A crane is to lift loads of up to 5.0 tonnes with a steel rope.
Question 212 marksHard
A crane is to lift loads of up to 5.0 tonnes with a steel rope. The yield strength of the steel is 2.5×108N m−2, and the designer wants a safety factor of 4 on the load (take g=9.8m s−2).
(a) Find the minimum area of cross-section and the corresponding radius of the rope.
(b) Why is such a rope made of many thin wires braided together rather than a single thick wire?
(a) Weight of the largest load:
W=mg=5.0×103kg×9.8m s−2=4.9×104N
With a safety factor of 4, the rope must stay within its elastic limit under a load of 4W=1.96×105N. So the stress 4W/A must not exceed σy:
A≥σy4W=2.5×108N m−21.96×105N=7.84×10−4m2
For a rope of circular cross-section, A=πr2:
r=πA=3.1427.84×10−4m=1.58×10−2m
Minimum area =7.84×10−4m2; minimum radius ≈1.6cm.
(b) A single steel wire about 3 cm thick would be practically a rigid rod; it could not be wound on a drum or passed over pulleys. A rope made of many thin wires braided together has the same total area, and so the same strength, but it is flexible and easier to manufacture.