Concept used — Kirchhoff's loop rule with a diode in the loop
Going once round a closed loop, the sum of the potential drops equals the emf of the battery (Kirchhoff's loop rule). In this series circuit the same current I flows through the battery, the diode and the resistor, so
E=VD+IR⇒I=RE−VD
where E is the battery emf, VD the voltage across the diode and R the series resistance. A forward-biased silicon diode takes about VD=0.7 V; an ideal diode takes VD=0; a reverse-biased diode lets only a negligible current (µA) pass.
Given: E=9 V, R=2.2 kΩ=2200 Ω, forward drop VD=0.7 V. In the figure the p-side of D (the base of the triangle, away from the bar) is connected to the positive terminal (long plate) of the battery, so D is forward biased.
(a) Current with a silicon diode (VD=0.7 V)
Step 1 — Voltage left for the resistor.
VR=E−VD=9−0.7=8.3 V
Step 2 — Ohm's law for the resistor.
I=RVR=22008.3=3.77×10−3 A
Answer: I≈3.77 mA.
(b) Diode connected the other way round
Step 1 — Bias. The p-side is now joined to the negative terminal, so the diode is reverse biased. Its barrier is raised and only a tiny reverse current (of the order of µA) flows, so I≈0.
Step 2 — Where the 9 V appears. By the loop rule 9=VD+IR. With I≈0, the drop across the resistor is IR≈0, so
VD=9−IR≈9 V
Answer: I≈0 (only a µA reverse current); practically the whole 9 V appears across the diode, none across the resistor.
(c) Ideal diode and the percentage error
Step 1 — Current with an ideal diode (VD=0):
Iideal=RE=22009=4.09×10−3 A=4.09 mA
Step 2 — Percentage error relative to the value in (a):
error=IIideal−I×100=3.7734.091−3.773×100≈8.4 %
Answer: Iideal≈4.09 mA, an error of about 8.4 %.
Note: the error equals E−VDVD=8.30.7, so the larger the supply voltage, the less the 0.7 V drop matters.
(d) Power supplied and how it is shared (using I=3.77 mA from (a))
Step 1 — Power supplied by the battery, P=EI:
P=9×3.77×10−3=33.9×10−3 W=33.9 mW
Step 2 — Power in the resistor, PR=VRI:
PR=8.3×3.77×10−3=31.3 mW
Step 3 — Power in the diode, PD=VDI:
PD=0.7×3.77×10−3=2.64 mW
Step 4 — Check (energy conservation).
PR+PD=31.3+2.64=33.9 mW=P
Answer: the battery supplies about 33.9 mW: about 31.3 mW is dissipated in the resistor and 2.64 mW in the diode.