During electrolytic refining of copper, the anode, the cathode and the electrolyte used respectively are:
Previous Year Questions · Question 32 of 37
During electrolytic refining of copper, the anode, the cathode and the electrolyte used respectively are:
- Correct answer
(A) Impure copper, pure copper, acidified copper sulphate solution
(B) Pure copper, impure copper, sulphuric acid
(C) Pure copper, impure copper, acidified copper sulphate solution
(D) Impure copper, pure copper, distilled water
Option (A) is correct.
Explanation: In electrolytic refining the impure metal is made the anode and a thin strip of pure metal is made the cathode; a solution of a salt of the same metal is the electrolyte. For copper the electrolyte is acidified copper sulphate solution. On passing current, copper from the impure anode dissolves into the electrolyte and an equivalent amount of pure copper is deposited on the cathode. Soluble impurities go into solution and insoluble impurities settle at the bottom of the anode as anode mud.
Option (B) is wrong: it swaps the electrodes, and dilute sulphuric acid alone supplies no copper ions to deposit on the cathode.
Option (C) is wrong: the electrolyte is right, but the electrodes are swapped; the impure copper must be the anode so that it dissolves.
Option (D) is wrong: the electrodes are right, but distilled water is a very poor conductor and contains no copper ions, so no copper could be deposited.

Electrolytic refining: the impure metal dissolves at the anode and rebuilds itself, pure, at the cathode.
