(a) Tension along the wire. Let μ be the mass per unit length of the wire, L its length and M the hanging mass. Measure x upward from the lower end.

The tension at height x supports the load and the length x of wire below it:
T(x)=Mg+μgx
Extension of an element. An element of length dx carries tension T(x), so by Y=d(ΔL)/dxT/A it stretches by
d(ΔL)=YAT(x)dx
Total extension:
ΔL=YA1∫0L(Mg+μgx)dx=YA1(MgL+2μgL2)=YAgL(M+2m)
where m=μL is the mass of the wire. (The wire's own weight acts as if half of it hung at the end.)
Numbers. A=π(1.0×10−3)2=3.14×10−6 m2, m=ρAL=7860×3.14×10−6×10=0.247 kg.
YAgL=2.0×1011×3.14×10−610×10=1.59×10−4 m kg−1
- Due to the load: 1.59×10−4×25=3.98×10−3 m
- Due to the wire's own weight: 1.59×10−4×0.123=1.96×10−5 m
ΔL=3.98×10−3+0.02×10−3=4.0×10−3 m
Extension ≈4.0 mm.
(b) The tension is greatest at the top, x=L, where T=(M+m)g. The wire must not be stressed beyond its yield strength there:
Tmax=σyA=2.5×108×3.14×10−6 N=785 N
Mg=Tmax−mg=785−2.5=783 N
The maximum weight is about 783 N (a mass of about 78.3 kg). Because the wire's own weight (2.5 N) is so small, this is often quoted as ≈785 N, or about 78.5 kg, neglecting the mass of the wire.