(i)
The lamps are connected in parallel, as indicated by the circuit diagram, where each lamp is connected across the same two points of the battery. In a parallel combination, each lamp gets the full potential of the battery.
(ii)
The advantages of parallel connection are:
- Independent operation of lamps: If one lamp is faulty or switched off, it will not affect the operation of the other lamps.
- Each lamp gets the full voltage: All lamps receive the same voltage from the battery, which ensures each lamp operates at its rated brightness and power.
(iii)
The lamp with the highest power will glow the brightest. The power P of each lamp is given by the formula:
P=V×I
Where:
- P is the power,
- V is the voltage across the lamp (60 V),
- I is the current through the lamp.
Given:
- Lamp A: I=3A, PA=3×60=180W
- Lamp B: I=4A, PB=4×60=240W
- Lamp C: I=5A, PC=5×60=300W
- Lamp D: I=3A, PD=3×60=180W
Conclusion:
Lamp C has the highest current (5 A), so it has the highest power of 300 W, and thus it will glow the brightest.
(iv)
To find the total resistance in a parallel circuit, we use the formula:
Rtotal1=RA1+RB1+RC1+RD1
We can find the resistance of each lamp using Ohm's law:
R=IV
Substitute the given values for each lamp:
- For Lamp A: RA=360=20Ω
- For Lamp B: RB=460=15Ω
- For Lamp C: RC=560=12Ω
- For Lamp D: RD=360=20Ω
Now, substitute these into the parallel resistance formula:
Rtotal1=201+151+121+201
Take the LCM of 20, 15 and 12, which is 60:
Rtotal1=603+604+605+603=6015=41
Thus,
Rtotal=4 Ω
Check using the total current. In parallel, the currents in the branches add up:
I=3+4+5+3=15 A,Rtotal=IV=1560=4 Ω
Conclusion:
The total resistance of the circuit is 4 Ω.