\text{Fe}^{3+}[Ar] 3d5[\text{Ar}]\,3d^5yellow

    All three ions in (C) are coloured.

    Class 12 Chemistry D and F Block Elements

    • (A) contains Sc3+\text{Sc}^{3+} (3d03d^0) and Ti4+\text{Ti}^{4+} (3d03d^0), which are colourless. Only Mn3+\text{Mn}^{3+} (3d43d^4) is coloured.
    • (B) contains Sc3+\text{Sc}^{3+} (3d03d^0) and Zn2+\text{Zn}^{2+} (3d103d^{10}), which are colourless.
    • (D) contains Ti4+\text{Ti}^{4+} (3d03d^0), which is colourless.
  10. 10

    Question 10

    KMnO4\text{KMnO}_4 is coloured due to:

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) d–d transitions.

    • (B) charge transfer from ligand to metal.

      Correct
    • (C) unpaired electrons in the dd orbital of Mn.

    • (D) charge transfer from metal to ligand.

    Option (B) is correct.

    Explanation: In MnO4−\text{MnO}_4^-, manganese is in the +7+7 state:

    x+4(−2)=−1⇒x=+7,Mn7+=[Ar] 3d0x + 4(-2) = -1 \quad\Rightarrow\quad x = +7, \qquad \text{Mn}^{7+} = [\text{Ar}]\,3d^0

    With no dd electrons, a d–d transition is impossible, so by the usual rule the ion should be colourless. Its intense purple colour comes from charge transfer: light in the visible region moves an electron from a filled orbital of the oxygen atoms (the ligands) into an empty orbital of manganese. This is a ligand-to-metal (L→M\text{L} \rightarrow \text{M}) charge transfer. (NCERT notes that the full explanation needs molecular orbital theory, which is beyond the syllabus.)

    • (A) A d–d transition needs at least one dd electron. Mn(VII) has none.
    • (C) MnO4−\text{MnO}_4^- has no unpaired electrons. It is diamagnetic, as NCERT states.
    • (D) A metal-to-ligand transfer would need electrons on the metal to move. Mn(VII) has no dd electrons to give; it is the electron acceptor.
  11. 11

    Question 11

    Assertion (A): Transition metals show their highest oxidation state with oxygen.

    Reason (R): Oxygen has the ability to form multiple bonds to metals.

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Both A and R are true and R is the correct explanation of A.

      Correct
    • (B) Both A and R are true but R is not the correct explanation of A.

    • (C) A is true but R is false.

    • (D) A is false but R is true.

    Option (A) is correct.

    Explanation:

    Assertion is true. The highest oxidation state in the oxides equals the group number, from Sc2O3\text{Sc}_2\text{O}_3 up to Mn2O7\text{Mn}_2\text{O}_7. Oxygen stabilises higher states than even fluorine does:

    MetalHighest fluorideHighest oxide
    MnMnF4\text{MnF}_4 (+4+4)Mn2O7\text{Mn}_2\text{O}_7 (+7+7)

    Reason is true and explains A. NCERT states that "the ability of oxygen to form multiple bonds to metals explains its superiority". One O atom can form a double bond, M=O\text{M}{=}\text{O}, using two electrons of the metal. So only a few O atoms are needed around the metal to reach a high oxidation state, for example 4 around Mn in MnO4−\text{MnO}_4^-. A fluorine atom forms only a single bond, so reaching +7+7 would need seven F atoms crowded round one Mn, which is not possible.

  12. 12

    Question 12

    Assertion (A): Transition metals have high enthalpy of atomisation.

    Reason (R): Greater number of unpaired electrons in transition metals results in weak metallic bonding.

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Both A and R are true and R is the correct explanation of A.

    • (B) Both A and R are true but R is not the correct explanation of A.

    • (C) A is true but R is false.

      Correct
    • (D) A is false but R is true.

    Option (C) is correct.

    Explanation:

    Assertion is true. Most transition metals have enthalpies of atomisation of about 300300 to 500 kJ mol−1500\ \text{kJ mol}^{-1} (NCERT Table 4.2), much higher than the s-block metals.

    Reason is false. Unpaired electrons make metallic bonding stronger, not weaker. Each unpaired (n−1)d(n-1)d electron, along with the nsns electrons, can take part in bonding between atoms. More unpaired electrons means stronger interatomic interaction and a higher enthalpy of atomisation. The data confirm this: the middle of the series (V, 515 kJ mol−1515\ \text{kJ mol}^{-1}) is highest, while Zn, with no unpaired electrons (3d104s23d^{10}4s^2), is lowest at 126 kJ mol−1126\ \text{kJ mol}^{-1}.

    Class 12 Chemistry D and F Block Elements

  13. 13

    Question 13

    Assertion (A): Copper is a non-transition element.

    Reason (R): Copper has completely filled dd orbitals in its ground state.

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Both A and R are true and R is the correct explanation of A.

    • (B) Both A and R are true but R is not the correct explanation of A.

    • (C) A is true but R is false.

    • (D) A is false but R is true.

      Correct

    Option (D) is correct.

    Explanation: By the IUPAC definition, a transition metal has an incomplete dd subshell in the neutral atom or in its ions.

    Reason is true. Because a completely filled dd subshell is especially stable, copper is [Ar] 3d104s1[\text{Ar}]\,3d^{10}4s^1, not 3d94s23d^9 4s^2. So the dd subshell is full in the ground-state atom.

    Assertion is false. In its common +2+2 state, Cu2+\text{Cu}^{2+} is [Ar] 3d9[\text{Ar}]\,3d^9, an incomplete dd subshell. So copper is a transition element. Its Cu2+\text{Cu}^{2+} compounds are coloured and paramagnetic, as expected for a transition metal.

    Class 12 Chemistry D and F Block Elements

    Contrast this with zinc: Zn (3d104s23d^{10}4s^2) and Zn2+\text{Zn}^{2+} (3d103d^{10}) both have full dd subshells, so zinc is not regarded as a transition element.

  14. 14

    Question 14

    Assertion (A): Ionisation enthalpy of Fe2+\text{Fe}^{2+} is lower than that of Mn2+\text{Mn}^{2+}.

    Reason (R): Fe2+\text{Fe}^{2+} has 3d54s13d^5 4s^1 configuration, making the state highly stable.

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Both A and R are true and R is the correct explanation of A.

    • (B) Both A and R are true but R is not the correct explanation of A.

    • (C) A is true but R is false.

      Correct
    • (D) A is false but R is true.

    Option (C) is correct.

    Explanation:

    Assertion is true. The ionisation enthalpy of M2+\text{M}^{2+} is the third ionisation enthalpy of M. NCERT Table 4.2 gives:

    ΔiH3(Fe)=2962 kJ mol−1ΔiH3(Mn)=3260 kJ mol−1\Delta_iH_3(\text{Fe}) = 2962\ \text{kJ mol}^{-1} \qquad \Delta_iH_3(\text{Mn}) = 3260\ \text{kJ mol}^{-1}

    • Mn2+\text{Mn}^{2+} is 3d53d^5, a half-filled subshell with the maximum exchange energy. Removing an electron destroys this stable arrangement, so it is hard.
    • Fe2+\text{Fe}^{2+} is 3d63d^6. Removing the one paired electron gives Fe3+\text{Fe}^{3+}, 3d53d^5, so it is easier.

    Class 12 Chemistry D and F Block Elements

    Reason is false. When iron ionises, the 4s4s electrons are lost first, so Fe2+\text{Fe}^{2+} is [Ar] 3d6[\text{Ar}]\,3d^6 with no 4s4s electrons. It is not 3d54s13d^5 4s^1.

  15. 15

    Question 15

    Assertion (A): Transition metals have low melting points.

    Reason (R): The involvement of greater number of (n−1)d(n-1)d and nsns electrons in the interatomic metallic bonding.

    MCQHardAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) Both A and R are true and R is the correct explanation of A.

    • (B) Both A and R are true but R is not the correct explanation of A.

    • (C) A is true but R is false.

    • (D) A is false but R is true.

      Correct

    Option (D) is correct.

    Explanation:

    Assertion is false. Apart from Zn, Cd and Hg, the transition metals are hard, have low volatility and have high melting points. Many melt above 1800 K, and tungsten melts at about 3700 K.

    Reason is true. In transition metals, the (n−1)d(n-1)d electrons as well as the nsns electrons take part in metallic bonding. More electrons in bonding gives stronger bonding between atoms. This is exactly why the melting points are high, rising to a maximum at about d5d^5 in each series (NCERT Fig. 4.1).

    So R is a correct statement, but it explains high melting points, the opposite of what A claims.

  16. 16

    Question 16

    Write the formula of an oxo-anion of manganese (Mn) in which it shows the oxidation state equal to its group number.

    HardAsked 2017
    1 mark
    Solve with AI
    Written solution

    Manganese is in group 7, so we need an oxo-anion in which Mn is in the +7+7 state. This is the permanganate ion, MnO4−\text{MnO}_4^-.

    Check:

    x+4(−2)=−1⇒x=+7x + 4(-2) = -1 \quad\Rightarrow\quad x = +7

    Mn uses all seven of its 3d54s23d^5 4s^2 electrons, so its oxidation state equals the group number.

  17. 17

    Question 17

    Complete and balance the following chemical equations:

    (a) Fe2++MnO4−+H+→\text{Fe}^{2+} + \text{MnO}_4^- + \text{H}^+ \rightarrow

    (b) MnO4−+H2O+I−→\text{MnO}_4^- + \text{H}_2\text{O} + \text{I}^- \rightarrow

    HardAsked 2018
    2 marks
    Solve with AI
    Written solution

    (a) In acidic medium, permanganate (Mn +7+7) is reduced to Mn2+\text{Mn}^{2+} and iron(II) is oxidised to iron(III).

    MnO4−+8H++5e−→Mn2++4H2O\text{MnO}_4^- + 8\text{H}^+ + 5e^- \rightarrow \text{Mn}^{2+} + 4\text{H}_2\text{O}

    5Fe2+→5Fe3++5e−5\text{Fe}^{2+} \rightarrow 5\text{Fe}^{3+} + 5e^-

    Adding the two half-reactions:

    5Fe2++MnO4−+8H+→5Fe3++Mn2++4H2O\mathbf{5\text{Fe}^{2+} + \text{MnO}_4^- + 8\text{H}^+ \rightarrow 5\text{Fe}^{3+} + \text{Mn}^{2+} + 4\text{H}_2\text{O}}

    Check: Fe 5 = 5, Mn 1 = 1, O 4 = 4, H 8 = 8. Charge: (+10)+(−1)+(+8)=+17(+10) + (-1) + (+8) = +17 on the left and (+15)+(+2)=+17(+15) + (+2) = +17 on the right.

    (b) With no acid (neutral or faintly alkaline medium), permanganate is reduced only to MnO2\text{MnO}_2 (Mn +4+4). It oxidises iodide to iodate, IO3−\text{IO}_3^- (I +5+5).

    MnO4−+2H2O+3e−→MnO2+4OH−(×2)\text{MnO}_4^- + 2\text{H}_2\text{O} + 3e^- \rightarrow \text{MnO}_2 + 4\text{OH}^- \quad (\times 2)

    I−+6OH−→IO3−+3H2O+6e−\text{I}^- + 6\text{OH}^- \rightarrow \text{IO}_3^- + 3\text{H}_2\text{O} + 6e^-

    Adding the half-reactions and cancelling 3H2O3\text{H}_2\text{O} and 6OH−6\text{OH}^- from both sides:

    2MnO4−+H2O+I−→2MnO2+2OH−+IO3−\mathbf{2\text{MnO}_4^- + \text{H}_2\text{O} + \text{I}^- \rightarrow 2\text{MnO}_2 + 2\text{OH}^- + \text{IO}_3^-}

    Check: Mn 2 = 2, I 1 = 1, H 2 = 2, O 8+1=98 + 1 = 9 and 4+2+3=94 + 2 + 3 = 9. Charge: −2−1=−3-2 - 1 = -3 on the left and −2−1=−3-2 - 1 = -3 on the right.

    Class 12 Chemistry D and F Block Elements

  18. 18

    Question 18

    Consider the following ions: Mn3+\text{Mn}^{3+}, V3+\text{V}^{3+}, Cr3+\text{Cr}^{3+}, Ti4+\text{Ti}^{4+}

    (Atomic numbers: Mn = 25, V = 23, Cr = 24, Ti = 22)

    (a) Which ion is most stable in an aqueous solution?

    (b) Which ion is the strongest oxidising agent?

    (c) Which ion is colourless?

    (d) Which ion has the highest number of unpaired electrons?

    HardAsked 2017
    2 marks
    Solve with AI
    Written solution

    Configurations of the ions (the 4s4s electrons are lost first):

    IonConfigurationUnpaired electrons
    Mn3+\text{Mn}^{3+}[Ar] 3d4[\text{Ar}]\,3d^44
    V3+\text{V}^{3+}[Ar] 3d2[\text{Ar}]\,3d^22
    Cr3+\text{Cr}^{3+}[Ar] 3d3[\text{Ar}]\,3d^33
    Ti4+\text{Ti}^{4+}[Ar] 3d0[\text{Ar}]\,3d^00

    Class 12 Chemistry D and F Block Elements

    (a) Cr3+\text{Cr}^{3+}. Its E∘(Cr3+/Cr2+)E^\circ(\text{Cr}^{3+}/\text{Cr}^{2+}) is −0.41-0.41 V, so it has little tendency to be reduced. Its d3d^3 configuration is especially stable in water: NCERT links this to a half-filled t2gt_{2g} level. Neither losing nor gaining an electron is favourable, so Cr3+\text{Cr}^{3+} is the most stable of the four in water.

    (b) Mn3+\text{Mn}^{3+}. E∘(Mn3+/Mn2+)=+1.57E^\circ(\text{Mn}^{3+}/\text{Mn}^{2+}) = +1.57 V, which is large and positive. Mn3+\text{Mn}^{3+} (d4d^4) readily takes one electron to become Mn2+\text{Mn}^{2+}, with a very stable half-filled d5d^5 configuration.

    (c) Ti4+\text{Ti}^{4+}. It is 3d03d^0. With no dd electrons, no d–d transition can occur, so it is colourless.

    (d) Mn3+\text{Mn}^{3+}, with 4 unpaired electrons (3d43d^4).

  19. 19

    Question 19

    Explain the following observations:

    (i) Silver atom has completely filled dd orbitals (4d104d^{10}) in its ground state, yet it is regarded as a transition element.

    (ii) E∘E^\circ value for the Mn3+/Mn2+\text{Mn}^{3+}/\text{Mn}^{2+} couple is much more positive than that for Cr3+/Cr2+\text{Cr}^{3+}/\text{Cr}^{2+}.

    HardAsked 2017
    2 marks
    Solve with AI
    Written solution

    (i) A transition element is one that has an incomplete dd subshell either in the atom or in any of its ions.

    Ag:[Kr] 4d105s1Ag2+:[Kr] 4d9\text{Ag}: [\text{Kr}]\,4d^{10}5s^1 \qquad \text{Ag}^{2+}: [\text{Kr}]\,4d^9

    The dd subshell of the silver atom is full, but silver can show the +2+2 oxidation state (for example in AgF2\text{AgF}_2). In that state it has an incompletely filled 4d4d subshell (4d94d^9). So silver is a transition element.

    (ii) E∘(Mn3+/Mn2+)=+1.57E^\circ(\text{Mn}^{3+}/\text{Mn}^{2+}) = +1.57 V, while E∘(Cr3+/Cr2+)=−0.41E^\circ(\text{Cr}^{3+}/\text{Cr}^{2+}) = -0.41 V.

    • Manganese: Mn3+\text{Mn}^{3+} (3d43d^4) + e−→Mn2+e^- \rightarrow \text{Mn}^{2+} (3d53d^5). The product has the extra-stable half-filled d5d^5 configuration. Put the other way, turning Mn2+\text{Mn}^{2+} into Mn3+\text{Mn}^{3+} means removing an electron from d5d^5. This is why the third ionisation enthalpy of Mn is so high (3260 kJ mol−13260\ \text{kJ mol}^{-1}, against 29902990 for Cr). So Mn3+\text{Mn}^{3+} is very easily reduced, and its E∘E^\circ is strongly positive.
    • Chromium: Cr3+\text{Cr}^{3+} (3d33d^3) + e−→Cr2+e^- \rightarrow \text{Cr}^{2+} (3d43d^4). This reduction destroys the stable d3d^3 configuration (half-filled t2gt_{2g} level in water, as NCERT notes), so it is not favourable and E∘E^\circ is negative. In fact Cr2+\text{Cr}^{2+} is a strong reducing agent.

    Class 12 Chemistry D and F Block Elements

  20. 20

    Question 20

    When MnO2\text{MnO}_2 is fused with KOH in the presence of KNO3\text{KNO}_3 as an oxidising agent, it gives a dark green compound (A). Compound (A) disproportionates in acidic solution to give a purple compound (B). An alkaline solution of compound (B) oxidises KI to compound (C), whereas an acidified solution of compound (B) oxidises KI to (D). Identify (A), (B), (C) and (D).

    HardAsked 2019
    2 marks
    Solve with AI
    Written solution

    (A) = K2MnO4\text{K}_2\text{MnO}_4 (potassium manganate, dark green). Mn is oxidised from +4+4 to +6+6 by the nitrate:

    MnO2+2KOH+KNO3→fuseK2MnO4+KNO2+H2O\text{MnO}_2 + 2\text{KOH} + \text{KNO}_3 \xrightarrow{\text{fuse}} \text{K}_2\text{MnO}_4 + \text{KNO}_2 + \text{H}_2\text{O}

    (B) = KMnO4\text{KMnO}_4 (potassium permanganate, purple). In acid, manganate(VI) disproportionates to manganate(VII) and manganese(IV):

    3MnO42−+4H+→2MnO4−+MnO2+2H2O3\text{MnO}_4^{2-} + 4\text{H}^+ \rightarrow 2\text{MnO}_4^- + \text{MnO}_2 + 2\text{H}_2\text{O}

    (C) = KIO3\text{KIO}_3 (potassium iodate). In alkaline or neutral solution, MnO4−\text{MnO}_4^- is reduced only to MnO2\text{MnO}_2, and iodide is oxidised to iodate:

    2MnO4−+H2O+I−→2MnO2+2OH−+IO3−2\text{MnO}_4^- + \text{H}_2\text{O} + \text{I}^- \rightarrow 2\text{MnO}_2 + 2\text{OH}^- + \text{IO}_3^-

    (D) = I2\text{I}_2 (iodine). In acid, MnO4−\text{MnO}_4^- is reduced to Mn2+\text{Mn}^{2+}, and iodide is oxidised only to iodine:

    10I−+2MnO4−+16H+→2Mn2++8H2O+5I210\text{I}^- + 2\text{MnO}_4^- + 16\text{H}^+ \rightarrow 2\text{Mn}^{2+} + 8\text{H}_2\text{O} + 5\text{I}_2

    Class 12 Chemistry D and F Block Elements

  21. 21

    Question 21

    When FeCr2O4\text{FeCr}_2\text{O}_4 is fused with Na2CO3\text{Na}_2\text{CO}_3 in the presence of air, it gives a yellow solution of compound (A). Compound (A) on acidification gives compound (B). Compound (B) on reaction with KCl forms an orange coloured compound (C). An acidified solution of compound (C) oxidises Na2SO3\text{Na}_2\text{SO}_3 to (D). Identify (A), (B), (C) and (D).

    HardAsked 2019
    2 marks
    Solve with AI
    Written solution

    (A) = Na2CrO4\text{Na}_2\text{CrO}_4 (sodium chromate, yellow). Chromite ore is fused with sodium carbonate in free access of air:

    4FeCr2O4+8Na2CO3+7O2→8Na2CrO4+2Fe2O3+8CO24\text{FeCr}_2\text{O}_4 + 8\text{Na}_2\text{CO}_3 + 7\text{O}_2 \rightarrow 8\text{Na}_2\text{CrO}_4 + 2\text{Fe}_2\text{O}_3 + 8\text{CO}_2

    (B) = Na2Cr2O7\text{Na}_2\text{Cr}_2\text{O}_7 (sodium dichromate, orange). Acidifying converts chromate into dichromate. This is not a redox change: Cr is +6+6 in both ions.

    2Na2CrO4+2H+→Na2Cr2O7+2Na++H2O2\text{Na}_2\text{CrO}_4 + 2\text{H}^+ \rightarrow \text{Na}_2\text{Cr}_2\text{O}_7 + 2\text{Na}^+ + \text{H}_2\text{O}

    (C) = K2Cr2O7\text{K}_2\text{Cr}_2\text{O}_7 (potassium dichromate, orange crystals). It is less soluble than the sodium salt, so it crystallises out:

    Na2Cr2O7+2KCl→K2Cr2O7+2NaCl\text{Na}_2\text{Cr}_2\text{O}_7 + 2\text{KCl} \rightarrow \text{K}_2\text{Cr}_2\text{O}_7 + 2\text{NaCl}

    (D) = Na2SO4\text{Na}_2\text{SO}_4 (sodium sulphate). Acidified dichromate oxidises sulphite (S +4+4) to sulphate (S +6+6), and is itself reduced to green Cr3+\text{Cr}^{3+}:

    Cr2O72−+3SO32−+8H+→2Cr3++3SO42−+4H2O\text{Cr}_2\text{O}_7^{2-} + 3\text{SO}_3^{2-} + 8\text{H}^+ \rightarrow 2\text{Cr}^{3+} + 3\text{SO}_4^{2-} + 4\text{H}_2\text{O}

    Check: Cr 2 = 2, S 3 = 3, O 7+9=167 + 9 = 16 and 12+4=1612 + 4 = 16, H 8 = 8. Charge: −2−6+8=0-2 - 6 + 8 = 0 and +6−6=0+6 - 6 = 0.

    Class 12 Chemistry D and F Block Elements

  22. 22

    Question 22

    Rohan was carrying out the reaction of potassium iodide with potassium permanganate in acidic medium, and iodine was liberated from the potassium iodide. When he repeated the reaction for further study, he forgot to add acid. He observed that the products formed in the second case were different from the first.

    (i) Give the possible chemical reactions in both cases.

    (ii) Give the reason for the difference in observation.

    (iii) Give the structure of MnO4−\text{MnO}_4^-.

    HardAsked 2023
    3 marks
    Solve with AI
    Written solution

    (i) With acid: MnO4−\text{MnO}_4^- is reduced to Mn2+\text{Mn}^{2+}, and iodide is oxidised to iodine.

    10I−+2MnO4−+16H+→2Mn2++8H2O+5I210\text{I}^- + 2\text{MnO}_4^- + 16\text{H}^+ \rightarrow 2\text{Mn}^{2+} + 8\text{H}_2\text{O} + 5\text{I}_2

    Without acid (neutral or faintly alkaline): MnO4−\text{MnO}_4^- is reduced to MnO2\text{MnO}_2 (a brown precipitate), and iodide is oxidised to iodate.

    2MnO4−+H2O+I−→2MnO2+2OH−+IO3−2\text{MnO}_4^- + \text{H}_2\text{O} + \text{I}^- \rightarrow 2\text{MnO}_2 + 2\text{OH}^- + \text{IO}_3^-

    (ii) The hydrogen ion concentration decides how far permanganate is reduced:

    MnO4−+8H++5e−→Mn2++4H2OE∘=+1.52 V\text{MnO}_4^- + 8\text{H}^+ + 5e^- \rightarrow \text{Mn}^{2+} + 4\text{H}_2\text{O} \qquad E^\circ = +1.52\ \text{V}

    MnO4−+4H++3e−→MnO2+2H2OE∘=+1.69 V\text{MnO}_4^- + 4\text{H}^+ + 3e^- \rightarrow \text{MnO}_2 + 2\text{H}_2\text{O} \qquad E^\circ = +1.69\ \text{V}

    In acid, plenty of H+\text{H}^+ is available to remove all four oxygen atoms as water, so Mn goes from +7+7 to +2+2 (5 electrons). Without acid, there is not enough H+\text{H}^+, so the reduction stops at MnO2\text{MnO}_2 (Mn +4+4, 3 electrons). The iodide product also depends on the medium: in acid, iodide is oxidised only to I2\text{I}_2, while in neutral or faintly alkaline solution it is oxidised further, to iodate (IO3−\text{IO}_3^-, I +5+5), as NCERT's equation shows.

    Class 12 Chemistry D and F Block Elements

    (iii) MnO4−\text{MnO}_4^- is tetrahedral. Mn (+7+7, 3d03d^0) sits at the centre with four O atoms at the corners. The π\pi bonding is spread equally over all four Mn–O bonds by resonance, so all four bonds are equivalent.

    Class 12 Chemistry D and F Block Elements

  23. 23

    Question 23

    Consider the standard electrode potential values, E∘(M2+/M)E^\circ(\text{M}^{2+}/\text{M}) in volts, of the elements of the first transition series:

    TiVCrMnFeCoNiCuZn
    −1.63-1.63−1.18-1.18−0.90-0.90−1.18-1.18−0.44-0.44−0.28-0.28−0.25-0.25+0.34+0.34−0.76-0.76

    Explain:

    (i) The E∘E^\circ value for copper is positive.

    (ii) The E∘E^\circ value of Mn is more negative than expected from the trend.

    (iii) Cr2+\text{Cr}^{2+} is a stronger reducing agent than Fe2+\text{Fe}^{2+}.

    HardAsked 2017
    3 marks
    Solve with AI
    Written solution

    Turning a metal into its aqueous ion, M(s)→M2+(aq)\text{M(s)} \rightarrow \text{M}^{2+}(\text{aq}), costs the enthalpy of atomisation and the first two ionisation enthalpies, and gives back the hydration enthalpy. The larger the net cost, the less negative (more positive) E∘E^\circ is.

    Class 12 Chemistry D and F Block Elements

    (i) For copper (NCERT Table 4.4):

    ΔaH+ΔiH1+ΔiH2+ΔhydH=339+745+1958−2121=+921 kJ mol−1\Delta_aH + \Delta_iH_1 + \Delta_iH_2 + \Delta_{hyd}H = 339 + 745 + 1958 - 2121 = +921\ \text{kJ mol}^{-1}

    Copper has a high enthalpy of atomisation and a very high second ionisation enthalpy (3d103d^{10} must be broken). The hydration enthalpy of Cu2+\text{Cu}^{2+} does not balance these, so the net energy needed is the largest in the series. So Cu has little tendency to form Cu2+\text{Cu}^{2+}(aq), and E∘E^\circ is positive (+0.34+0.34 V). This is also why copper does not liberate H2\text{H}_2 from dilute acids.

    (ii) Mn2+\text{Mn}^{2+} is 3d53d^5, a stable half-filled subshell. So the second ionisation enthalpy of Mn (1509 kJ mol−11509\ \text{kJ mol}^{-1}) is lower than that of Cr (15921592). Mn also has a low enthalpy of atomisation (279 kJ mol−1279\ \text{kJ mol}^{-1}). The net energy needed to form Mn2+\text{Mn}^{2+}(aq) (643 kJ mol−1643\ \text{kJ mol}^{-1}) is therefore less than for Cr (718718), and E∘E^\circ is more negative (−1.18-1.18 V) than the trend would suggest.

    (iii) E∘(Cr3+/Cr2+)=−0.41E^\circ(\text{Cr}^{3+}/\text{Cr}^{2+}) = -0.41 V, while E∘(Fe3+/Fe2+)=+0.77E^\circ(\text{Fe}^{3+}/\text{Fe}^{2+}) = +0.77 V. So Cr2+\text{Cr}^{2+} gives up an electron far more readily.

    • Cr2+\text{Cr}^{2+} (d4d^4) →\rightarrow Cr3+\text{Cr}^{3+} (d3d^3): the product has the stable d3d^3 configuration (a half-filled t2gt_{2g} level, as NCERT notes), so the oxidation is favoured.
    • Fe2+\text{Fe}^{2+} (d6d^6) →\rightarrow Fe3+\text{Fe}^{3+} (d5d^5): the product is also stable, but Fe3+\text{Fe}^{3+} is readily reduced back (E∘E^\circ positive), so Fe2+\text{Fe}^{2+} is only a weak reducing agent.

    Hence Cr2+\text{Cr}^{2+} is the stronger reducing agent. It can even liberate H2\text{H}_2 from dilute acid: 2Cr2++2H+→2Cr3++H22\text{Cr}^{2+} + 2\text{H}^+ \rightarrow 2\text{Cr}^{3+} + \text{H}_2.

  24. 24

    Question 24

    Write the preparation of the following:

    (i) KMnO4\text{KMnO}_4 from K2MnO4\text{K}_2\text{MnO}_4

    (ii) Na2CrO4\text{Na}_2\text{CrO}_4 from FeCr2O4\text{FeCr}_2\text{O}_4

    (iii) Cr2O72−\text{Cr}_2\text{O}_7^{2-} from CrO42−\text{CrO}_4^{2-}

    HardAsked 2018
    3 marks
  25. 25

    Question 25

    Give reasons:

    (a) E∘E^\circ value for the Mn3+/Mn2+\text{Mn}^{3+}/\text{Mn}^{2+} couple is much more positive than that for Fe3+/Fe2+\text{Fe}^{3+}/\text{Fe}^{2+}.

    (b) Iron has a higher enthalpy of atomisation than copper.

    (c) Sc3+\text{Sc}^{3+} is colourless in aqueous solution whereas Ti3+\text{Ti}^{3+} is coloured.

    HardAsked 2018
    3 marks
  26. 26

    Question 26

    Give reasons for the following:

    (a) Transition metals show variable oxidation states.

    (b) E∘E^\circ value for Zn2+/Zn\text{Zn}^{2+}/\text{Zn} is negative while that for Cu2+/Cu\text{Cu}^{2+}/\text{Cu} is positive.

    (c) The highest oxidation state of Mn with fluorine is +4+4, whereas with oxygen it is +7+7.

    HardAsked 2019
    3 marks
  27. 27

    Question 27

    Observed and calculated values of the standard electrode potentials, E∘(M2+/M)E^\circ(\text{M}^{2+}/\text{M}), of the elements from Ti to Zn in the first transition series are shown in the figure.

    Class 12 Chemistry D and F Block Elements

    Explain the following observations:

    (i) The general trend towards less negative E∘E^\circ values across the series.

    (ii) The unique behaviour of copper.

    (iii) More negative E∘E^\circ values of Mn and Zn.

    HardAsked 2021
    3 marks
  28. 28

    Question 28

    The following ions are given:

    Cr2+\text{Cr}^{2+}, Cu2+\text{Cu}^{2+}, Cu+\text{Cu}^+, Fe2+\text{Fe}^{2+}, Fe3+\text{Fe}^{3+}, Mn3+\text{Mn}^{3+}

    Identify the ion which is:

    (i) a strong reducing agent.

    (ii) unstable in aqueous solution.

    (iii) a strong oxidising agent.

    Give a suitable reason in each case.

    HardAsked 2020
    3 marks
  29. 29

    Question 29

    Identify the following:

    (i) The oxo-anion of chromium which is stable in acidic medium.

    (ii) The lanthanoid element that exhibits the +4+4 oxidation state.

    HardAsked 2017
    2 marks
  30. 30

    Question 30

    Explain the following:

    (a) Out of Sc3+\text{Sc}^{3+}, Co2+\text{Co}^{2+} and Cr3+\text{Cr}^{3+} ions, only Sc3+\text{Sc}^{3+} is colourless in aqueous solutions. (Atomic numbers: Co = 27, Sc = 21, Cr = 24)

    (b) E∘(Cu2+/Cu)E^\circ(\text{Cu}^{2+}/\text{Cu}) for copper metal is positive (+0.34+0.34 V), unlike the remaining members of the first transition series.

    (c) La(OH)3\text{La(OH)}_3 is more basic than Lu(OH)3\text{Lu(OH)}_3.

    HardAsked 2018
    3 marks
  31. 31

    Question 31

    Attempt any five of the following:

    (a) Which of the following ions will have a magnetic moment value of 1.73 BM?

    Sc3+\text{Sc}^{3+}, Ti3+\text{Ti}^{3+}, Ti2+\text{Ti}^{2+}, Cu2+\text{Cu}^{2+}, Zn2+\text{Zn}^{2+}

    (b) In order to protect iron from corrosion, which one will you prefer as a sacrificial electrode, Ni or Zn? Why? (Given: standard electrode potentials of Ni, Fe and Zn are −0.25-0.25 V, −0.44-0.44 V and −0.76-0.76 V respectively.)

    (c) The second ionisation enthalpies of chromium and manganese are 1592 and 1509 kJ mol−11509\ \text{kJ mol}^{-1} respectively. Explain the lower value of Mn.

    (d) Give two similarities in the properties of Sc and Zn.

    (e) What is actinoid contraction? What causes actinoid contraction?

    (f) What is the oxidation state of chromium in the chromate ion and the dichromate ion?

    (g) Write the ionic equation for the reaction of KI with acidified KMnO4\text{KMnO}_4.

    HardAsked 2023
    5 marks
  32. 32

    Question 32

    (a) A transition element X has the electronic configuration [Ar] 4s23d3[\text{Ar}]\,4s^2 3d^3. Predict its likely oxidation states.

    (b) Complete the reaction, mentioning all the products formed:

    2KMnO4→ Δ 2\text{KMnO}_4 \xrightarrow{\ \Delta\ }

    (c) Account for the following:

    (i) In the 3d3d transition series, zinc has the lowest enthalpy of atomisation.

    (ii) Cu+\text{Cu}^+ ion is unstable in aqueous solution.

    (iii) Actinoids show more oxidation states than lanthanoids.

    HardAsked 2023
    5 marks
  33. 33

    Question 33

    (a) Write the number of unpaired electrons in Cr3+\text{Cr}^{3+}. (Atomic number of Cr = 24)

    (b) Complete the reaction, mentioning all the products formed:

    Cr2O72−+3H2S+8H+→\text{Cr}_2\text{O}_7^{2-} + 3\text{H}_2\text{S} + 8\text{H}^+ \rightarrow

    (c) Account for the following:

    (i) Mn2+\text{Mn}^{2+} is more stable than Fe2+\text{Fe}^{2+} towards oxidation to the +3+3 state.

    (ii) Copper has an exceptionally positive E∘(M2+/M)E^\circ(\text{M}^{2+}/\text{M}) value.

    (iii) Eu2+\text{Eu}^{2+}, with electronic configuration [Xe] 4f76s0[\text{Xe}]\,4f^7 6s^0, is a strong reducing agent.

    HardAsked 2023
    5 marks
  34. 34

    Question 34

    (I) Account for the following: [3]

    (i) E∘E^\circ value for the Mn3+/Mn2+\text{Mn}^{3+}/\text{Mn}^{2+} couple is much more positive than that for Cr3+/Cr2+\text{Cr}^{3+}/\text{Cr}^{2+}.

    (ii) Sc3+\text{Sc}^{3+} is colourless whereas Ti3+\text{Ti}^{3+} is coloured in an aqueous solution.

    (iii) Actinoids show a wide range of oxidation states.

    (II) Write the chemical equations for the preparation of KMnO4\text{KMnO}_4 from MnO2\text{MnO}_2. [2]

    HardAsked 2023
    5 marks
  35. 35

    Question 35

    (I) Account for the following:

    (i) Transition metals form alloys.

    (ii) Ce4+\text{Ce}^{4+} is a strong oxidising agent.

    (II) Write one similarity and one difference between the chemistry of lanthanoids and actinoids.

    (III) Complete the following ionic equation:

    Cr2O72−+2OH−→\text{Cr}_2\text{O}_7^{2-} + 2\text{OH}^- \rightarrow

    HardAsked 2023
    5 marks
  36. 36

    Question 36

    Read the passage and answer the questions that follow.

    The transition metals, when exposed to oxygen at low and intermediate temperatures, form thin, protective oxide films of up to some thousands of Angstroms in thickness. Transition metal oxides lie between the extremes of ionic and covalent binary compounds formed by elements from the left or right side of the periodic table. They range from metallic to semiconducting and deviate by both large and small degrees from stoichiometry. Since dd-electron bonding levels are involved, the cations exist in various valence states and hence give rise to a large number of oxides. The crystal structures are often classified by considering a cubic or hexagonal close-packed lattice of one set of ions with the other set of ions filling the octahedral or tetrahedral interstices. The actual oxide structures, however, generally show departures from such regular arrays, due in part to distortions caused by packing of ions of different size and to ligand field effects. These distortions depend not only on the number of dd electrons but also on the valence and the position of the transition metal in a period or group.

    (i) Why does copper, which is in the first series of transition metals, exhibit the +1+1 oxidation state most frequently? [1]

    (ii) The lowest oxide of a transition metal is basic. Why? [1]

    (iii) How is the variability in oxidation states of dd-block elements different from that of pp-block elements? [1]

    (iv) The crystal structures of oxides of transition metals often show defects. Give a reason. [1]

    HardAsked 2021
    4 marks
  37. 37

    Question 37

    Read the passage and answer the questions that follow.

    In transition elements, ions of the same charge in a given series generally show a progressive decrease in radius with increasing atomic number. This is because the new electron enters a dd orbital each time the nuclear charge increases by unity. But the radii of the third (5d5d) series are virtually the same as those of the corresponding members of the second series. This is associated with the intervention of the 4f4f orbitals, which must be filled before the 5d5d series of elements begins. The filling of 4f4f before 5d5d orbitals results in a regular decrease in atomic radii called the lanthanoid contraction.

    (i) Among the following ions of the 3d3d series, which acts as the strongest oxidising agent? (Atomic numbers: Ti = 22, V = 23, Cr = 24, Mn = 25)

    (A) Ti4+\text{Ti}^{4+}    (B) V2+\text{V}^{2+}    (C) Mn3+\text{Mn}^{3+}    (D) Cr3+\text{Cr}^{3+} [1]

    (ii) Which of the following ions is colourless?

    (A) Ti4+\text{Ti}^{4+}    (B) Fe2+\text{Fe}^{2+}    (C) Mn3+\text{Mn}^{3+}    (D) Ni2+\text{Ni}^{2+} [1]

    (iii) The atomic radii of the third series of transition elements are similar to those of the second series because the 4f4f orbitals must be filled before the 5d5d series begins. This is called:

    (A) d–d transition    (B) lanthanoid contraction    (C) inert pair effect    (D) charge transfer from metal to ligand [1]

    (iv) Which pair of elements has similar radii?

    (A) Zr, Hf    (B) Cr, Ni    (C) Hg, Cd    (D) La, Hf [1]

    HardAsked 2021
    4 marks