Mr Ramesh runs a small torch repair kiosk in Madurai. A customer brings a two-cell torch that does not glow when its switch is slid ON. The cells are placed correctly, cap to disc. Mr Ramesh checks the torch one part at a time and writes down what he finds. When the switch is slid ON, its metal strip is meant to press against a metal contact inside the torch.

| Step | What he checked | Result |
|---|---|---|
| 1 | The torch's two cells, joined in his tester with a lamp he knows is good | The lamp glows |
| 2 | The torch's own lamp, joined to a cell he knows is good | The lamp glows |
| 3 | The torch's switch, slid to ON | Its metal strip is bent and does not reach the metal contact |
(i) In step 1, why did Mr Ramesh use a lamp that he knew was good? (1 mark)
(ii) Which part of the torch is faulty? Use the table to explain how you know. (1 mark)
(iii) Explain why the bent strip stops the torch from glowing even when the switch is ON, and what bending the strip back will do. (2 marks)
