Confirming your payment

Skip to content

Opening your dashboard

Class 12 Chemistry Chapter 5: Coordination Compounds Solutions

41 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.

AI Tutor

Get talked through Ch 5, not just shown the answer

Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.

  • Ask it out loud, in your own words
  • It gives you the next step, not the answer
  • Stuck on part (ii)? Start there
Ch 5 solutions

41 questions with solutions

1–5 marks · Mixed difficulty

The first 22 solutions are on this page. This chapter is a long one, so the rest open on their own page to keep this one quick to load.

  1. 1

    Question 1

    Explain the bonding in coordination compounds in terms of Werner's postulates.

    Medium
    3 marks
    Solve with AI
    Written solution

    Werner (1898) explained the bonding in compounds such as CoCl3⋅6NH3\text{CoCl}_3\cdot 6\text{NH}_3 by giving the metal two kinds of valence.

    Postulate 1. In coordination compounds a metal shows two types of linkages (valences): primary and secondary.

    Postulate 2. The primary valences are normally ionisable and are satisfied by negative ions. (In modern terms the primary valence corresponds to the oxidation state of the metal.)

    Postulate 3. The secondary valences are non-ionisable. They are satisfied by neutral molecules or negative ions. The secondary valence equals the coordination number and is fixed for a metal.

    Postulate 4. The groups bound by the secondary linkages have characteristic spatial arrangements corresponding to the coordination number. These arrangements are now called coordination polyhedra (octahedral, tetrahedral, square planar).

    Class 12 Chemistry Coordination Compounds

    The evidence Werner used (NCERT Table 5.1). With excess AgNO3\text{AgNO}_3 in the cold, only the chloride held by primary valence precipitates as AgCl, and the conductivity shows how many ions each compound gives:

    CompoundMol AgCl per molFormulationElectrolyte type
    CoCl3⋅6NH3\text{CoCl}_3\cdot 6\text{NH}_3 (yellow)3[Co(NH3)6]3+ 3Cl−[\text{Co(NH}_3)_6]^{3+}\ 3\text{Cl}^-1:3
    CoCl3⋅5NH3\text{CoCl}_3\cdot 5\text{NH}_3 (purple)2[CoCl(NH3)5]2+ 2Cl−[\text{CoCl(NH}_3)_5]^{2+}\ 2\text{Cl}^-1:2
    CoCl3⋅4NH3\text{CoCl}_3\cdot 4\text{NH}_3 (green)1[CoCl2(NH3)4]+ Cl−[\text{CoCl}_2(\text{NH}_3)_4]^{+}\ \text{Cl}^-1:1
    CoCl3⋅4NH3\text{CoCl}_3\cdot 4\text{NH}_3 (violet)1[CoCl2(NH3)4]+ Cl−[\text{CoCl}_2(\text{NH}_3)_4]^{+}\ \text{Cl}^-1:1

    In every compound six groups stay bound to cobalt (secondary valence = 6), while the primary valence is 3. A chloride inside the square bracket satisfies both valences at once, which is why it is not precipitated. The last two compounds have the same formula but different properties: they are isomers, which Werner explained by the definite spatial arrangement (Postulate 4).

    Thus, in Werner's theory the metal is bonded to ionisable groups by primary valence and to a fixed number of ligands, arranged in a definite geometry, by secondary valence.

  2. 2

    Question 2

    FeSO4\text{FeSO}_4 solution mixed with (NH4)2SO4(\text{NH}_4)_2\text{SO}_4 solution in 1:1 molar ratio gives the test of Fe2+\text{Fe}^{2+} ion but CuSO4\text{CuSO}_4 solution mixed with aqueous ammonia in 1:4 molar ratio does not give the test of Cu2+\text{Cu}^{2+} ion. Explain why.

    Medium
    2 marks
    Solve with AI
    Written solution

    1. FeSO4+(NH4)2SO4\text{FeSO}_4 + (\text{NH}_4)_2\text{SO}_4 (1:1) forms a double salt. The product is Mohr's salt, FeSO4⋅(NH4)2SO4⋅6H2O\text{FeSO}_4\cdot(\text{NH}_4)_2\text{SO}_4\cdot 6\text{H}_2\text{O}. A double salt exists only in the solid; in water it dissociates completely into simple ions:

    FeSO4⋅(NH4)2SO4⋅6H2O→Fe2++2NH4++2SO42−+6H2O\text{FeSO}_4\cdot(\text{NH}_4)_2\text{SO}_4\cdot 6\text{H}_2\text{O} \rightarrow \text{Fe}^{2+} + 2\text{NH}_4^+ + 2\text{SO}_4^{2-} + 6\text{H}_2\text{O}

    Free Fe2+\text{Fe}^{2+} ions are present, so the solution gives the test of Fe2+\text{Fe}^{2+}.

    2. CuSO4+4NH3\text{CuSO}_4 + 4\text{NH}_3 (1:4) forms a complex.

    CuSO4+4NH3→[Cu(NH3)4]SO4\text{CuSO}_4 + 4\text{NH}_3 \rightarrow [\text{Cu(NH}_3)_4]\text{SO}_4

    The coordination entity [Cu(NH3)4]2+[\text{Cu(NH}_3)_4]^{2+} does not dissociate into Cu2+\text{Cu}^{2+} and NH3\text{NH}_3; in water only the counter ion separates:

    [Cu(NH3)4]SO4→[Cu(NH3)4]2++SO42−[\text{Cu(NH}_3)_4]\text{SO}_4 \rightarrow [\text{Cu(NH}_3)_4]^{2+} + \text{SO}_4^{2-}

    Class 12 Chemistry Coordination Compounds

    There are no free Cu2+\text{Cu}^{2+} ions in solution, so the test for Cu2+\text{Cu}^{2+} is negative.

    In short: a double salt loses its identity in solution, a complex keeps it.

  3. 3

    Question 3

    Explain with two examples each of the following: coordination entity, ligand, coordination number, coordination polyhedron, homoleptic and heteroleptic.

    Medium
    5 marks
    Solve with AI
    Written solution

    (i) Coordination entity. A central metal atom or ion bonded to a fixed number of ions or molecules. It may be a cation, an anion or neutral.

    Examples: [Co(NH3)6]3+[\text{Co(NH}_3)_6]^{3+} (cationic), [Ni(CO)4][\text{Ni(CO)}_4] (neutral), [Fe(CN)6]4−[\text{Fe(CN)}_6]^{4-} (anionic).

    (ii) Ligand. An ion or molecule bound to the central atom/ion in a coordination entity; it donates an electron pair (acts as a Lewis base).

    Examples: Cl−\text{Cl}^-, H2O\text{H}_2\text{O}, NH3\text{NH}_3, H2NCH2CH2NH2\text{H}_2\text{NCH}_2\text{CH}_2\text{NH}_2 (en).

    (iii) Coordination number (CN). The number of ligand donor atoms directly bonded to the metal (only σ bonds are counted).

    Examples: CN of Pt in [PtCl6]2−[\text{PtCl}_6]^{2-} is 6; CN of Ni in [Ni(NH3)4]2+[\text{Ni(NH}_3)_4]^{2+} is 4. In [Co(en)3]3+[\text{Co(en)}_3]^{3+} it is 6, because each en is didentate.

    (iv) Coordination polyhedron. The spatial arrangement of the donor atoms directly attached to the central atom/ion.

    Examples: [Co(NH3)6]3+[\text{Co(NH}_3)_6]^{3+} is octahedral, [Ni(CO)4][\text{Ni(CO)}_4] is tetrahedral, [PtCl4]2−[\text{PtCl}_4]^{2-} is square planar.

    Class 12 Chemistry Coordination Compounds

    (v) Homoleptic complex. The metal is bound to only one kind of donor group.

    Examples: [Co(NH3)6]3+[\text{Co(NH}_3)_6]^{3+}, [Fe(CN)6]4−[\text{Fe(CN)}_6]^{4-}.

    (vi) Heteroleptic complex. The metal is bound to more than one kind of donor group.

    Examples: [Co(NH3)4Cl2]+[\text{Co(NH}_3)_4\text{Cl}_2]^+, [Pt(NH3)2Cl2][\text{Pt(NH}_3)_2\text{Cl}_2].

  4. 4

    Question 4

    What is meant by unidentate, didentate and ambidentate ligands? Give two examples for each.

    Medium
    3 marks
    Solve with AI
    Written solution

    Unidentate ligand: a ligand that binds to the metal through a single donor atom.

    Examples: NH3\text{NH}_3 (donor N), Cl−\text{Cl}^- (donor Cl), H2O\text{H}_2\text{O} (donor O).

    Didentate ligand: a ligand that binds through two donor atoms at the same time, forming a ring (chelate) with the metal.

    Examples: ethane-1,2-diamine, H2NCH2CH2NH2\text{H}_2\text{NCH}_2\text{CH}_2\text{NH}_2 (en), which binds through both N atoms; oxalate, C2O42−\text{C}_2\text{O}_4^{2-} (ox), which binds through two O atoms.

    Ambidentate ligand: a ligand that has two different donor atoms but binds through only one of them at a time.

    Examples: nitrite, NO2−\text{NO}_2^-, which binds through N (M−NO2\text{M}-\text{NO}_2, nitrito-N) or through O (M−ONO\text{M}-\text{ONO}, nitrito-O); thiocyanate, SCN−\text{SCN}^-, which binds through S (M−SCN\text{M}-\text{SCN}, thiocyanato-S) or through N (M−NCS\text{M}-\text{NCS}, thiocyanato-N).

    Class 12 Chemistry Coordination Compounds

    Because an ambidentate ligand can bind in two ways, it gives rise to linkage isomerism.

  5. 5

    Question 5

    Specify the oxidation numbers of the metals in the following coordination entities:

    (i) [Co(H2O)(CN)(en)2]2+[\text{Co(H}_2\text{O)(CN)(en)}_2]^{2+}    (ii) [CoBr2(en)2]+[\text{CoBr}_2(\text{en})_2]^{+}    (iii) [PtCl4]2−[\text{PtCl}_4]^{2-}    (iv) K3[Fe(CN)6]\text{K}_3[\text{Fe(CN)}_6]    (v) [Cr(NH3)3Cl3][\text{Cr(NH}_3)_3\text{Cl}_3]

    Medium
    5 marks
    Solve with AI
    Written solution

    Method: sum of (oxidation number of metal) + (charges of all ligands) = charge on the coordination entity. H2O\text{H}_2\text{O}, NH3\text{NH}_3 and en are neutral; CN−\text{CN}^-, Cl−\text{Cl}^-, Br−\text{Br}^- carry −1. Let the oxidation number be xx.

    (i) [Co(H2O)(CN)(en)2]2+[\text{Co(H}_2\text{O)(CN)(en)}_2]^{2+}

    x+0+(−1)+2(0)=+2⇒x=+3x + 0 + (-1) + 2(0) = +2 \Rightarrow x = +3

    (ii) [CoBr2(en)2]+[\text{CoBr}_2(\text{en})_2]^{+}

    x+2(−1)+2(0)=+1⇒x=+3x + 2(-1) + 2(0) = +1 \Rightarrow x = +3

    (iii) [PtCl4]2−[\text{PtCl}_4]^{2-}

    x+4(−1)=−2⇒x=+2x + 4(-1) = -2 \Rightarrow x = +2

    (iv) K3[Fe(CN)6]\text{K}_3[\text{Fe(CN)}_6]: three K+\text{K}^+ make the complex ion [Fe(CN)6]3−[\text{Fe(CN)}_6]^{3-}.

    x+6(−1)=−3⇒x=+3x + 6(-1) = -3 \Rightarrow x = +3

    (v) [Cr(NH3)3Cl3][\text{Cr(NH}_3)_3\text{Cl}_3] (neutral entity)

    x+3(0)+3(−1)=0⇒x=+3x + 3(0) + 3(-1) = 0 \Rightarrow x = +3

    EntityMetalOxidation number
    [Co(H2O)(CN)(en)2]2+[\text{Co(H}_2\text{O)(CN)(en)}_2]^{2+}Co+3
    [CoBr2(en)2]+[\text{CoBr}_2(\text{en})_2]^{+}Co+3
    [PtCl4]2−[\text{PtCl}_4]^{2-}Pt+2
    K3[Fe(CN)6]\text{K}_3[\text{Fe(CN)}_6]Fe+3
    [Cr(NH3)3Cl3][\text{Cr(NH}_3)_3\text{Cl}_3]Cr+3
  6. 6

    Question 6

    Using IUPAC norms write the formulas for the following:

    (i) Tetrahydroxidozincate(II)    (ii) Potassium tetrachloridopalladate(II)    (iii) Diamminedichloridoplatinum(II)    (iv) Potassium tetracyanidonickelate(II)    (v) Pentaamminenitrito-O-cobalt(III)

    (vi) Hexaamminecobalt(III) sulphate    (vii) Potassium tri(oxalato)chromate(III)    (viii) Hexaammineplatinum(IV)    (ix) Tetrabromidocuprate(II)    (x) Pentaamminenitrito-N-cobalt(III)

    Medium
    5 marks
    Solve with AI
    Written solution

    How to build each formula: write the metal first, then the ligands, enclose the entity in square brackets, find the charge of the entity from (oxidation state + ligand charges), and balance it with the counter ions. The ending "-ate" tells us the entity is an anion.

    NameCharge of entityFormula
    (i)Tetrahydroxidozincate(II)+2+4(−1)=−2+2 + 4(-1) = -2[Zn(OH)4]2−[\text{Zn(OH)}_4]^{2-}
    (ii)Potassium tetrachloridopalladate(II)+2+4(−1)=−2+2 + 4(-1) = -2K2[PdCl4]\text{K}_2[\text{PdCl}_4]
    (iii)Diamminedichloridoplatinum(II)+2+2(−1)=0+2 + 2(-1) = 0[Pt(NH3)2Cl2][\text{Pt(NH}_3)_2\text{Cl}_2]
    (iv)Potassium tetracyanidonickelate(II)+2+4(−1)=−2+2 + 4(-1) = -2K2[Ni(CN)4]\text{K}_2[\text{Ni(CN)}_4]
    (v)Pentaamminenitrito-O-cobalt(III)+3+(−1)=+2+3 + (-1) = +2[Co(NH3)5(ONO)]2+[\text{Co(NH}_3)_5(\text{ONO})]^{2+}
    (vi)Hexaamminecobalt(III) sulphate+3+3[Co(NH3)6]2(SO4)3[\text{Co(NH}_3)_6]_2(\text{SO}_4)_3
    (vii)Potassium tri(oxalato)chromate(III)+3+3(−2)=−3+3 + 3(-2) = -3K3[Cr(C2O4)3]\text{K}_3[\text{Cr(C}_2\text{O}_4)_3]
    (viii)Hexaammineplatinum(IV)+4+4[Pt(NH3)6]4+[\text{Pt(NH}_3)_6]^{4+}
    (ix)Tetrabromidocuprate(II)+2+4(−1)=−2+2 + 4(-1) = -2[CuBr4]2−[\text{CuBr}_4]^{2-}
    (x)Pentaamminenitrito-N-cobalt(III)+3+(−1)=+2+3 + (-1) = +2[Co(NH3)5(NO2)]2+[\text{Co(NH}_3)_5(\text{NO}_2)]^{2+}

    Points to notice:

    • In (v) the nitrite ion is bound through oxygen, so it is written ONO; in (x) it is bound through nitrogen, written NO2\text{NO}_2. These two are linkage isomers.
    • In (vi) two [Co(NH3)6]3+[\text{Co(NH}_3)_6]^{3+} ions (total +6) are balanced by three SO42−\text{SO}_4^{2-} ions (total −6).
    • In (v) and (x) NH3\text{NH}_3 is written before ONO / NO2\text{NO}_2 because ligand formulas are listed alphabetically by their first symbol (N before O; for NH3\text{NH}_3 and NO2\text{NO}_2, H before O). The book itself writes [Co(NH3)5(NO2)]Cl2[\text{Co(NH}_3)_5(\text{NO}_2)]\text{Cl}_2.
  7. 7

    Question 7

    Using IUPAC norms write the systematic names of the following:

    (i) [Co(NH3)6]Cl3[\text{Co(NH}_3)_6]\text{Cl}_3    (ii) [Pt(NH3)2Cl(NH2CH3)]Cl[\text{Pt(NH}_3)_2\text{Cl(NH}_2\text{CH}_3)]\text{Cl}    (iii) [Ti(H2O)6]3+[\text{Ti(H}_2\text{O)}_6]^{3+}

    (iv) [Co(NH3)4Cl(NO2)]Cl[\text{Co(NH}_3)_4\text{Cl(NO}_2)]\text{Cl}    (v) [Mn(H2O)6]2+[\text{Mn(H}_2\text{O)}_6]^{2+}    (vi) [NiCl4]2−[\text{NiCl}_4]^{2-}

    (vii) [Ni(NH3)6]Cl2[\text{Ni(NH}_3)_6]\text{Cl}_2    (viii) [Co(en)3]3+[\text{Co(en)}_3]^{3+}    (ix) [Ni(CO)4][\text{Ni(CO)}_4]

    Medium
    5 marks
    Solve with AI
    Written solution

    Rules used: ligands are named in alphabetical order before the metal (multiplying prefixes ignored); neutral ligands keep special names (aqua, ammine, carbonyl); anionic ligands end in -ido/-o; the metal takes "-ate" in an anion; the oxidation state follows in Roman numerals; the cation is named first.

    FormulaOxidation stateIUPAC name
    (i)[Co(NH3)6]Cl3[\text{Co(NH}_3)_6]\text{Cl}_3+3Hexaamminecobalt(III) chloride
    (ii)[Pt(NH3)2Cl(NH2CH3)]Cl[\text{Pt(NH}_3)_2\text{Cl(NH}_2\text{CH}_3)]\text{Cl}+2Diamminechlorido(methanamine)platinum(II) chloride
    (iii)[Ti(H2O)6]3+[\text{Ti(H}_2\text{O)}_6]^{3+}+3Hexaaquatitanium(III) ion
    (iv)[Co(NH3)4Cl(NO2)]Cl[\text{Co(NH}_3)_4\text{Cl(NO}_2)]\text{Cl}+3Tetraamminechloridonitrito-N-cobalt(III) chloride
    (v)[Mn(H2O)6]2+[\text{Mn(H}_2\text{O)}_6]^{2+}+2Hexaaquamanganese(II) ion
    (vi)[NiCl4]2−[\text{NiCl}_4]^{2-}+2Tetrachloridonickelate(II) ion
    (vii)[Ni(NH3)6]Cl2[\text{Ni(NH}_3)_6]\text{Cl}_2+2Hexaamminenickel(II) chloride
    (viii)[Co(en)3]3+[\text{Co(en)}_3]^{3+}+3Tris(ethane-1,2-diamine)cobalt(III) ion
    (ix)[Ni(CO)4][\text{Ni(CO)}_4]0Tetracarbonylnickel(0)

    Points to notice:

    • (ii): ammine (a), chlorido (c), methanamine (m) are in alphabetical order; methanamine is placed in parentheses.
    • (iv): the charge check is x+4(0)+(−1)+(−1)=+1x + 4(0) + (-1) + (-1) = +1, so x=+3x = +3; NO2\text{NO}_2 written this way is bound through N (nitrito-N).
    • (vi): the entity is an anion, so nickel becomes nickelate.
    • (viii): the ligand name ethane-1,2-diamine already contains a number, so tris is used and the name is put in parentheses.
  8. 8

    Question 8

    List various types of isomerism possible for coordination compounds, giving an example of each.

    Medium
    5 marks
    Solve with AI
    Written solution

    Coordination compounds show two main kinds of isomerism, each with sub-types.

    A. Stereoisomerism (same bonds, different spatial arrangement)

    1. Geometrical isomerism: ligands occupy different relative positions (cis/trans, fac/mer). Example: cis- and trans-[Pt(NH3)2Cl2][\text{Pt(NH}_3)_2\text{Cl}_2]; also cis/trans-[Co(NH3)4Cl2]+[\text{Co(NH}_3)_4\text{Cl}_2]^+.

    2. Optical isomerism: non-superimposable mirror images (d and l forms, enantiomers). Example: d- and l-[Co(en)3]3+[\text{Co(en)}_3]^{3+}.

    Class 12 Chemistry Coordination Compounds

    B. Structural isomerism (different bonds)

    TypeHow the isomers differExample (NCERT)
    Linkagean ambidentate ligand binds through a different donor atom[Co(NH3)5(NO2)]Cl2[\text{Co(NH}_3)_5(\text{NO}_2)]\text{Cl}_2 (yellow, N-bound) and [Co(NH3)5(ONO)]Cl2[\text{Co(NH}_3)_5(\text{ONO})]\text{Cl}_2 (red, O-bound)
    Coordinationligands are interchanged between the cationic and anionic entities[Co(NH3)6][Cr(CN)6][\text{Co(NH}_3)_6][\text{Cr(CN)}_6] and [Cr(NH3)6][Co(CN)6][\text{Cr(NH}_3)_6][\text{Co(CN)}_6]
    Ionisationa counter ion and a ligand exchange places, so different ions form in solution[Co(NH3)5(SO4)]Br[\text{Co(NH}_3)_5(\text{SO}_4)]\text{Br} and [Co(NH3)5Br]SO4[\text{Co(NH}_3)_5\text{Br}]\text{SO}_4
    Solvate (hydrate)a solvent (water) molecule is either a ligand or free lattice solvent[Cr(H2O)6]Cl3[\text{Cr(H}_2\text{O)}_6]\text{Cl}_3 (violet) and [Cr(H2O)5Cl]Cl2⋅H2O[\text{Cr(H}_2\text{O)}_5\text{Cl}]\text{Cl}_2\cdot\text{H}_2\text{O} (grey-green)

    So the six types are: geometrical, optical, linkage, coordination, ionisation and solvate isomerism.

  9. 9

    Question 9

    How many geometrical isomers are possible in the following coordination entities?

    (i) [Cr(C2O4)3]3−[\text{Cr(C}_2\text{O}_4)_3]^{3-}    (ii) [Co(NH3)3Cl3][\text{Co(NH}_3)_3\text{Cl}_3]

    Medium
    2 marks
    Solve with AI
    Written solution

    (i) [Cr(C2O4)3]3−[\text{Cr(C}_2\text{O}_4)_3]^{3-}: no geometrical isomer (0).

    It is an octahedral [M(AA)3][\text{M(AA)}_3] entity. Each oxalate is didentate and must span two cis positions, and all three chelating ligands are identical, so there is only one possible relative arrangement: nothing can be cis or trans to anything different. (It does, however, exist as a pair of optical isomers; see Exercise 5.10.)

    (ii) [Co(NH3)3Cl3][\text{Co(NH}_3)_3\text{Cl}_3]: two geometrical isomers.

    It is an octahedral [Ma3b3][\text{Ma}_3\text{b}_3] entity:

    • fac (facial) isomer: the three NH3\text{NH}_3 occupy the corners of one triangular face, so every NH3\text{NH}_3 is cis to the other two.
    • mer (meridional) isomer: the three NH3\text{NH}_3 lie around a meridian of the octahedron, so two of them are trans to each other.

    Class 12 Chemistry Coordination Compounds

    Answer: (i) 0, (ii) 2 (fac and mer).

  10. 10

    Question 10

    Draw the structures of optical isomers of:

    (i) [Cr(C2O4)3]3−[\text{Cr(C}_2\text{O}_4)_3]^{3-}    (ii) [PtCl2(en)2]2+[\text{PtCl}_2(\text{en})_2]^{2+}    (iii) [Cr(NH3)2Cl2(en)]+[\text{Cr(NH}_3)_2\text{Cl}_2(\text{en})]^{+}

    Hard
    3 marks
    Solve with AI
    Written solution

    Optical isomers are non-superimposable mirror images (d and l forms). They arise when the entity has no plane of symmetry, which is common with chelating (didentate) ligands.

    (i) [Cr(C2O4)3]3−[\text{Cr(C}_2\text{O}_4)_3]^{3-}

    Three oxalate chelates wrap around Cr like the blades of a propeller. The left-handed and right-handed propellers are mirror images that cannot be superimposed, so the entity exists as d and l forms.

    Class 12 Chemistry Coordination Compounds

    (ii) [PtCl2(en)2]2+[\text{PtCl}_2(\text{en})_2]^{2+}

    Only the cis isomer is optically active. In the trans isomer the two Cl lie opposite each other and the two en rings lie in one plane, which is a plane of symmetry, so the trans form is identical to its mirror image.

    Class 12 Chemistry Coordination Compounds

    (iii) [Cr(NH3)2Cl2(en)]+[\text{Cr(NH}_3)_2\text{Cl}_2(\text{en})]^{+}

    This entity has three geometrical isomers. The two in which the pair of NH3\text{NH}_3 (or the pair of Cl) is trans have a mirror plane and are optically inactive. The isomer in which the two NH3\text{NH}_3 are cis and the two Cl are cis has no plane of symmetry and exists as a d/l pair:

    Class 12 Chemistry Coordination Compounds

  11. 11

    Question 11

    Draw all the isomers (geometrical and optical) of:

    (i) [CoCl2(en)2]+[\text{CoCl}_2(\text{en})_2]^{+}    (ii) [Co(NH3)Cl(en)2]2+[\text{Co(NH}_3)\text{Cl(en)}_2]^{2+}    (iii) [Co(NH3)2Cl2(en)]+[\text{Co(NH}_3)_2\text{Cl}_2(\text{en})]^{+}

    Hard
    3 marks
    Solve with AI
    Written solution

    In each case the en (didentate) ligand must span two cis positions of the octahedron.

    (i) [CoCl2(en)2]+[\text{CoCl}_2(\text{en})_2]^{+}: 2 geometrical isomers, 3 stereoisomers in all.

    • trans: the two Cl are opposite; the two en rings lie in one plane, which is a mirror plane, so trans is optically inactive.
    • cis: the two Cl are adjacent; there is no plane of symmetry, so cis exists as a d/l pair.

    Class 12 Chemistry Coordination Compounds

    (ii) [Co(NH3)Cl(en)2]2+[\text{Co(NH}_3)\text{Cl(en)}_2]^{2+}: 2 geometrical isomers, 3 stereoisomers in all.

    Exactly as in (i), with Cl and NH3\text{NH}_3 in place of the two Cl: trans (Cl opposite NH3\text{NH}_3) is optically inactive; cis is chiral and exists as d and l forms.

    Class 12 Chemistry Coordination Compounds

    (iii) [Co(NH3)2Cl2(en)]+[\text{Co(NH}_3)_2\text{Cl}_2(\text{en})]^{+}: 3 geometrical isomers, 4 stereoisomers in all.

    • (1) the two NH3\text{NH}_3 trans, the two Cl cis: mirror plane, inactive;
    • (2) the two Cl trans, the two NH3\text{NH}_3 cis: mirror plane, inactive;
    • (3) both pairs cis: no mirror plane, so it exists as a d/l pair.

    Class 12 Chemistry Coordination Compounds

  12. 12

    Question 12

    Write all the geometrical isomers of [Pt(NH3)(Br)(Cl)(py)][\text{Pt(NH}_3)(\text{Br})(\text{Cl})(\text{py})] and how many of these will exhibit optical isomers?

    Hard
    3 marks
    Solve with AI
    Written solution

    Pt2+\text{Pt}^{2+} (5d85d^8) forms a square planar entity of the type [Mabcd][\text{Mabcd}] with four different unidentate ligands.

    Geometrical isomers. Fix NH3\text{NH}_3 at one corner. The ligand trans to it can be py, Cl or Br, and once that is chosen the other two positions are fixed (their swap gives the same molecule turned over). So there are three geometrical isomers:

    • (i) NH3\text{NH}_3 trans to py
    • (ii) NH3\text{NH}_3 trans to Cl
    • (iii) NH3\text{NH}_3 trans to Br

    Class 12 Chemistry Coordination Compounds

    Optical isomers. All four ligands and Pt lie in one plane, and that molecular plane is a plane of symmetry. Every isomer is therefore superimposable on its mirror image.

    Answer: 3 geometrical isomers; none of them shows optical isomerism.

  13. 13

    Question 13

    Aqueous copper sulphate solution (blue in colour) gives:

    (i) a green precipitate with aqueous potassium fluoride and

    (ii) a bright green solution with aqueous potassium chloride.

    Explain these experimental results.

    Hard
    2 marks
    Solve with AI
    Written solution

    In aqueous copper sulphate, Cu2+\text{Cu}^{2+} is present as the aqua complex [Cu(H2O)4]2+[\text{Cu(H}_2\text{O)}_4]^{2+}, which absorbs red light (about 600 nm, NCERT Table 5.3) and so looks blue.

    Adding a solution of another ligand replaces the water ligands. A new ligand gives a different crystal field splitting, so a different wavelength is absorbed and a different colour is seen.

    (i) With KF: fluoride ions replace the water molecules to give the tetrafluoridocuprate(II) complex, which separates as a green precipitate:

    [Cu(H2O)4]2++4F−→[CuF4]2−+4H2O[\text{Cu(H}_2\text{O)}_4]^{2+} + 4\text{F}^- \rightarrow [\text{CuF}_4]^{2-} + 4\text{H}_2\text{O}

    (ii) With KCl: chloride ions replace the water molecules to give the tetrachloridocuprate(II) complex, which stays in solution and is bright green:

    [Cu(H2O)4]2++4Cl−→[CuCl4]2−+4H2O[\text{Cu(H}_2\text{O)}_4]^{2+} + 4\text{Cl}^- \rightarrow [\text{CuCl}_4]^{2-} + 4\text{H}_2\text{O}

    Class 12 Chemistry Coordination Compounds

    The colour change blue → green in both cases shows that the H2O\text{H}_2\text{O} ligands have been replaced by F−\text{F}^- or Cl−\text{Cl}^-, and the new ligands change the d-orbital splitting and hence the light absorbed.

  14. 14

    Question 14

    What is the coordination entity formed when excess of aqueous KCN is added to an aqueous solution of copper sulphate? Why is it that no precipitate of copper sulphide is obtained when H2S(g)\text{H}_2\text{S(g)} is passed through this solution?

    Hard
    2 marks
    Solve with AI
    Written solution

    Coordination entity formed: [Cu(CN)4]3−[\text{Cu(CN)}_4]^{3-}, the tetracyanidocuprate(I) ion (copper in the +1 state).

    How it forms. Cyanide first gives unstable copper(II) cyanide, which decomposes to copper(I) cyanide and cyanogen; the CuCN then dissolves in excess cyanide:

    2Cu2++4CN−→2Cu(CN)22\text{Cu}^{2+} + 4\text{CN}^- \rightarrow 2\text{Cu(CN)}_2

    2Cu(CN)2→2CuCN+(CN)2↑2\text{Cu(CN)}_2 \rightarrow 2\text{CuCN} + (\text{CN})_2\uparrow

    CuCN+3CN−→[Cu(CN)4]3−\text{CuCN} + 3\text{CN}^- \rightarrow [\text{Cu(CN)}_4]^{3-}

    Overall:

    2CuSO4+10KCN→2K3[Cu(CN)4]+2K2SO4+(CN)2↑2\text{CuSO}_4 + 10\text{KCN} \rightarrow 2\text{K}_3[\text{Cu(CN)}_4] + 2\text{K}_2\text{SO}_4 + (\text{CN})_2\uparrow

    Class 12 Chemistry Coordination Compounds

    Why H2S\text{H}_2\text{S} gives no precipitate. [Cu(CN)4]3−[\text{Cu(CN)}_4]^{3-} is a very stable complex; it does not dissociate appreciably, so the concentration of free copper ions in the solution is extremely small. The product of the copper ion and sulphide ion concentrations never reaches the solubility product of copper sulphide, so no copper sulphide precipitates.

  15. 15

    Question 15

    Discuss the nature of bonding in the following coordination entities on the basis of valence bond theory:

    (i) [Fe(CN)6]4−[\text{Fe(CN)}_6]^{4-}    (ii) [FeF6]3−[\text{FeF}_6]^{3-}    (iii) [Co(C2O4)3]3−[\text{Co(C}_2\text{O}_4)_3]^{3-}    (iv) [CoF6]3−[\text{CoF}_6]^{3-}

    Hard
    4 marks
    Solve with AI
    Written solution

    In VBT the metal ion uses a set of empty orbitals, hybridised to a definite geometry, to accept one electron pair from each ligand. A strong ligand makes the 3d electrons pair up so that two inner 3d orbitals are free (d2sp3d^2sp^3, inner orbital complex); a weak ligand leaves them unpaired and the metal uses outer 4d orbitals (sp3d2sp^3d^2, outer orbital complex).

    (i) [Fe(CN)6]4−[\text{Fe(CN)}_6]^{4-}: x+6(−1)=−4x + 6(-1) = -4, so Fe is +2, 3d63d^6. CN−\text{CN}^- is a strong ligand; the six 3d electrons pair up in three orbitals, leaving two 3d orbitals empty for d2sp3d^2sp^3 hybridisation.

    Class 12 Chemistry Coordination Compounds

    Octahedral, inner orbital (low spin), no unpaired electron: diamagnetic.

    (ii) [FeF6]3−[\text{FeF}_6]^{3-}: Fe is +3, 3d53d^5. F−\text{F}^- is a weak ligand; the five 3d electrons stay unpaired, so 4s, 4p and two 4d orbitals are used (sp3d2sp^3d^2).

    Class 12 Chemistry Coordination Compounds

    Octahedral, outer orbital (high spin), 5 unpaired electrons: strongly paramagnetic, μ=5×7=5.92 BM\mu = \sqrt{5 \times 7} = 5.92\ \text{BM}.

    (iii) [Co(C2O4)3]3−[\text{Co(C}_2\text{O}_4)_3]^{3-}: x+3(−2)=−3x + 3(-2) = -3, so Co is +3, 3d63d^6. With Co3+\text{Co}^{3+} the oxalate ligands cause pairing (the book notes this complex is diamagnetic), giving d2sp3d^2sp^3 hybridisation.

    Class 12 Chemistry Coordination Compounds

    Octahedral, inner orbital, diamagnetic.

    (iv) [CoF6]3−[\text{CoF}_6]^{3-}: Co is +3, 3d63d^6. F−\text{F}^- is weak; no pairing, so the outer 4d orbitals are used (sp3d2sp^3d^2).

    Class 12 Chemistry Coordination Compounds

    Octahedral, outer orbital (high spin), 4 unpaired electrons: paramagnetic, μ=4×6=4.90 BM\mu = \sqrt{4 \times 6} = 4.90\ \text{BM}.

    EntityMetal ionHybridisationTypeUnpaired e⁻Magnetic nature
    [Fe(CN)6]4−[\text{Fe(CN)}_6]^{4-}Fe2+\text{Fe}^{2+}, 3d63d^6d2sp3d^2sp^3inner orbital0diamagnetic
    [FeF6]3−[\text{FeF}_6]^{3-}Fe3+\text{Fe}^{3+}, 3d53d^5sp3d2sp^3d^2outer orbital5paramagnetic
    [Co(C2O4)3]3−[\text{Co(C}_2\text{O}_4)_3]^{3-}Co3+\text{Co}^{3+}, 3d63d^6d2sp3d^2sp^3inner orbital0diamagnetic
    [CoF6]3−[\text{CoF}_6]^{3-}Co3+\text{Co}^{3+}, 3d63d^6sp3d2sp^3d^2outer orbital4paramagnetic

    All four are octahedral.

  16. 16

    Question 16

    Draw figure to show the splitting of d orbitals in an octahedral crystal field.

    Medium
    3 marks
    Solve with AI
    Written solution

    In a free metal ion the five d orbitals have the same energy (they are degenerate). In an octahedral complex six ligands approach along the ±x\pm x, ±y\pm y and ±z\pm z axes.

    • dx2−y2d_{x^2-y^2} and dz2d_{z^2} point along the axes, directly at the ligands, so they are repelled more and are raised in energy: the ege_g set.
    • dxyd_{xy}, dyzd_{yz} and dxzd_{xz} point between the axes, so they are repelled less and are lowered in energy: the t2gt_{2g} set.

    Class 12 Chemistry Coordination Compounds

    The energy gap between the two sets is the crystal field splitting Δo\Delta_o. Relative to the average energy (barycentre), the two ege_g orbitals rise by 35Δo=0.6Δo\frac{3}{5}\Delta_o = 0.6\Delta_o and the three t2gt_{2g} orbitals fall by 25Δo=0.4Δo\frac{2}{5}\Delta_o = 0.4\Delta_o, so the total energy is unchanged:

    2(+0.6Δo)+3(−0.4Δo)=02(+0.6\Delta_o) + 3(-0.4\Delta_o) = 0

  17. 17

    Question 17

    What is spectrochemical series? Explain the difference between a weak field ligand and a strong field ligand.

    Medium
    3 marks
    Solve with AI
    Written solution

    Spectrochemical series: the arrangement of ligands in the order of increasing field strength, i.e. of the increasing crystal field splitting (Δo\Delta_o) they produce. It is an experimentally determined series, based on the light absorbed by complexes with different ligands. The NCERT series is:

    I−<Br−<SCN−<Cl−<S2−<F−<OH−<C2O42−<H2O<NCS−<edta4−<NH3<en<CN−<CO\text{I}^- < \text{Br}^- < \text{SCN}^- < \text{Cl}^- < \text{S}^{2-} < \text{F}^- < \text{OH}^- < \text{C}_2\text{O}_4^{2-} < \text{H}_2\text{O} < \text{NCS}^- < \text{edta}^{4-} < \text{NH}_3 < \text{en} < \text{CN}^- < \text{CO}

    Class 12 Chemistry Coordination Compounds

    Weak field versus strong field ligands. Whether the d electrons pair up depends on the splitting Δo\Delta_o compared with the pairing energy PP (the energy needed to put two electrons in one orbital):

    Weak field ligandStrong field ligand
    Splitting producedsmall, Δo<P\Delta_o < Plarge, Δo>P\Delta_o > P
    Electrons (e.g. d4d^4)enter ege_g before pairing: t2g3eg1t_{2g}^3 e_g^1pair in t2gt_{2g} first: t2g4eg0t_{2g}^4 e_g^0
    Complex formedhigh spinlow spin
    ExamplesI−\text{I}^-, Br−\text{Br}^-, Cl−\text{Cl}^-, F−\text{F}^-NH3\text{NH}_3, en, CN−\text{CN}^-, CO

    (With H2O\text{H}_2\text{O} and NH3\text{NH}_3 in the middle of the series, the outcome can also depend on the metal ion, e.g. NH3\text{NH}_3 gives low spin [Co(NH3)6]3+[\text{Co(NH}_3)_6]^{3+}.)

  18. 18

    Question 18

    What is crystal field splitting energy? How does the magnitude of Δo\Delta_o decide the actual configuration of d orbitals in a coordination entity?

    Medium
    3 marks
    Solve with AI
    Written solution

    Crystal field splitting energy. When ligands surround a metal ion, the repulsion between the ligand electrons and the metal d electrons lifts the degeneracy of the five d orbitals. The energy difference between the two resulting sets is the crystal field splitting energy. In an octahedral field it is Δo\Delta_o, the gap between the lower t2gt_{2g} set and the upper ege_g set.

    How Δo\Delta_o decides the configuration. For d1d^1, d2d^2 and d3d^3 ions the electrons simply occupy the t2gt_{2g} orbitals singly. For d4d^4 onwards there is a choice for the next electron: pair up in t2gt_{2g} (costing the pairing energy PP) or go up into ege_g (costing Δo\Delta_o). The electron takes the cheaper route.

    (i) Δo<P\Delta_o < P (weak field ligands): the fourth electron enters an ege_g orbital, giving t2g3eg1t_{2g}^3 e_g^1: a high spin complex.

    (ii) Δo>P\Delta_o > P (strong field ligands): the fourth electron pairs in t2gt_{2g}, giving t2g4eg0t_{2g}^4 e_g^0: a low spin complex.

    Class 12 Chemistry Coordination Compounds

    So a small Δo\Delta_o gives the maximum number of unpaired electrons, and a large Δo\Delta_o forces pairing in the lower set. The same argument decides the configurations of d5d^5, d6d^6 and d7d^7 ions.

  19. 19

    Question 19

    [Cr(NH3)6]3+[\text{Cr(NH}_3)_6]^{3+} is paramagnetic while [Ni(CN)4]2−[\text{Ni(CN)}_4]^{2-} is diamagnetic. Explain why.

    Hard
    4 marks
    Solve with AI
    Written solution

    [Cr(NH3)6]3+[\text{Cr(NH}_3)_6]^{3+}: paramagnetic

    Cr (Z = 24) is [Ar] 3d54s1[\text{Ar}]\,3d^5 4s^1, so Cr3+\text{Cr}^{3+} is 3d33d^3. The three electrons occupy three 3d orbitals singly; two 3d orbitals are already empty and are used, with 4s and three 4p orbitals, for d2sp3d^2sp^3 hybridisation (octahedral). The three unpaired electrons remain:

    μ=3(3+2)=15=3.87 BM\mu = \sqrt{3(3+2)} = \sqrt{15} = 3.87\ \text{BM}

    so the complex is paramagnetic.

    [Ni(CN)4]2−[\text{Ni(CN)}_4]^{2-}: diamagnetic

    Ni (Z = 28) is [Ar] 3d84s2[\text{Ar}]\,3d^8 4s^2, so Ni2+\text{Ni}^{2+} is 3d83d^8 with two unpaired electrons. CN−\text{CN}^- is a strong ligand: it makes these two electrons pair up, freeing one 3d orbital. That 3d orbital, the 4s and two 4p orbitals give dsp2dsp^2 hybridisation (square planar), each receiving an electron pair from a CN−\text{CN}^- ion. No unpaired electron is left, so the complex is diamagnetic.

    Class 12 Chemistry Coordination Compounds

  20. 20

    Question 20

    A solution of [Ni(H2O)6]2+[\text{Ni(H}_2\text{O)}_6]^{2+} is green but a solution of [Ni(CN)4]2−[\text{Ni(CN)}_4]^{2-} is colourless. Explain.

    Hard
    2 marks
    Solve with AI
    Written solution

    According to crystal field theory, colour arises from a d–d transition: a d electron absorbs visible light and jumps to a higher d level. The colour seen is the complementary colour of the light absorbed.

    [Ni(H2O)6]2+[\text{Ni(H}_2\text{O)}_6]^{2+} (green). Ni2+\text{Ni}^{2+} is 3d83d^8; in this octahedral complex it is t2g6eg2t_{2g}^6 e_g^2 with two unpaired electrons. H2O\text{H}_2\text{O} is a weak field ligand, so Δo\Delta_o is small and matches the energy of red light. The red light is absorbed, and the solution looks green, the complementary colour.

    [Ni(CN)4]2−[\text{Ni(CN)}_4]^{2-} (colourless). CN−\text{CN}^- is a very strong field ligand. The complex is square planar (dsp2dsp^2) with all eight d electrons paired in the four lower d orbitals, and the only empty d orbital, dx2−y2d_{x^2-y^2}, lies very far above them. No d–d transition occurs in the visible region, so no visible light is absorbed and the solution is colourless.

    Class 12 Chemistry Coordination Compounds

  21. 21

    Question 21

    [Fe(CN)6]4−[\text{Fe(CN)}_6]^{4-} and [Fe(H2O)6]2+[\text{Fe(H}_2\text{O)}_6]^{2+} are of different colours in dilute solutions. Why?

    Hard
    2 marks
    Solve with AI
    Written solution

    Both contain Fe2+\text{Fe}^{2+} (3d63d^6) in an octahedral field, so the difference lies in the ligand.

    • CN−\text{CN}^- is a strong field ligand: Δo\Delta_o is large, the electrons pair up (t2g6eg0t_{2g}^6 e_g^0, no unpaired electron), and the d–d transition needs high-energy (short wavelength) light.
    • H2O\text{H}_2\text{O} is a weak field ligand: Δo\Delta_o is small, the complex is high spin (t2g4eg2t_{2g}^4 e_g^2, four unpaired electrons), and the d–d transition needs low-energy (long wavelength) light.

    Class 12 Chemistry Coordination Compounds

    Because the two complexes absorb different wavelengths of visible light, the complementary colours transmitted are different: [Fe(H2O)6]2+[\text{Fe(H}_2\text{O)}_6]^{2+} is pale green and [Fe(CN)6]4−[\text{Fe(CN)}_6]^{4-} is pale yellow.

    The colour of a complex depends on the magnitude of Δo\Delta_o, and Δo\Delta_o depends on the ligand, so the same ion with different ligands shows different colours.

  22. 22

    Question 22

    Discuss the nature of bonding in metal carbonyls.

    Medium
    3 marks
    Solve with AI
    Written solution

    In metal carbonyls the metal–carbon bond has both σ and π character.

    1. σ bond (C → M). The lone pair on the carbon atom of CO is donated into a vacant orbital of the metal, forming a dative M←C σ bond.

    2. π bond (M → C, back-bonding). A pair of electrons from a filled d orbital of the metal is donated into the vacant antibonding π∗\pi^* orbital of CO, forming a M→C π bond.

    Class 12 Chemistry Coordination Compounds

    3. Synergic effect. The two donations reinforce each other: σ donation puts electron density on the metal, which makes the metal better able to back-donate into CO; back-donation removes electron density from the metal, which lets it accept more σ density. This synergic bonding strengthens the metal–carbon bond (and, because the π∗\pi^* orbital of CO is being filled, it weakens the C–O bond).

    Structures (NCERT): [Ni(CO)4][\text{Ni(CO)}_4] is tetrahedral, [Fe(CO)5][\text{Fe(CO)}_5] is trigonal bipyramidal, [Cr(CO)6][\text{Cr(CO)}_6] is octahedral; [Mn2(CO)10][\text{Mn}_2(\text{CO})_{10}] has two square pyramidal Mn(CO)5\text{Mn(CO)}_5 units joined by a Mn–Mn bond, and [Co2(CO)8][\text{Co}_2(\text{CO})_8] has a Co–Co bond bridged by two CO groups.

  23. 23

    Question 23

    Give the oxidation state, d orbital occupation and coordination number of the central metal ion in the following complexes:

    (i) K3[Co(C2O4)3]\text{K}_3[\text{Co(C}_2\text{O}_4)_3]    (ii) cis-[CrCl2(en)2]Cl[\text{CrCl}_2(\text{en})_2]\text{Cl}    (iii) (NH4)2[CoF4](\text{NH}_4)_2[\text{CoF}_4]    (iv) [Mn(H2O)6]SO4[\text{Mn(H}_2\text{O)}_6]\text{SO}_4

    Hard
    4 marks
  24. 24

    Question 24

    Write down the IUPAC name for each of the following complexes and indicate the oxidation state, electronic configuration and coordination number. Also give stereochemistry and magnetic moment of the complex:

    (i) K[Cr(H2O)2(C2O4)2]⋅3H2O\text{K}[\text{Cr(H}_2\text{O)}_2(\text{C}_2\text{O}_4)_2]\cdot 3\text{H}_2\text{O}    (ii) [Co(NH3)5Cl]Cl2[\text{Co(NH}_3)_5\text{Cl}]\text{Cl}_2    (iii) [CrCl3(py)3][\text{CrCl}_3(\text{py})_3]    (iv) Cs[FeCl4]\text{Cs}[\text{FeCl}_4]    (v) K4[Mn(CN)6]\text{K}_4[\text{Mn(CN)}_6]

    Hard
    5 marks
  25. 25

    Question 25

    Explain the violet colour of the complex [Ti(H2O)6]3+[\text{Ti(H}_2\text{O)}_6]^{3+} on the basis of crystal field theory.

    Hard
    3 marks
  26. 26

    Question 26

    What is meant by the chelate effect? Give an example.

    Medium
    2 marks
  27. 27

    Question 27

    Discuss briefly giving an example in each case the role of coordination compounds in:

    (i) biological systems    (ii) medicinal chemistry    (iii) analytical chemistry    (iv) extraction/metallurgy of metals.

    Medium
    4 marks
  28. 28

    Question 28

    How many ions are produced from the complex Co(NH3)6Cl2\text{Co(NH}_3)_6\text{Cl}_2 in solution?

    MCQMedium
    1 mark
  29. 29

    Question 29

    Amongst the following ions which one has the highest magnetic moment value?

    (i) [Cr(H2O)6]3+[\text{Cr(H}_2\text{O)}_6]^{3+}    (ii) [Fe(H2O)6]2+[\text{Fe(H}_2\text{O)}_6]^{2+}    (iii) [Zn(H2O)6]2+[\text{Zn(H}_2\text{O)}_6]^{2+}

    Medium
    2 marks
  30. 30

    Question 30

    Write the formulas for the following coordination compounds:

    (i) tetraamminediaquacobalt(III) chloride    (ii) potassium tetracyanidonickelate(II)    (iii) tris(ethane-1,2-diamine)chromium(III) chloride

    (iv) amminebromidochloridonitrito-N-platinate(II)    (v) dichloridobis(ethane-1,2-diamine)platinum(IV) nitrate    (vi) iron(III) hexacyanidoferrate(II)

    Medium
    3 marks
  31. 31

    Question 31

    Amongst the following, the most stable complex is

    MCQMedium
    1 mark
  32. 32

    Question 32

    What will be the correct order for the wavelengths of absorption in the visible region for the following:

    [Ni(NO2)6]4−[\text{Ni(NO}_2)_6]^{4-}, [Ni(NH3)6]2+[\text{Ni(NH}_3)_6]^{2+}, [Ni(H2O)6]2+[\text{Ni(H}_2\text{O)}_6]^{2+}?

    Hard
    2 marks
  33. 33

    Question 33

    Write the IUPAC names of the following coordination compounds:

    (i) [Co(NH3)6]Cl3[\text{Co(NH}_3)_6]\text{Cl}_3    (ii) [Co(NH3)5Cl]Cl2[\text{Co(NH}_3)_5\text{Cl}]\text{Cl}_2    (iii) K3[Fe(CN)6]\text{K}_3[\text{Fe(CN)}_6]

    (iv) K3[Fe(C2O4)3]\text{K}_3[\text{Fe(C}_2\text{O}_4)_3]    (v) K2[PdCl4]\text{K}_2[\text{PdCl}_4]    (vi) [Pt(NH3)2Cl(NH2CH3)]Cl[\text{Pt(NH}_3)_2\text{Cl(NH}_2\text{CH}_3)]\text{Cl}

    Medium
    3 marks
  34. 34

    Question 34

    Indicate the types of isomerism exhibited by the following complexes and draw the structures for these isomers:

    (i) K[Cr(H2O)2(C2O4)2]\text{K}[\text{Cr(H}_2\text{O)}_2(\text{C}_2\text{O}_4)_2]    (ii) [Co(en)3]Cl3[\text{Co(en)}_3]\text{Cl}_3    (iii) [Co(NH3)5(NO2)](NO3)2[\text{Co(NH}_3)_5(\text{NO}_2)](\text{NO}_3)_2    (iv) [Pt(NH3)(H2O)Cl2][\text{Pt(NH}_3)(\text{H}_2\text{O})\text{Cl}_2]

    Medium
    3 marks
  35. 35

    Question 35

    Give evidence that [Co(NH3)5Cl]SO4[\text{Co(NH}_3)_5\text{Cl}]\text{SO}_4 and [Co(NH3)5(SO4)]Cl[\text{Co(NH}_3)_5(\text{SO}_4)]\text{Cl} are ionisation isomers.

    Medium
    2 marks
  36. 36

    Question 36

    Explain on the basis of valence bond theory that [Ni(CN)4]2−[\text{Ni(CN)}_4]^{2-} ion with square planar structure is diamagnetic and the [NiCl4]2−[\text{NiCl}_4]^{2-} ion with tetrahedral geometry is paramagnetic.

    Medium
    3 marks
  37. 37

    Question 37

    [NiCl4]2−[\text{NiCl}_4]^{2-} is paramagnetic while [Ni(CO)4][\text{Ni(CO)}_4] is diamagnetic though both are tetrahedral. Why?

    Medium
    2 marks
  38. 38

    Question 38

    [Fe(H2O)6]3+[\text{Fe(H}_2\text{O)}_6]^{3+} is strongly paramagnetic whereas [Fe(CN)6]3−[\text{Fe(CN)}_6]^{3-} is weakly paramagnetic. Explain.

    Medium
    2 marks
  39. 39

    Question 39

    Explain [Co(NH3)6]3+[\text{Co(NH}_3)_6]^{3+} is an inner orbital complex whereas [Ni(NH3)6]2+[\text{Ni(NH}_3)_6]^{2+} is an outer orbital complex.

    Medium
    2 marks
  40. 40

    Question 40

    Predict the number of unpaired electrons in the square planar [Pt(CN)4]2−[\text{Pt(CN)}_4]^{2-} ion.

    Medium
    2 marks
  41. 41

    Question 41

    The hexaquo manganese(II) ion contains five unpaired electrons, while the hexacyanoion contains only one unpaired electron. Explain using Crystal Field Theory.

    Medium
    2 marks
Inside Ch 5

What Class 12 Chemistry Ch 5 covers

The sections of the chapter, in the order the book takes them. Every question above comes from one of these.

  1. 01Types of Salts
  2. 02Types Of Ligands
  3. 03Nomenclature Of Co-ordination Compound
  4. 04Isomerism In Co-ordination Compounds
  5. 05Theories Of Co-ordination Compounds
  6. 06Metal Carbonyls
From the board papers

Ch 5 in past CBSE papers

The same chapter as the board has actually asked it. These are worded differently from the textbook exercise, which is the point of reading them.

  1. 1

    Board paper question 1

    The oxidation state of Ni in [Ni(CO)4][\text{Ni(CO)}_4] is:

    MCQMediumAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) 0

      Correct
    • (B) +2

    • (C) +3

    • (D) +4

    Option (A) is correct.

    Explanation: The oxidation number of the central atom is the charge it would carry if every ligand were removed together with the electron pairs it shares with the metal.

    • CO is a neutral ligand, so each CO contributes 0.
    • [Ni(CO)4][\text{Ni(CO)}_4] carries no overall charge.

    Let the oxidation state of Ni be xx:

    x+4(0)=0⇒x=0x + 4(0) = 0 \quad\Rightarrow\quad x = 0

    So Ni is in the zero oxidation state. This is typical of metal carbonyls: [Fe(CO)5][\text{Fe(CO)}_5] and [Cr(CO)6][\text{Cr(CO)}_6] also have the metal in the 0 state.

    Why the other options are wrong: +2, +3 and +4 would each need the ligands to carry a total charge of −2-2, −3-3 or −4-4 for a neutral molecule. Four neutral CO ligands carry no charge.

  2. 2

    Board paper question 2

    Which of the following will give a white precipitate upon reacting with AgNO3\text{AgNO}_3?

    MCQHardAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) K2[Pt(en)2Cl2]\text{K}_2[\text{Pt(en)}_2\text{Cl}_2]

    • (B) [Co(NH3)3Cl3][\text{Co(NH}_3)_3\text{Cl}_3]

    • (C) [Cr(H2O)6]Cl3[\text{Cr(H}_2\text{O)}_6]\text{Cl}_3

      Correct
    • (D) [Fe(H2O)3Cl3][\text{Fe(H}_2\text{O)}_3\text{Cl}_3]

    Option (C) is correct.

    Explanation: AgNO3\text{AgNO}_3 precipitates white AgCl only from chloride ions that are free in solution, that is, chloride ions written outside the square brackets. Chloride ions bonded to the metal inside the coordination sphere are held by coordinate bonds and do not ionise.

    In [Cr(H2O)6]Cl3[\text{Cr(H}_2\text{O)}_6]\text{Cl}_3 all three chlorides are counter ions:

    [Cr(H2O)6]Cl3→[Cr(H2O)6]3++3Cl−[\text{Cr(H}_2\text{O)}_6]\text{Cl}_3 \rightarrow [\text{Cr(H}_2\text{O)}_6]^{3+} + 3\text{Cl}^-

    3Cl−+3AgNO3→3AgCl↓ (white)+3NO3−3\text{Cl}^- + 3\text{AgNO}_3 \rightarrow 3\text{AgCl}\downarrow\ (\text{white}) + 3\text{NO}_3^-

    So one mole of the complex gives three moles of white AgCl.

    Why the other options are wrong:

    • (A) Both chlorides are inside the coordination sphere; the ions outside are K+\text{K}^+, which do not react with Ag+\text{Ag}^+.
    • (B) [Co(NH3)3Cl3][\text{Co(NH}_3)_3\text{Cl}_3] is a neutral complex with all three Cl bonded to Co. It gives no free Cl−\text{Cl}^-.
    • (D) [Fe(H2O)3Cl3][\text{Fe(H}_2\text{O)}_3\text{Cl}_3] is also a neutral complex with every Cl inside the sphere, so no AgCl forms.
  3. 3

    Board paper question 3

    The formula of the complex triamminetris(nitrito-O)cobalt(III) is:

    MCQMediumAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) [Co(NO2)3(NH3)3][\text{Co(NO}_2)_3(\text{NH}_3)_3]

    • (B) [Co(ONO2)3(NH3)][\text{Co(ONO}_2)_3(\text{NH}_3)]

    • (C) [Co(NO2)(NH3)3][\text{Co(NO}_2)(\text{NH}_3)_3]

    • (D) [Co(ONO)3(NH3)3][\text{Co(ONO)}_3(\text{NH}_3)_3]

      Correct

    Option (D) is correct.

    Explanation: Read the name part by part.

    • triammine = three NH3\text{NH}_3 ligands.
    • tris(nitrito-O) = three NO2−\text{NO}_2^- ligands, each bonded to the metal through oxygen. The O-bonded form is written ONO in a formula.
    • cobalt(III) = Co in the +3+3 state.

    Charge check: (+3)+3(−1)+3(0)=0(+3) + 3(-1) + 3(0) = 0, so the complex is neutral and needs no counter ion. The formula is [Co(ONO)3(NH3)3][\text{Co(ONO)}_3(\text{NH}_3)_3].

    Why the other options are wrong:

    • (A) NO2\text{NO}_2 written first means N-bonded ligands, which are named nitrito-N. That formula is the linkage isomer of the correct answer.
    • (B) ONO2\text{ONO}_2 is nitrate, not nitrite, and there is only one NH3\text{NH}_3.
    • (C) It has only one nitrite ligand (N-bonded), so the charge would be +2+2, not 0, and the name would need "nitrito-N".
  4. 4

    Board paper question 4

    How many ions are produced from the complex [Co(NH3)5Cl]Cl2[\text{Co(NH}_3)_5\text{Cl}]\text{Cl}_2 in solution?

    MCQMediumAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) 4

    • (B) 2

    • (C) 3

      Correct
    • (D) 5

    Option (C) is correct.

    Explanation: Only the part outside the square brackets ionises. The complex ion stays together as one unit, because the five NH3\text{NH}_3 and one Cl\text{Cl} are held to Co by coordinate bonds.

    [Co(NH3)5Cl]Cl2→[Co(NH3)5Cl]2++2Cl−[\text{Co(NH}_3)_5\text{Cl}]\text{Cl}_2 \rightarrow [\text{Co(NH}_3)_5\text{Cl}]^{2+} + 2\text{Cl}^-

    Ions formed: 1 complex cation + 2 chloride ions = 3 ions. It is a 1:2 electrolyte, and Werner used exactly this kind of conductivity result (and the 2 mol of AgCl it gives with AgNO3\text{AgNO}_3) to fix its formula.

    Why the other options are wrong:

    • (A) 4 ions would need all three chlorides to be free, as in [Co(NH3)6]Cl3[\text{Co(NH}_3)_6]\text{Cl}_3.
    • (B) 2 ions would need only one free chloride, as in [Co(NH3)4Cl2]Cl[\text{Co(NH}_3)_4\text{Cl}_2]\text{Cl}.
    • (D) 5 would mean the coordinated Cl also ionised and the complex broke up, which does not happen.
  5. 5

    Board paper question 5

    The pair [Co(NH3)4Cl2]Br2[\text{Co(NH}_3)_4\text{Cl}_2]\text{Br}_2 and [Co(NH3)4Br2]Cl2[\text{Co(NH}_3)_4\text{Br}_2]\text{Cl}_2 will show:

    MCQMediumAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) Linkage isomerism

    • (B) Hydrate isomerism

    • (C) Ionisation isomerism

      Correct
    • (D) Coordination isomerism

    Option (C) is correct.

    Explanation: Ionisation isomers have the same formula but exchange an ion inside the coordination sphere with an ion outside it. They therefore give different ions in solution.

    [Co(NH3)4Cl2]Br2→[Co(NH3)4Cl2]2++2Br−[\text{Co(NH}_3)_4\text{Cl}_2]\text{Br}_2 \rightarrow [\text{Co(NH}_3)_4\text{Cl}_2]^{2+} + 2\text{Br}^-

    [Co(NH3)4Br2]Cl2→[Co(NH3)4Br2]2++2Cl−[\text{Co(NH}_3)_4\text{Br}_2]\text{Cl}_2 \rightarrow [\text{Co(NH}_3)_4\text{Br}_2]^{2+} + 2\text{Cl}^-

    The first gives a pale yellow AgBr precipitate with AgNO3\text{AgNO}_3; the second gives a white AgCl precipitate. Chloride and bromide have simply swapped places.

    Why the other options are wrong:

    • (A) Linkage isomerism needs an ambidentate ligand such as NO2−\text{NO}_2^- or SCN−\text{SCN}^-. Neither Cl−\text{Cl}^- nor Br−\text{Br}^- is ambidentate.
    • (B) Hydrate (solvate) isomerism needs water to move between the sphere and the lattice. There is no water here.
    • (D) Coordination isomerism needs both cation and anion to be complex ions, as in [Co(NH3)6][Cr(CN)6][\text{Co(NH}_3)_6][\text{Cr(CN)}_6].
  6. 6

    Board paper question 6

    The oxidation state of Fe in [Fe(CO)5][\text{Fe(CO)}_5] is:

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) +2

    • (B) 0

      Correct
    • (C) +3

    • (D) +5

    Option (B) is correct.

    Explanation: Carbon monoxide is a neutral ligand, and [Fe(CO)5][\text{Fe(CO)}_5] is a neutral molecule. Let the oxidation state of Fe be xx:

    x+5(0)=0⇒x=0x + 5(0) = 0 \quad\Rightarrow\quad x = 0

    So iron is in the zero oxidation state. [Fe(CO)5][\text{Fe(CO)}_5] is a trigonal bipyramidal metal carbonyl, held together by σ-donation from CO to Fe and π-back-donation from filled Fe dd orbitals to CO.

    Why the other options are wrong: +2, +3 and +5 would need the five ligands to carry a total negative charge of 2, 3 or 5 for the molecule to stay neutral. CO carries no charge. (+5 is also the number of ligands, a common mix-up with the coordination number.)

All 37 board paper questions for this chapter, solved the same way.

Common questions

Class 12 Chemistry Ch 5 questions students ask

How many questions are there in Class 12 Chemistry Ch 5?

41 questions. Every one is solved step by step on this page.

Are these Class 12 Chemistry solutions free?

Yes. Every question and its full working is free to read, with no account needed.

Can I download the Class 12 Chemistry Ch 5 solutions as a PDF?

There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.