An ideal diode and a capacitor are connected in series to an ac source of peak voltage 10 V. There is no load across the capacitor. After the first few cycles, the voltage across the capacitor is
Practice Questions · Question 20 of 30
An ideal diode and a capacitor are connected in series to an ac source of peak voltage 10 V.
Question 201 markMCQMedium
Select your answer
- Correct answer
(A) a steady 10 V
(B) a steady 7.07 V
(C) a steady 20 V
(D) varying between 0 and 10 V in step with the input
Option (A) is correct.
Explanation: During the first positive half-cycle the diode conducts and the capacitor charges up to the peak voltage, 10 V. After the peak the input falls below the capacitor voltage, so the diode becomes reverse biased and stops conducting. With no load connected there is no path through which the capacitor can discharge, so it simply stays charged at the peak voltage: the output is a steady 10 V.
Option (B) is the rms value of the input, (C) doubles the peak, and (D) would be the output of a half-wave rectifier with a resistive load and no capacitor.
