Using an LED that requires two cells in series to glow, Tanya made the circuit as shown in Fig. 3.21. Will the lamp glow? If not, draw the wires for correct connections.
![Class 7 Science [NCERT New Edition] Electricity: Circuits & Components Question 11](/_next/image/?url=https%3A%2F%2Fcontent.supalearn.com%2Fstorage%2Fv1%2Fobject%2Fpublic%2Fimages%2Fb01a320c-a9f7-4744-a9bc-bdfb33a81cf6-23678_q.png&w=3840&q=75)
Confirming your payment
Electricity: Circuits & Components · Question 11 of 11
Using an LED that requires two cells in series to glow, Tanya made the circuit as shown in Fig. 3.21. Will the lamp glow? If not, draw the wires for correct connections.
![Class 7 Science [NCERT New Edition] Electricity: Circuits & Components Question 11](/_next/image/?url=https%3A%2F%2Fcontent.supalearn.com%2Fstorage%2Fv1%2Fobject%2Fpublic%2Fimages%2Fb01a320c-a9f7-4744-a9bc-bdfb33a81cf6-23678_q.png&w=3840&q=75)
No, the LED (lamp) will not glow.
Look at the terminals in Fig. 3.21:
An LED lights up only when its positive terminal is connected to the positive terminal of the battery and its negative terminal to the negative terminal of the battery, so it does not glow here.
Correct connections (keep the cells where they are; remove the black and green wires):

Now current flows from the positive terminal of the battery into the longer wire of the LED, through the LED, out of its shorter wire and back to the negative terminal of the battery, so the LED glows. Turning the upper cell around and keeping the black, green and yellow wires as they are also works.