Materials involved
- Negative plate: a grid of lead (Pb); after use it is coated with lead sulphate (PbSO4).
- Positive plate: a grid packed with lead dioxide (PbO2); after use it is also coated with PbSO4.
- Electrolyte: sulphuric acid (about 38%), which becomes dilute during use.
- An external d.c. source (charger or the car's alternator). Its negative terminal goes to the Pb plate and its positive terminal to the PbO2 plate.
During use (discharge) the battery works as a galvanic cell:
Pb(s)+PbO2(s)+2H2SO4(aq)→2PbSO4(s)+2H2O(l)
During recharging the battery works as an electrolytic cell, and the external source drives this reaction backwards.

At the Pb plate (now the cathode), lead sulphate is reduced back to lead:
PbSO4(s)+2e−→Pb(s)+SO42−(aq)
At the PbO2 plate (now the anode), lead sulphate is oxidised back to lead dioxide:
PbSO4(s)+2H2O(l)→PbO2(s)+SO42−(aq)+4H+(aq)+2e−
Overall:
2PbSO4(s)+2H2O(l)→Pb(s)+PbO2(s)+2H2SO4(aq)
PbSO4 is used up and H2SO4 is regenerated, so the density of the acid rises again. This is why a hydrometer reading tells how fully the battery is charged.