Concept used — rolling a sheet into a cylinder
When a rectangular sheet is rolled so that two opposite edges meet, the joined edges become the height of the cylinder and the other side wraps round to form the circumference of the base. With an overlap of 1 cm, the circumference is 1 cm less than that side, and a strip 1 cm wide along the joined edge is hidden.
CSA=2πrh=(circumference)×h,V=πr2h
Given: each sheet is 45 cm × 155 cm; overlap 1 cm; π=722.
(i) Difference in the curved surface areas
Step 1 — Sheet 1. Its 155 cm edges are joined, so the height is h1=155 cm and the 45 cm side wraps round: circumference =45−1=44 cm.
CSA1=44×155=6820 cm2
Step 2 — Sheet 2. Its 45 cm edges are joined, so the height is h2=45 cm and the 155 cm side wraps round: circumference =155−1=154 cm.
CSA2=154×45=6930 cm2
Step 3 — Difference.
6930−6820=110 cm2
The sheets are identical, so this is just the difference between the hidden overlap strips: 155×1−45×1=110 cm².
Answer (i): the curved surface areas differ by 110 cm² (the Sheet 2 cylinder has the larger CSA).
(ii) Ratio of the volumes
Step 1 — Radii from the circumferences.
2πr1=44⇒r1=2×2244×7=7 cm
2πr2=154⇒r2=2×22154×7=249=24.5 cm
Step 2 — Ratio of the volumes.
V2V1=πr22h2πr12h1=249×249×457×7×155
V2V1=49×49×4549×155×4=2205620=441124
Answer (ii): V1:V2=124:441.