Opening your dashboard
Class 8 Science Chapter 4: Electricity: Magnetic and Heating Effects Question Answers
Chapter 4 of the Class 8 Science book, filed here under Physics. 11 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 4, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
11 questions with solutions
1–3 marks · Mixed difficulty
- 12 marks
Question 1
Fill in the blanks:
(i) The solution used in a Voltaic cell is called ________.
(ii) A current carrying coil behaves like a ________.
Solve with AIWritten solution
(i) The solution used in a Voltaic cell is called an electrolyte. It is usually a weak acid or a salt solution in which the two metal rods (electrodes) are partly dipped.
(ii) A current carrying coil behaves like a magnet (an electromagnet). It deflects a compass needle and attracts iron paper clips only while the current flows through it.
- 23 marks
Question 2
Choose the correct option:
(i) Dry cells are less portable compared to Voltaic cells. (True/False)
(ii) A coil becomes an electromagnet only when electric current flows through it. (True/False)
(iii) An electromagnet, using a single cell, attracts more iron paper clips than the same electromagnet with a battery of 2 cells. (True/False)
Solve with AIWritten solution
(i) False. Dry cells are more portable than Voltaic cells. A Voltaic cell keeps a liquid electrolyte in a glass or plastic container, so it is not convenient for everyday use. In a dry cell the electrolyte is not a liquid but a thick moist paste, so the cell can be carried around easily.
(ii) True. A coil behaves as a magnet only while electric current flows through it. When the current is stopped, the coil loses its magnetic effect.
(iii) False. A battery of 2 cells gives a larger current than a single cell. A larger current makes the electromagnet stronger, so the same electromagnet with the battery of 2 cells attracts more iron paper clips, not fewer.
- 31 mark
Question 3
An electric current flows through a nichrome wire for a short time.
(i) The wire becomes warm.
(ii) A magnetic compass placed below the wire is deflected.
Choose the correct option:
(a) Only (i) is correct
(b) Only (ii) is correct
(c) Both (i) and (ii) are correct
(d) Both (i) and (ii) are not correct
Solve with AIWritten solution
(c) Both (i) and (ii) are correct.
Statement (i) is correct. A nichrome wire offers resistance to the flow of current. This resistance converts some of the electrical energy into heat energy, so the wire becomes warm. This is the heating effect of electric current.
Statement (ii) is correct. When electric current flows through a conductor (like a wire), it produces a magnetic field around it. Nichrome is a conductor, so the compass needle placed below the wire is deflected. This is the magnetic effect of electric current.
Both effects happen together whenever current flows through the wire.
- 42 marks
Question 4
Match the items in Column A with those in Column B.
Column A Column B (i) Voltaic cell (a) Best suited for electric heater (ii) Electric iron (b) Works on magnetic effect of electric current (iii) Nichrome wire (c) Works on heating effect of electric current (iv) Electromagnet (d) Chemical reactions Solve with AIWritten solution
(i) - (d), (ii) - (c), (iii) - (a), (iv) - (b)
Column A Column B (i) Voltaic cell (d) Chemical reactions (ii) Electric iron (c) Works on heating effect of electric current (iii) Nichrome wire (a) Best suited for electric heater (iv) Electromagnet (b) Works on magnetic effect of electric current -
Voltaic cell: a chemical reaction between the metal rods and the electrolyte produces electricity.
-
Electric iron: it has a heating element that gets hot when current flows through it.
-
Nichrome wire: it offers a high resistance, so it heats up a lot when current flows; that is why it is used in heaters.
-
Electromagnet: a current carrying coil behaves as a magnet only while the current flows.
-
- 51 mark
Question 5
Nichrome wire is commonly used in electrical heating devices because it
(i) is a good conductor of electricity.
(ii) generates more heat for a given current.
(iii) is cheaper than copper.
(iv) is an insulator of electricity.
Solve with AIWritten solution
(ii) generates more heat for a given current.
A nichrome wire offers a higher resistance than a copper wire of the same size and length. This resistance converts more of the electrical energy into heat energy, so the wire gets hot. A heating device needs exactly this.
-
(i) is not the reason. Copper lets current pass more easily than nichrome, yet copper is used for connecting wires, not heating elements, because it does not heat up as much.
-
(iii) is not the reason. Nichrome is chosen for the heat it produces, not for its price.
-
(iv) is wrong. Nichrome is a conductor: current flows through it in Activity 4.5. An insulator would not let current flow, so it would not heat up at all.
-
- 63 marks
Question 6
Electric heating devices (like an electric heater or a stove) are often considered more convenient than traditional heating methods (like burning firewood or charcoal). Give reason(s) to support this statement considering societal impact.
Solve with AIWritten solution
Electric heating devices are more convenient for families and for society because:
1. Cleaner air and better health. Burning firewood or charcoal gives out smoke and harmful gases inside the home. The smoke stings the eyes and makes breathing difficult, especially for the people who cook every day. An electric heater or stove gives no smoke where it is used.
2. Saves time, effort and trees. Firewood has to be collected or bought, carried home and stored in a dry place, and charcoal must also be bought and stored. An electric device only needs a switch and a socket. Using less firewood also means fewer trees are cut.
3. Easy to control and clean. An electric device heats up as soon as it is switched on and stops when it is switched off. Its heat can be controlled, and it leaves no ash or soot to clean. There is no open fire in the room.
Care needed: electric heating devices must be used with proper wires, plugs and sockets. Overheating may melt plastic parts of plugs and sockets, or even lead to fires.
- 73 marks
Question 7
Look at the Fig. 4.4a. If the compass placed near the coil deflects:

(i) Draw an arrow on the diagram to show the path of the electric current.
(ii) Explain why the compass needle moves when current flows.
(iii) Predict what would happen to the deflection if you reverse the battery terminals.
Solve with AIWritten solution
(i) Electric current flows from the positive (+) terminal of the cell, through the circuit, to the negative (-) terminal. In Fig. 4.4a the + terminal is at the right end of the cell. So the current goes up the right-hand wire to end B, through the turns of the coil from end B to end A, and then down the left-hand wire back to the - terminal, as shown by the arrows.

(ii) When current flows through the coil, it produces a magnetic field around it, so the coil with the iron nail becomes an electromagnet with two poles. The compass needle is a tiny magnet. The magnetic field of the electromagnet attracts one pole of the needle and repels the other, so the needle turns. When the current stops, the magnetic field disappears and the needle returns to its original direction.
(iii) Reversing the battery terminals reverses the direction of the current in the coil. This reverses the poles of the electromagnet: ends A and B exchange their poles (if end A was a south pole, it now becomes a north pole). So the compass needle is still deflected, but in the opposite direction: the pole of the needle that was attracted towards end A is now pushed away, and the other pole turns towards end A.
- 83 marks
Question 8
Suppose Sumana forgets to move the switch of her lifting electromagnet model to OFF position (in introduction story). After some time, the iron nail no longer picks up the iron paper clips, but the wire wrapped around the iron nail is still warm. Why did the lifting electromagnet stop lifting the clips? Give possible reasons.
Solve with AIWritten solution
The nail lifts the clips only while enough electric current flows through the coil. Possible reasons why it stopped:
1. The battery got used up. With the switch left ON, current flowed for a long time. Over time the chemicals inside the cells got used up, so the battery stopped supplying current (it became "dead"). With no current, the coil lost its magnetic effect and the clips were no longer attracted. The book warns that keeping a coil connected to a cell for more than a few seconds makes the cell weaken quickly.
2. The current became too small. Even before the battery is fully dead, a weakened battery gives a smaller current. A smaller current makes a weaker electromagnet, which may be too weak to lift the clips.
3. A connection came loose. If a wire came off the battery or the switch, the circuit would break and the current would stop.
Why is the wire still warm? While the current flowed for a long time, the heating effect of electric current warmed the wire. When the current stops, the magnetic effect disappears at once, but the warm wire takes some time to cool down. So the wire can still be warm even though the nail no longer lifts the clips.
- 92 marks
Question 9
In Fig. 4.12, in which case the LED will glow when the switch is closed?
Solve with AIWritten solution
The LED will glow in case (a).
Case (a): an iron nail and a copper strip (two different metals) are dipped in lemon juice. Lemon juice is a weak acid, so it acts as an electrolyte, and the set-up works like a Voltaic cell, just like the lemon cell of Activity 4.6. Copper acts as the positive electrode, and the LED is joined the right way round: its positive side is connected through the switch to the copper strip. So when the switch is closed, current flows and the LED glows.
Case (b): the same metals are dipped in pure water. Pure water is not a weak acid or a salt solution, so it does not act as an electrolyte. No electricity is produced, and the LED does not glow.
In practice one such cell gives only a small current. In Activity 4.6 five or six lemon cells are joined together so that the LED glows clearly.
- 102 marks
Question 10
Neha keeps the coil exactly the same as in Activity 4.4 but slides the iron nail out, leaving only the coiled wire. Will the coil still deflect the compass? If yes, will the deflection be more or less than before?
Solve with AIWritten solution
Yes, the coil will still deflect the compass. A current carrying coil behaves like a magnet even without an iron core. In Activity 4.3 the coil on the paper cylinder deflected the compass needles before the nail was put in.
The deflection will be less than before. The iron nail inside the coil makes the electromagnet a much stronger magnet. When the nail is slid out, only the coil is left, which is a weaker magnet, so the compass needle deflects less.
- 111 mark
Question 11
We have four coils, of similar shape and size, made up from iron, copper, aluminium, and nichrome as shown in Fig. 4.13.

When current is passed through the coils, compass needles placed near the coils will show deflection.
(i) Only in circuit (a)
(ii) Only in circuits (a) and (b)
(iii) Only in circuits (a), (b), and (c)
(iv) In all four circuits
Solve with AIWritten solution
(iv) In all four circuits.
Iron, copper, aluminium and nichrome are all conductors of electricity. When electric current flows through any conductor, it produces a magnetic field around it. This is the magnetic effect of electric current. So every coil behaves like a magnet while current flows, and the compass near each coil is deflected.
It does not matter that only iron is a magnetic material. The magnetic field here is produced by the current flowing in the wire, not by the material of the wire. Copper, aluminium and nichrome are not attracted by a magnet, yet coils made from them still deflect the compass when current flows.
(The switches are drawn open in Fig. 4.13; the question is about the moment current is passed, that is, with the switches closed.)
What Class 8 Science Ch 4 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01Does an Electric Current Have a Magnetic Effect?
- 02Electromagnets
- 03Does a Current Carrying Wire Get Hot?
- 04How Does a Battery Generate Electricity?
- 05Extended Learning
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 4 before.
Class 8 Science Ch 4 questions students ask
How many questions are there in Class 8 Science Ch 4?
11 questions. Every one is solved step by step on this page.
Are these Class 8 Physics question answers free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 8 Physics Ch 4 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
