Opening your dashboard
Class 10 Maths Chapter 12 Surface Areas and Volumes: Previous Year Questions
46 questions on Chapter 12, each solved step by step. Class 10 Maths, CBSE 2026-27.
46 questions with solutions
1–5 marks · Mixed difficulty
The first 29 solutions are on this page. This chapter is a long one, so the rest open on their own page to keep this one quick to load.
- 11 mark
Question 1
The volume of a right circular cone whose area of the base is and the vertical height is 8 cm , is:
Solve with AIAnswer
(A)
(B)
(C)
- Correct
(D)
Option (D) is correct.
Concept used — volume of a cone
Here is the area of the circular base, so the volume of a cone is one-third of (base area × height). The question gives the base area directly, so there is no need to find .
Given: base area cm², vertical height cm.
Step 1 — Replace by the base area.
Step 2 — Simplify.
Answer: the volume is cm³, option (D).
Why the others fail: (B) forgets the ; (C) uses instead of ; (A) is , which comes from no volume formula.
- 21 mark
Question 2
A cuboid of base area sq units is filled with water upto a height of units. A sphere of volume cu units is dropped into the cuboid such that it is completely submerged. A representation of the submerged sphere is shown below. Which of these represents the increase in the height of water?
Solve with AIAnswer
(A) 0 units
- Correct
(B) units
(C) units
(D) unit
Option (B) is correct.
Concept used — displacement of water
When a solid is completely submerged, the water rises by a layer whose volume equals the volume of the solid. In a cuboid that layer is itself a cuboid on the same base, so
Given: base area of the cuboid sq units, volume of the sphere cu units. The starting height does not affect the rise.
Step 1 — Let the rise be . The extra layer of water is a cuboid of base area and height , so its volume is .
Step 2 — Equate it to the volume of the sphere.
Answer: the water rises by units, option (B).
Why the others fail: (A) ignores the displaced water; (C) is a volume, not a height; (D) is the new height of the water, not the increase.
- 31 mark
Question 3
Two cubes each with 6 cm edge are joined end to end. The surface area of the resulting cuboid is
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Concept used — total surface area of a cuboid
When two cubes are joined end to end, the two touching faces are hidden and the solid becomes a single cuboid, so we use the cuboid formula with the new dimensions.
Step 1 — Dimensions of the cuboid. Placing the cm cubes end to end doubles the length only:
Step 2 — Substitute.
Answer: cm², option (B).
Check: two separate cubes have cm²; joining hides two faces of cm² each, and cm². Option (A) forgets the factor .
- 41 mark
Question 4
A sphere of maximum volume is cut out from a solid hemisphere of radius 7 cm . Then the ratio of the volume of the original hemisphere to that of the cutout sphere is
Solve with AIAnswer
(A)
(B)
(C)
- Correct
(D)
Option (D) is correct.
Concept used — volumes of a hemisphere and a sphere
The largest sphere that fits inside a hemisphere sits on the flat base and touches the top of the dome, so its diameter equals the radius of the hemisphere: .
Given: radius of the hemisphere cm.
Step 1 — Radius of the sphere.
Step 2 — Write both volumes in terms of .
Step 3 — Take the ratio.
Answer: the ratio is , option (D).

The largest sphere touches the base and the top of the dome, so its diameter equals r.
Note: the value cm is not actually needed; the ratio is for every hemisphere.
- 51 mark
Question 5
Savita has a lamp placed at the centre of her square yard, each side measuring 20 m . The light of lamp covers a circle of radius 10 m on yard. What area of the yard is NOT lit by the lamp?
Solve with AIAnswer
(A)
(B)
(C) sq. m
- Correct
(D)
Option (D) is correct.
Concept used — area of a square and of a circle
The lit part is a circle of radius m centred in the yard. The side is m, so the circle just touches the four sides and lies completely inside the yard. The unlit area is the square minus the circle.
Step 1 — Area of the yard.
Step 2 — Area lit by the lamp.
Step 3 — Area not lit.
Answer: sq. m, option (D).
Why the others fail: (B) is the lit area, not the unlit area; (A) is not an area in this figure; (C) subtracts the side and radius instead of their squares.
- 61 mark
Question 6
A vessel having of water is emptied through two openings, one small and the other large. Water flows out through the smaller opening at the rate of U and through the larger one at the rate of . Given that and that the vessel gets fully emptied in 1 hour, what is ?
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Concept used — volume = rate × time, and a pair of linear equations
The volume of water that leaves through an opening is (rate of flow) × (time). Both openings together remove the whole m³ in hour, which gives one equation; the condition gives the second.
Step 1 — Volume removed in 1 hour. Small opening: m³. Large opening: m³. Together they empty the m³:
Step 2 — Eliminate . Multiply (i) by :
Subtract (ii) from (iii):
Step 3 — Check. From (i), , and , as required.
Answer: m³/h, option (B).
- 71 mark
Question 7
The radius of a sphere (in cm) whose volume is , is
Solve with AIAnswer
(A) 3
(B)
- Correct
(C)
(D)
Option (C) is correct.
The volume of a sphere of radius is
We are told cm, so
Dividing both sides by ,
Taking the cube root,
Watch the exponent: gives , not . You would only get if were 3.
- 81 mark
Question 8
A cylindrical pencil sharpened at one edge is the combination of:
Solve with AIAnswer
- Correct
(A) a cone and a cylinder
(B) frustum of a cone and a cylinder
(C) a hemisphere and a cylinder
(D) two cylinders
Option (A) is correct — a cone and a cylinder.
Picture the pencilTake an ordinary pencil and look at it in two parts.
-
The long unsharpened body has the same circular cross-section all the way along and two flat ends. That is a cylinder.
-
The sharpened tip starts at the full width of the pencil and narrows steadily to a point. A shape that has a circular base and tapers to a single point is a cone.
So a sharpened pencil is a cone sitting on top of a cylinder.
Why the other options are wrong-
(B) frustum of a cone and a cylinder — a frustum is a cone with its tip cut off, leaving a flat circular face at the narrow end. A sharpened pencil comes to a genuine point, not a flat top. (A pencil that has been sharpened and then had the point snapped off would indeed be a frustum on a cylinder.)
-
(C) a hemisphere and a cylinder — a hemisphere is rounded like a dome. The sharpened end of a pencil is straight-sided and pointed, not curved.
-
(D) two cylinders — a cylinder has the same width all the way along, so no cylinder can taper to a point.
- 91 mark
Question 9
A plumbline (Sahul) is the combination of:
Solve with AIAnswer
(A) a cone and a cylinder
- Correct
(B) a hemisphere and a cone
(C) frustum of a cone and a cylinder
(D) sphere and cylinder
Option (B) is correct.
Concept used — recognising the solids in a combination
A plumb line (sahul) is a heavy bob hung on a thread, used by masons to check that a wall is vertical. The bob has a rounded top and comes to a sharp point at the bottom, so that it hangs exactly over a mark.
Step 1 — Top part. The rounded top is half of a sphere: a hemisphere.
Step 2 — Bottom part. The lower part narrows from a circular face down to a point: a cone, whose base is joined to the flat face of the hemisphere.
Answer: a hemisphere and a cone, option (B).
Why the others fail: (A) a cone and a cylinder has no rounded end; (C) a frustum ends in a flat face, not a point; (D) a sphere and a cylinder never come to a point.
- 101 mark
Question 10
The shape of a gilli, in the gilli-danda game (see in figure) is a combination of:
Solve with AIAnswer
(A) two cylinders
(B) a cone and a cylinder
- Correct
(C) two cones and a cylinder
(D) two cylinders and a cone
Ans. Option (C) is correct.
Explanation: A gilli is a short cylinder of wood whose two ends are sharpened to points. Each pointed end tapers from the full circular width of the cylinder down to a tip, which is the shape of a cone.
So a gilli is two cones and a cylinder — a cone fixed to each end of the cylinder.
Why the others are wrong: (A) two cylinders cannot taper to a point; (B) has only one pointed end, but a gilli is sharpened at both; (D) has only one cone.
- 111 mark
Question 11
The sum of the length, breadth and height of a cuboid is and the length of its diagonal is . The total surface area of the cuboid is:
Solve with AIAnswer
(A)
(B)
- Correct
(C)
(D)
Ans. Option (C) is correct.
Explanation: Let the length, breadth and height be , and .
Step 1 — the two given facts.
The diagonal of a cuboid is , so
Step 2 — square (i).
Step 3 — read off the surface area.
Note on the data: for any real cuboid, . Here that would need , so no actual cuboid has both of these measurements. The algebra above is the method the examiners intended, and cm² is the official answer.
- 121 mark
Question 12
A hollow cube of internal edge 22 cm is filled with spherical marbles of diameter 0.5 cm and it is assumed that space of the cube remains unfilled. Then the number of marbles that the cube can accommodate is:
Solve with AIAnswer
- Correct
(A) 142296
(B) 142396
(C) 142496
(D) 142596
Option (A) is correct.
Concept used — volume of a cube and of a sphere
Only of the cube is occupied by marbles, so (number of marbles) × (volume of one marble) × (volume of the cube).
Given: edge cm; diameter of a marble cm, so cm. Take .
Step 1 — Space filled by the marbles.
Step 2 — Volume of one marble.
Step 3 — Number of marbles .
Answer: the cube can hold marbles, option (A).
- 131 mark
Question 13
A medicine-capsule is in the shape of a cylinder of diameter 0.5 cm with two hemispheres stuck to each to its ends. The length of entire capsule is 2 cm . The capacity of the capsule is :
Solve with AIAnswer
- Correct
(A)
(B)
(C)
(D)
Option (A) is correct.
Concept used — volume of a cylinder and of a sphere
The capsule is a cylinder with a hemisphere at each end. Both hemispheres have the cylinder's radius, so together they make one full sphere. Each hemisphere adds its radius to the length.
Step 1 — Radius.
Step 2 — Length of the cylindrical part. Total length :
Step 3 — Capacity = cylinder + two hemispheres (one sphere).
Step 4 — Substitute, with .
Answer: the capacity is about cm³, option (A).

Each hemispherical end adds r to the length, so the cylinder is h = 2 − 2r long.
- 141 mark
Question 14
Anishka melted 11 chocolate cubes in a cylindrical cup as shown.
(Note: The figures are not to scale.)
If the length of the side of each cube is and the radius of the cup is , which of these represents the height of the melted chocolate in the cup?
(Note: Take )Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Concept used — volume does not change on melting
Melting changes the shape of the chocolate but not its amount, so
where is the height of the melted chocolate in the cylindrical cup.
Step 1 — Volume of the cubes. Each cube has volume cm³, so the cubes have cm³.
Step 2 — Equate and solve for , with .
Answer: cm, option (B).
Why the others fail: a height is (volume) ÷ (base area), so it must be divided by . Options (A) and (C) divide by , and (C) and (D) use (an area) instead of the cube's volume .
Note: melting one solid into another ("conversion of solids") is not in the 2026-27 NCERT chapter; this question is kept as a CBSE past-paper question.
- 151 mark
Question 15
For which of the following solids is the lateral/curved surface area and total surface area the same?
Solve with AIAnswer
(A) Cube
(B) Cuboid
(C) Hemisphere
- Correct
(D) Sphere
Option (D) is correct.
Concept used — curved (lateral) surface area and total surface area
The total surface area (TSA) is the curved or lateral surface area (CSA/LSA) plus the area of any flat faces (bases, or top and bottom). So the two are equal only for a solid that has no flat face at all.
Step 1 — Check each solid.
Cube: LSA but TSA (top and bottom added). Not equal.
Cuboid: LSA but TSA (top and bottom added). Not equal.
Hemisphere: CSA but TSA (the flat circular face added). Not equal.
Sphere: the whole surface is curved and there is no flat face, so CSA TSA .
Answer: the sphere, option (D).
- 161 mark
Question 16
Two cones have their heights in the ratio and radii in the ratio . What is the ratio of their volumes?
Solve with AIWritten solution
Concept used — volume of a cone
For two cones the factor cancels in the ratio, so the ratio of the volumes is .
Given: and .
Step 1 — Write the ratio of the volumes.
Step 2 — Substitute the given ratios.
Answer: the volumes are in the ratio .
Note: the radius is squared, so tripling the radius multiplies the volume by , while one-third of the height divides it by .
- 171 mark
Question 17
A cylindrical glass tube with radius 10 cm has water upto a height of 9 cm . A metal cube of 8 cm edge is immersed completely. By how much the water level will rise in the glass tube ?
Solve with AIWritten solution
Sol. Let the water level rise by cm.
The cube is completely immersed, so it pushes up a layer of water equal to its own volume. That layer is a cylinder of radius cm and height :
Equating the two:
The water level rises by about cm.
- 182 marks
Question 18
Shown below is a right circular cone of volume 13,600 . Find the angle which the slant height makes with the base radius. Show your work. (Note: Take as 3, as 1.4 and as 1.7)
Solve with AIWritten solution
Concept used — volume of a cone, and the tangent ratio in the right triangle inside it
The height , the base radius and the slant height form a right triangle, with the right angle at the centre of the base. The angle between the slant height and the base radius is at the rim; is opposite it and is adjacent to it, so
Given: cm³, base radius cm (from the figure), and .
Step 1 — Find the height.
Step 2 — Find .
Step 3 — Identify the angle. With taken as , , so
Answer: the slant height makes an angle of with the base radius.
- 192 marks
Question 19
From a solid right circular cylinder of height 14 cm and base radius 6 cm , a right circular cone of same height and same base removed. Find the volume of the remaining solid.
Solve with AIWritten solution
Concept used — volume of a cylinder and of a cone
The cone removed has the same base and the same height as the cylinder, so the remaining solid is the cylinder minus that cone.
Given: cm, cm. Take .
Step 1 — Remaining volume in terms of and .
Step 2 — Substitute.
Answer: the volume of the remaining solid is cm³.

The cone shares the cylinder's base and height; the shaded solid is what remains.
- 202 marks
Question 20
Isha is years old girl. On the result day, Isha and her father Suresh were very happy as she got first position in the class. While coming back to their home, Isha asked for a treat from her father as a reward for her success. They went to a juice shop and asked for two glasses of juice. As, a juice seller, was serving juice to her customers in two type of glasses. Both the glasses had inner radius 3 cm . The height of both the glasses was 10 cm . First type: A Glass with hemispherical raised bottom.

Second type: A glass with conical raised bottom of height 1.5 cm . Isha insisted to have the juice in first type of glass and her father decided to have the juice in second type of glass. Out of the two, Isha or her father Suresh, who got more quantity of juice to drink and by how much ?
Solve with AIWritten solution
Concept used — capacity of a glass with a raised bottom
A raised bottom pushes up into the glass and takes space away from the juice, so the juice held volume of the cylinder volume of the raised part.
Given: both glasses have inner radius cm and height cm; the conical bottom has height cm. Take .
Step 1 — Volume of the cylinder (the same for both glasses).

Step 2 — First glass (hemispherical raised bottom of radius cm).

Step 3 — Second glass (conical raised bottom of height cm).

Step 4 — Compare.
Answer: Suresh, who drank from the second glass, got more juice, by about cm³.
Note: the hemispherical bump ( cm³) takes up four times the space of the conical bump ( cm³), which is why the first glass holds less.
- 213 marks
Question 21
A right circular cylinder and a cone have equal bases and equal heights. If their curved surface areas are in the ratio , then find the ratio between the radius of their bases to their heights.
Solve with AIWritten solution
Sol. Let the common radius be and the common height . The slant height of the cone is .
Squaring both sides:
Hence the ratio of the radius to the height is .
- 223 marks
Question 22
A solid is in the form of a cylinder with hemispherical ends. The total height of the solid is 20 cm and the diameter of the cylinder is 7 cm . Find the total volume of the solid. ( Use )
Solve with AIWritten solution
Sol. Radius of the cylinder and of each hemisphere:
Each hemispherical end adds its radius to the height, so the cylindrical part is

The two hemispheres together make one sphere:
- 233 marks
Question 23
A cylindrical tank of radius 40 cm is filled upto height 3.15 m by an other cylindrical pipe with the rate of in hour. Calculate the diameter of cylindrical pipe ?
Solve with AIWritten solution
Concept used — volume of a cylinder, and water flowing through a pipe
Water flowing through a pipe at speed for time forms a cylinder of water with the pipe's cross-section and length . That volume equals the volume of water collected in the tank.
Given: tank radius cm m, water height m; speed of flow km/h m/h; time h. Let the radius of the pipe be m.
Step 1 — Volume of water in the tank.
Step 2 — Length of the column of water delivered in half an hour.
Step 3 — Volume delivered by the pipe.
Step 4 — Equate the two volumes.
Step 5 — Diameter of the pipe.
Answer: the diameter of the pipe is cm.
Note: cancels, so no value of is needed. Flow through pipes ("conversion of solids") is not in the 2026-27 NCERT chapter; this is kept as a CBSE past-paper question.
- 243 marks
Question 24
A heap of rice is in the form of a cone of base diameter 24 m and height 3.5 m . Find the volume of the rice. How much canvas cloth is required to just cover the heap?
Solve with AIWritten solution
Concept used — volume and curved surface area of a cone
The rice fills the cone, so its volume is the volume of the cone. The canvas covers only the sloping (curved) surface, because the base is on the ground, so the canvas needed is the CSA, which needs the slant height .
Given: base diameter m, so m; height m. Take .
Step 1 — Volume of the rice.
Step 2 — Slant height. By Pythagoras' theorem in the right triangle formed by , and :
Step 3 — Canvas required.
Answer: the volume of the rice is m³, and about m² of canvas is required.

The canvas covers the curved surface only, so the slant height l is needed.
- 251 mark
Question 25
A sphere of diameter 6 cm is dropped in a right circular cylindrical vessel partly filled with water. The diameter of the cylindrical vessel is 12 cm . If the sphere is completely submerged in water, by how much will the level of water rise in the cylindrical vessel?
Solve with AIWritten solution
Concept used — displacement of water
A completely submerged solid pushes the water up by a layer whose volume equals the volume of the solid. In a cylindrical vessel of radius that layer is a cylinder of height (the rise), so
Given: diameter of the sphere cm, so cm; diameter of the vessel cm, so cm.
Step 1 — Volume of the sphere.
Step 2 — Volume of the raised layer of water.
Step 3 — Equate and solve.
Answer: the water level rises by cm.

The raised layer of water (height h) has the same volume as the sphere.
- 262 marks
Question 26
A paint roller is a paint application tool used for painting large flat surfaces rapidly and efficiently. One such roller is shown below, which is 26 cm long with an outer diameter of 7 cm .
(Note: The figure is not to scale)
Find the maximum area of the surface that gets painted when the roller makes 6 complete rotations vertically. Show your work.
(Note: Take )Solve with AIWritten solution
Sol. Length of roller cm, radius cm.
In one complete rotation the roller paints a strip equal to its curved surface area:
In complete rotations:
- 272 marks
Question 27
Dinesh is building a greenhouse in his farm as shown below. The base of the greenhouse is circular having a diameter of 12 m and it has a hemispherical dome on top.
(Note: The image is not to scale)
How much will it cost him to cover the walls and top of the greenhouse with transparent plastic, if the plastic sheet costs ₹ 77 per sq m ? Show your steps.
(Note: Take )Solve with AIWritten solution
Concept used — curved surface areas of a cylinder and a hemisphere
The greenhouse is a cylinder (the walls) with a hemispherical dome on top, both of radius . The plastic covers the walls and the dome; the floor and the circle where the dome sits on the walls are not covered, so we add only the two curved surface areas.
Given: diameter m, so m; height of the walls m (from the figure); plastic costs ₹ 77 per m². Take .
Step 1 — Area of the walls.
Step 2 — Area of the dome.
Step 3 — Total area to be covered.
Step 4 — Cost.
Answer: it will cost him ₹ 23232.
- 283 marks
Question 28
Shown below is a cake that Subodh is baking for his brother's birthday. The cake is 21 cm tall and has a radius of 15 cm . He wants to surprise his brother by filling gems inside the cake. In order to do that, he removes a cylindrical portion of cake out of the centre as shown. The piece that is removed is 21 cm tall.

If the cake weighs 0.5 g per cubic cm and the weight of the cake that is left after removing the central portion is 6600 g , find the radius of the central portion that is cut. Show your steps. (Note: Take )
Solve with AIWritten solution
Sol. Step 1 — volume and weight of the whole cake.
Step 2 — weight and volume of the piece removed.
Step 3 — radius of the central portion. The removed piece is a cylinder cm tall:
Thus, the radius of the central portion is cm.
- 293 marks
Question 29
A semi-circular waffle sheet of radius 5 cm is folded into an ice-cream cone as shown below.
(Note: The figures are not to scale)
Due to overlap while folding, the radius of the base of the cone is of what it would be without overlap.
Find the approximate volume of the cone. Show your work.
(Note: Take )Solve with AIWritten solution
Sol. Step 1 — what the sheet becomes. When the semicircle (radius cm) is folded into a cone:
- its radius becomes the slant height of the cone, cm;
- its curved edge becomes the circumference of the base of the cone.
Step 2 — radius of the base without overlap.
Step 3 — radius with the overlap.
Step 4 — vertical height. The slant height is still cm, so
Step 5 — volume.
Common slip: using cm (the slant height) as the vertical height gives cm³. The radius of the sheet is the slant height of the cone, so the vertical height must come from Pythagoras.
- 305 marks
Question 30
A student was asked to make a model shaped like a cylinder with two cones attached to its ends by using a thin aluminium sheet. The diameter of the model is 3 cm and its total length is 12 cm . If each cone has a height of 2 cm , find the volume of air contained in the model.
- 315 marks
Question 31
A solid is in the shape of a right-circular cone surmounted on a hemisphere, the radius of each of them being 7 cm and the height of the cone is equal to its diameter. Find the volume of the solid.
- 325 marks
Question 32
Shown below is a cuboid with water in two different orientations. The length, breadth and height of the cuboid are distinct. The cuboid has of water.
(Note: The figures are not to scale.)If the height of water in orientation II is half of that in orientation I, then find the heights of water in both orientations. Show your work.
- 335 marks
Question 33
Two rectangular sheets of dimensions are folded to make hollow right circular cylindrical pipes, such that there is exactly 1 cm of overlap when sticking the ends of the sheet. Sheet 1 is folded along its length, while Sheet 2 is folded along its width. That is, the top edge of the sheet is joined with its bottom edge in both the sheets, as depicted by the arrow in the figure below. Both pipes are closed on both ends to form cylinders.
(Note: The figures are not to scale)
(i) Find the difference in the curved surface areas of the two cylinders.
(ii) Find the ratio of the volumes of the two cylinders formed.Show your work. (Note: Use as . Assume that the sheets have negligible thickness.)
- 345 marks
Question 34
Shown below is a cylindrical can placed in a cubical container.

(i) How many of these cans can be packed in the container such that no more cans are fitted?
(ii) If the capacity of one can is 539 ml , find the internal volume of the cubical container. Show your work.
(Note: Take as )
- 355 marks
Question 35
Read the following text and answer any four questions from Q1 to Q5.
The Great Stupa at Sanchi is one of the oldest stone structures in India, and an important monument of Indian Architecture.
It was originally commissioned by the emperor Ashoka in the century BCE. Its nucleus was a simple hemispherical brick structure built over the relics of the Buddha. It is a perfect example of combination of solid figures. A big hemispherical dome with a cuboidal structure mounted on it. (Take )
-
Calculate the volume of the hemispherical dome if the height of the dome is 21 m .
(A)
(B)
(C)
(D) -
The formula to find the volume of sphere is:
(A)
(B)
(C)
(D) -
The cloth required to cover the hemispherical dome if the radius of its base is is:
(A) 1222 sq.m
(B)
(C)
(D) -
The total surface area of the combined figure i.e., hemispherical dome with radius 14 m and cuboidal shaped top with dimensions is:
(A) 1200 sq. m
(B) 1232 sq. m
(C)
(D) 1932 sq. m -
The volume of the cuboidal shaped top with dimensions mentioned in question 4 is:
(A)
(B)
(C)
(D)
-
- 365 marks
Question 36
Read the following text and answer the following questions: An open water tank walls are of thickness 10 cm .

-
What is the outer surface area of its wall?
-
The thickness of the lid is 3 cm .What is the total surface area (in ) of the lid?
-
The lid is made of cement.What is the volume of the cement used?
-
- 373 marks
Question 37
In figure, a tent is in the shape of a cylinder surmounted by a conical top of same diameter. If the height and diameter of cylindrical part are 2.1 m and 3 m respectively and the slant height of conical part is 2.8 m, find the cost of canvas needed to make the tent if the canvas is available at the rate of Rs. 500/sq. metre. (Use )

- 383 marks
Question 38
A conical vessel, with base radius 5 cm and height 24 cm, is full of water. This water is emptied into a cylindrical vessel of base radius 10 cm. Find the height to which the water will rise in the cylindrical vessel. (Use )
- 393 marks
Question 39
A sphere of diameter 12 cm, is dropped in a right circular cylindrical vessel, partly filled with water. If the sphere is completely submerged in water, the water level in the cylindrical vessel rises by cm. Find the diameter of the cylindrical vessel.
- 404 marks
Question 40
Due to heavy floods in a state, thousands were rendered homeless. 50 schools collectively offered to provide place and the canvas for 1500 tents to be fixed by the governments and decided to share the whole expenditure equally. The lower part of each tent is cylindrical of base radius 2.8 m and height 3.5 m, with conical upper part of same base radius but height 2.1 m. If the canvas used to make the tents costs Rs. 120 per sq. m, find the amount shared by each school to set up the tents. What value is generated by the above problem? (Use )
- 411 mark
Question 41
A hemispherical bowl is made of steel of thickness 1 cm. The outer radius of the bowl is 6 cm. The volume of steel used (in ) is:
- 421 mark
Question 42
Assertion (A): Surface area of cuboid formed by joining two cubes of side 4 cm end-to-end is .
Reason (R): The surface area of a cuboid of dimensions is .
- 434 marks
Question 43
On a Sunday your parents took you to a fair. You could see lot of toys displayed and you wanted them to buy a Rubik's cube and a strawberry ice-cream for you.
Based on the information given above, answer the following questions:
(i) Find the length of the diagonal of Rubik's cube if each edge measures 6 cm.
(ii) Find the volume of Rubik's cube if the length of the edge is 7 cm.
(iii) (a) What is the curved surface area of the hemisphere (ice-cream) if the base radius is 7 cm?
OR
(iii) (b) If two cubes of edges 4 cm are joined end-to-end, then find the surface area of the resulting cuboid.
- 444 marks
Question 44
A skilled carpenter decided to craft a special rolling pin for the local baker. He carefully joined three cylindrical pieces of wood — two small ones on the ends and one larger in the centre to create a perfect tool.

The length of the bigger cylindrical part is 12 cm and diameter is 7 cm and the length of each smaller cylindrical part is 5 cm and diameter is 2.1 cm.
Based on the above information, answer the following questions:
(i) Find the volume of the bigger cylindrical part.
(ii) Find the curved surface area of the bigger cylindrical part.
(iii) (a) Find the ratio of the volume of the bigger cylindrical part to the total volume of the two smaller (identical) cylindrical parts.
OR
(iii) (b) Find the sum of the curved surface areas of the two identical smaller cylindrical parts.
- 451 mark
Question 45
A cone and a cylinder have same height and same radius. The volume of the cone and the volume of the cylinder are in the ratio:
- 465 marks
Question 46
A necklace is made up of wooden beads. Each bead is in the form of a sphere of diameter 4.2 mm. A cylinder is hollowed out from each bead. If the radius of the cylinder is 1 mm, find the volume of wood left in each bead.
