Opening your dashboard
Class 12 Chemistry Chapter 4 D and F Block Elements: Practice Questions
30 questions on Chapter 4, each worked through on its own page with the AI tutor. Class 12 Chemistry, CBSE 2026-27.
30 questions
1–5 marks · Mixed difficulty
- 11 mark
Question 1
A researcher compares the highest oxidation state shown in compounds by four elements of the first transition series: titanium, chromium, manganese and iron.
Which element shows the highest oxidation state?
- 21 mark
Question 2
Copper () and potassium () both have a single electron in the orbital. Yet copper is a hard metal that melts at 1358 K, while potassium is soft enough to cut with a knife and melts at only 336 K.
Which statement best explains the difference?
- 31 mark
Question 3
Cerium is the one lanthanoid that forms a stable hydroxide in the state as well as the usual state. A student compares the basic character of and .
Which statement is correct?
- 41 mark
Question 4
Assertion (A): From chromium () to copper () the nuclear charge rises by five units, yet the metallic radii stay nearly constant (Cr 129, Mn 137, Fe 126, Co 125, Ni 125, Cu 128 pm).
Reason (R): Each added electron enters the inner subshell, and these electrons shield the outer electrons from most of the extra nuclear charge.
- 51 mark
Question 5
Assertion (A): Neighbouring lanthanoids, such as praseodymium and neodymium, occur together in minerals and are very difficult to separate from one another by chemical methods.
Reason (R): All the lanthanoids are silvery-white, soft metals that tarnish rapidly in air.
- 62 marks
Question 6
Zinc, cadmium and mercury are placed in the -block but are not regarded as transition elements, whereas copper is regarded as a transition element. Explain why.
- 73 marks
Question 7
A metal ion has the outer electronic configuration .
(a) Calculate its spin-only magnetic moment. Also calculate the spin-only magnetic moments for the and configurations.
(b) Identify a common transition metal ion that has the configuration and state its oxidation state.
- 82 marks
Question 8
A technician has two unlabelled bottles. One contains manganese(II) sulphate solution and the other zinc sulphate solution, both dilute and both of the same concentration (atomic numbers: Mn = 25, Zn = 30).
Explain how the two solutions could be told apart (a) by a magnetic measurement and (b) by their colour.
- 93 marks
Question 9
A student is given compounds containing the ions , , and (atomic numbers: Ti = 22, V = 23, Cu = 29, Zn = 30).
(a) Classify each ion as coloured or colourless.
(b) State which of these ions are paramagnetic.
(c) Anhydrous cobalt(II) chloride is blue, but it turns pink when water is added, which is why paper soaked in it is used to test for water. Explain the colour change.
- 102 marks
Question 10
Arrange the following lanthanoid ions in decreasing order of ionic radius, and give the reason for the order:
- 115 marks
Question 11
Potassium permanganate is widely used as an oxidising agent in laboratories and in water treatment. Answer the following:
(a) State the oxidation number of manganese in .
(b) Write the reduction half-reaction of permanganate ions in an acidic medium.
(c) Write the reduction half-reaction of permanganate ions in a neutral or weakly alkaline medium.
(d) Write the balanced ionic equation for the reaction between and in an acidic medium.
(e) A laboratory keeps its potassium permanganate solution in a dark brown bottle and standardises it shortly before each set of titrations. Explain both practices.
- 125 marks
Question 12
A sample of industrial waste water containing chromium(VI) is tested in the laboratory. At pH 9 the sample is yellow. When it is acidified to pH 3 it turns orange, and when alkali is added again the yellow colour returns.
(a) Name the chromium species responsible for the yellow colour and for the orange colour.
(b) Write the balanced ionic equation for the change that takes place on acidifying.
(c) Write the balanced ionic equation for the change that takes place on adding alkali.
(d) Another treatment plant reduces the chromium(VI) by bubbling sulphur dioxide through the acidified waste, which forms sulphate ions. Write the balanced ionic equation, and give the change in oxidation state of sulphur and of chromium.
(e) Before discharge, the chromium(VI) is reduced to chromium(III) by adding iron(II) sulphate in acid. Write the balanced ionic equation for this reaction.
- 134 marks
Question 13
Read the passage and answer the questions that follow.
A research laboratory studies the first transition series, from scandium to zinc. Most of these elements show variable oxidation states, form coloured ions and are paramagnetic. The energies of the and orbitals are close, so electrons from both can take part in bonding. When these atoms form ions, the electrons are lost before the electrons. The colour of the ions comes from the excitation of an electron from a lower-energy orbital to a higher-energy orbital, and their magnetic behaviour depends on the number of unpaired electrons.

(i) Which ion has the same number of unpaired electrons as ? [1]
(A) (B) (C) (D)
(ii) The number of oxidation states shown by these elements rises from Sc to Mn and then falls towards Zn. Which statement best explains this? [1]
(A) The atomic radius increases steadily from Sc to Zn. (B) The electrons are lost only after all the electrons. (C) Zinc has the largest number of unpaired electrons. (D) Up to Mn each added electron is unpaired and available for bonding; after Mn the electrons pair up, so fewer are available.
(iii) What is the electronic configuration of ? [1]
(A) (B) (C) (D)
(iv) A freshly made pale-green solution of iron(II) sulphate slowly turns yellow when it is left open to the air. Use your answer to (iii) to explain why. [1]
- 141 mark
Question 14
The bar chart shows the densities of the first-row transition metals (NCERT Table 4.2).

Which statement correctly explains the pattern?
- 151 mark
Question 15
A student writes four statements about the -block elements. Which one is correct?
- 161 mark
Question 16
A chemist working with actinoid metals in a well-shielded laboratory records four statements about their behaviour. Which statement is correct?
- 171 mark
Question 17
Match each substance in Column I with its use in Column II.
Column I (substance) Column II (use) (P) Titanium oxide (1) catalyst for the oxidation of ethyne to ethanal (Wacker process) (Q) (2) dry battery cells (R) (3) pigment industry (S) (4) photographic industry Choose the correct option.
- 181 mark
Question 18
The general outer electronic configuration of the -block elements is . Palladium () is the exception: its ground-state configuration is . Palladium commonly forms compounds in the state, such as .
Which statement about palladium is correct?
- 191 mark
Question 19
Assertion (A): The lanthanoid contraction is regarded as more important than the actinoid contraction in its effect on the properties of the elements that follow each series.
Reason (R): The chemistry of the elements that come after the actinoids is much less known at present.
- 201 mark
Question 20
Assertion (A): In practice, titanium and vanadium are passive towards dilute non-oxidising acids at room temperature.
Reason (R): The standard electrode potentials and are positive, so ions cannot oxidise these metals.
- 212 marks
Question 21
Complete and balance the following ionic equations.
(a) In neutral or faintly alkaline solution: [1]
(b) In acidic solution: [1]
- 222 marks
Question 22
Sodium dichromate and potassium dichromate contain the same oxidising ion, . Yet sodium dichromate is used extensively as an oxidising agent in organic chemistry, while potassium dichromate is the one used as a primary standard in volumetric analysis.
(a) Which property of sodium dichromate makes it the more convenient oxidant in organic chemistry? [1]
(b) Why is potassium dichromate, and not sodium dichromate, suitable as a primary standard? [1]
- 232 marks
Question 23
NCERT notes that the third ionisation enthalpies of lanthanum, gadolinium and lutetium are abnormally low compared with those of the neighbouring lanthanoids.
(a) Using the configurations of the and ions of these three elements (Table 4.9), explain why. [1]
(b) Which of europium and gadolinium would you expect to have the higher third ionisation enthalpy? Give a reason. [1]
- 242 marks
Question 24
NCERT gives these as examples of complex species formed by transition metal ions:
(Atomic numbers: Fe = 26, Cu = 29, Pt = 78; Pt is .)
(a) Find the oxidation state of the metal and the number of electrons it has in each species. [1]
(b) State the three reasons given in NCERT for transition metals forming a large number of complex compounds. [1]
- 253 marks
Question 25
The lanthanoids are reactive metals whose usual oxidation state in compounds is . Taking Ln as the symbol of a lanthanoid metal, write a balanced equation for each reaction below.
(a) The metal is heated with nitrogen. [1]
(b) The metal is heated with sulphur. [1]
(c) The metal is added to dilute hydrochloric acid (write the ionic equation). [1]
- 263 marks
Question 26
Acidified potassium dichromate oxidises iron(II) ions to iron(III) ions, and is itself reduced to chromium(III). (Atomic numbers: Cr = 24, Fe = 26.)
(a) Write the balanced ionic equation for the reaction. [1]
(b) Calculate the spin-only magnetic moment of the chromium species and of the iron species, before and after the reaction. [1]
(c) Count the total number of unpaired electrons carried by the metal species before and after the reaction, for the amounts in the balanced equation. Does the mixture become more or less paramagnetic? [1]
- 273 marks
Question 27
NCERT states that tetrahedral oxoanions are known for , , , and . (Atomic numbers: V = 23, Cr = 24, Mn = 25.)
(a) Write the formula, with its charge, of each of the five ions. [1]
(b) Give the number of electrons on the metal in each ion. [1]
(c) Which of these ions are paramagnetic? Calculate their spin-only magnetic moments. [1]
- 283 marks
Question 28
Compare the elements of the first transition series (Sc to Zn) with the lanthanoids (La to Lu) with respect to:
(a) the subshell in which the differentiating electrons are added, and how deeply it lies in the atom; [1]
(b) the range of oxidation states shown, with an example from each group; [1]
(c) the origin of the colour of their ions, naming one colourless ion from each group and the reason it is colourless. [1]
- 294 marks
Question 29
Read the passage and answer the questions that follow.
Water from some wells contains dissolved manganese(II) ions. They do no harm at low levels, but they leave brown-black stains on laundry and pipes. A small treatment plant removes them with potassium permanganate. The water, at about pH 7, flows into a reaction tank where a carefully measured amount of solution is added, together with a little zinc oxide. Permanganate oxidises the manganese(II) ions to insoluble manganese dioxide, which is then held back by a sand filter:

(Molar masses in : Mn = 54.9, = 158.0)
(i) In this reaction the oxidation state of manganese changes
(A) from to , and from to (B) from to , and from to (C) from to , and from to (D) from to , and from to [1]
(ii) The well water contains of per litre. Calculate the mass of needed to treat of this water. [1]
(iii) Why must the dose of permanganate not be more than this, and why does the pH of the water fall slightly as it passes through the tank? [1]
(iv) Explain why this step is carried out in neutral water and not after acidifying the water with dilute sulphuric acid. [1]
- 305 marks
Question 30
Some halides of the first-row transition metals (NCERT Table 4.5; X stands for a halogen) are:
Oxidation state Halides known , (X = F, Cl, Br, I), is the only halide of cobalt(III) (a) State the highest oxidation state that titanium, vanadium and chromium reach in their halides. How does each compare with the group number of the metal? [1]
(b) Vanadium(V) and chromium(VI) are reached only in the fluorides and , which are covalent molecules. Give the reason. [1]
(c) Cobalt(III) is found in but in no other simple halide. Which factor makes the fluoride stable here? [1]
(d) The other halides of vanadium(V) undergo hydrolysis to give oxohalides, . Find the oxidation state of vanadium in , and say whether this hydrolysis is a redox change. [1]
(e) Manganese(VII) is not found in any simple halide, but the compound is known. Find the oxidation state of manganese in and explain what this shows about oxygen. [1]
