Opening your dashboard
Class 12 Chemistry Chapter 2: Electrochemistry Solutions
33 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 2, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
33 questions with solutions
2–5 marks · Mixed difficulty
The first 17 solutions are on this page. This chapter is a long one, so the rest open on their own page to keep this one quick to load.
- 12 marks
Question 1
Arrange the following metals in the order in which they displace each other from the solution of their salts.
Al, Cu, Fe, Mg and Zn.
Solve with AIWritten solution
Idea: A metal displaces another metal from a solution of its salt only if it is a stronger reducing agent, i.e. it has a lower (more negative) standard electrode potential. It then gives its electrons to the ions of the other metal.
Standard electrode potentials (NCERT data):
Couple / V 
Check with one pair: zinc placed in copper sulphate solution
is positive, so is negative and zinc displaces copper. The same holds for every metal against any metal above it on the scale.
Order (each metal displaces all those after it):
So Mg displaces Al, Zn, Fe and Cu; Al displaces Zn, Fe and Cu; Zn displaces Fe and Cu; Fe displaces only Cu; Cu displaces none of them.
- 22 marks
Question 2
Given the standard electrode potentials,
, , , ,
Arrange these metals in their increasing order of reducing power.
Solve with AIWritten solution
Reducing power of a metal is its tendency to lose electrons (get oxidised) and so reduce something else.
A standard electrode potential is a reduction potential. The lower (more negative) of is, the less the ion wants to be reduced, and therefore the more readily the metal gives up electrons. So:
Arrange by , from highest to lowest:
Metal Ag Hg Cr Mg K / V 
Increasing order of reducing power:
Silver (highest ) is the weakest reducing agent and potassium (lowest ) is the strongest. Ag and Hg differ by only 0.01 V, so their reducing powers are very close.
- 33 marks
Question 3
Depict the galvanic cell in which the reaction takes place. Further show:
(i) Which of the electrode is negatively charged?
(ii) The carriers of the current in the cell.
(iii) Individual reaction at each electrode.
Solve with AIWritten solution
In the reaction zinc is oxidised () and silver ions are reduced (). The oxidation half-cell is the anode and is written on the left; the reduction half-cell is the cathode and is written on the right, with a salt bridge () between them:

(i) Negatively charged electrode
The zinc electrode (anode) is negative. Zinc atoms leave as ions and the electrons they release stay on the zinc rod, so electrons build up there.
(ii) Carriers of the current
- In the external circuit (wire): electrons, flowing from Zn to Ag. (Conventional current flows the opposite way, from Ag to Zn.)
- Inside the solutions and the salt bridge: ions. Cations move towards the cathode (Ag side) and anions move towards the anode (Zn side). In the salt bridge, for example and from carry the current and keep both solutions electrically neutral.
(iii) Reaction at each electrode
At the anode (oxidation):
At the cathode (reduction):
Adding them, with the silver equation doubled so that the electrons cancel, gives back the cell reaction .
- 45 marks
Question 4
Calculate the standard cell potentials of galvanic cell in which the following reactions take place:
(i)
(ii)
Calculate the and equilibrium constant of the reactions.
Solve with AIWritten solution
Relations used (at 298 K):
with , , so .

(i)
Cr is oxidised (anode): , V.
is reduced (cathode): , V.
Electrons transferred: 2 Cr atoms each lose 3 electrons, so (the same 6 electrons are gained by 3 ions).
(ii)
is oxidised (anode): , V.
is reduced (cathode): , V.
Summary
Reaction (i) Cr / Cd 0.34 V 6 kJ mol (ii) Fe / Ag 0.03 V 1 kJ mol 3.2 Reaction (i) goes practically to completion; reaction (ii), with a very small , reaches an equilibrium in which reactants and products are both present in comparable amounts.
- 55 marks
Question 5
Write the Nernst equation and emf of the following cells at 298 K:
(i)
(ii)
(iii)
(iv)
Solve with AIWritten solution
Method for every cell: left electrode = anode (oxidation), right electrode = cathode (reduction). Write the overall reaction, find , then use the Nernst equation at 298 K:
where has products over reactants; pure solids and liquids are taken as 1 and a gas at 1 bar also contributes 1.
(i) Mg | Cu cell
Reaction: ,
(ii) Fe | H cell
Reaction: ,
(iii) Sn | H cell
Reaction: ,
(iv) Br | Br ‖ H | H cell
Anode (left, oxidation):
Cathode (right, reduction):
Reaction: ,
The negative emf means the cell as written is not spontaneous. The spontaneous reaction is the reverse, : in a real cell the bromine electrode would be the cathode (+) and the hydrogen electrode the anode (−).

Answers: (i) 2.67 V; (ii) 0.53 V; (iii) 0.08 V; (iv) V.
- 63 marks
Question 6
In the button cells widely used in watches and other devices the following reaction takes place:
Determine and for the reaction.
(Use and .)
Solve with AIWritten solution
Split the reaction into half-reactions
Anode (oxidation of zinc):
Cathode (reduction of silver oxide):
So .

Standard emf
Standard Gibbs energy
The large negative shows the reaction is strongly spontaneous, which is why this small cell can drive a watch for a long time.
Answer: V and ( kJ mol).
- 73 marks
Question 7
Define conductivity and molar conductivity for the solution of an electrolyte. Discuss their variation with concentration.
Solve with AIWritten solution
Conductivity ()
Conductivity is the reciprocal of resistivity. It is the conductance of a solution of unit volume: a cube of solution of 1 cm side (or 1 m side in SI) placed between two electrodes of unit area kept unit distance apart.
Unit: S cm (SI: S m; ).
Molar conductivity ()
Molar conductivity is the conductance of the volume of solution that contains one mole of the electrolyte, kept between two electrodes a unit distance apart and with an area large enough to hold that whole volume.
Variation with concentration

1. Conductivity decreases on dilution (for both strong and weak electrolytes). On dilution the number of ions per unit volume that carry current falls, so the unit cube of solution conducts less. For KCl, drops from 0.1113 S cm at 1.000 M to 0.00141 S cm at 0.010 M.
2. Molar conductivity increases on dilution. , where is the volume that contains one mole of electrolyte. On dilution grows more than falls, so rises. For KCl, rises from 111.3 to 141.0 S cm mol over the same range. The limiting value as is the limiting molar conductivity, .
- Strong electrolytes (KCl, NaCl) are already fully dissociated, so rises only slowly, as the ions get farther apart and drag on each other less. It follows
A plot of against is a straight line at low concentration; its intercept gives (150.0 S cm mol for KCl) and its slope is .
- Weak electrolytes (acetic acid) are only slightly dissociated. On dilution the degree of dissociation increases, so the number of ions from one mole rises sharply and increases steeply, especially at very low concentration. The curve cannot be extrapolated to find ; it is obtained from Kohlrausch's law instead (390.5 S cm mol for acetic acid).
- 82 marks
Question 8
The conductivity of 0.20 M solution of KCl at 298 K is 0.0248 S cm. Calculate its molar conductivity.
Solve with AIWritten solution
Given: , .
Formula: with in S cm and in mol L,
The factor 1000 converts litres to cm (), so is the volume in cm that contains one mole of KCl.

Substitute:
This fits the KCl values in NCERT Table 2.3: 129.0 at 0.100 M and 111.3 at 1.000 M, so at 0.20 M a value in between is expected.
- 92 marks
Question 9
The resistance of a conductivity cell containing 0.001M KCl solution at 298 K is 1500 Ω. What is the cell constant if conductivity of 0.001M KCl solution at 298 K is S cm.
Solve with AIWritten solution
Cell constant is the ratio of the distance between the electrodes to their area, . It depends only on the geometry of the cell, so it is found once with a KCl solution of accurately known conductivity and then used for other solutions.
Since ,

Given: , .
(Units: , because .)
- 105 marks
Question 10
The conductivity of sodium chloride at 298 K has been determined at different concentrations and the results are given below:
Concentration / M 0.001 0.010 0.020 0.050 0.100 / S m 1.237 11.85 23.15 55.53 106.74 Calculate for all concentrations and draw a plot between and . Find the value of .
Solve with AIWritten solution
Step 1: read the table correctly
The row gives , so itself is the tabulated number S m. To work in S cm, use . For 0.001 M:
Step 2: molar conductivity
For 0.001 M:
The other concentrations are worked the same way:
/ mol L / (mol L) / S cm / S cm mol 0.001 0.0316 123.7 0.010 0.1000 118.5 0.020 0.1414 115.8 0.050 0.2236 111.1 0.100 0.3162 106.7 Step 3: plot against

NaCl is a strong electrolyte, so the points lie close to a straight line obeying
Step 4: extrapolate to
The best straight line through the five points meets the axis () at
and its slope gives .
A line drawn by hand through these points gives an intercept of about 124 to 125 S cm mol. As a check, the value must be a little above 123.7, the already reached at 0.001 M.
- 113 marks
Question 11
Conductivity of 0.00241 M acetic acid is S cm. Calculate its molar conductivity. If for acetic acid is 390.5 S cm mol, what is its dissociation constant?
Solve with AIWritten solution
Step 1: molar conductivity
Step 2: degree of dissociation
For a weak electrolyte, the fraction that has dissociated is the ratio of its molar conductivity to the value it would have if fully dissociated:

Step 3: dissociation constant
At equilibrium the concentrations are , and , so
This agrees with the value mol L found in NCERT Example 2.9 for a different concentration of acetic acid. does not depend on concentration, even though does.
- 123 marks
Question 12
How much charge is required for the following reductions:
(i) 1 mol of to Al?
(ii) 1 mol of to Cu?
(iii) 1 mol of to ?
Solve with AIWritten solution
Principle (Faraday): the charge on one mole of electrons is 1 faraday, C. The charge needed is (moles of electrons in the half-equation) × F.
(i) to Al
(ii) to Cu
(iii) to
The oxidation state of Mn falls from +7 to +2, so each ion gains 5 electrons:

- 133 marks
Question 13
How much electricity in terms of Faraday is required to produce
(i) 20.0 g of Ca from molten ?
(ii) 40.0 g of Al from molten ?
Solve with AIWritten solution
Method: mass of metal → moles of metal → moles of electrons (= number of faradays), using the electrode reaction.

(i) Calcium from molten
(ii) Aluminium from molten
The salts are used molten, not in water: in aqueous solution water is reduced to in preference to or , so these reactive metals can only be obtained by electrolysis of their melts.
- 143 marks
Question 14
How much electricity is required in coulomb for the oxidation of
(i) 1 mol of to ?
(ii) 1 mol of FeO to ?
Solve with AIWritten solution
Principle: charge = (moles of electrons lost) × F, with .
(i) to
Oxygen goes from (in water) to (in ), so each loses 2 electrons:
4 mol of electrons for 2 mol of water, i.e. 2 mol of electrons per mol of .
(ii) FeO to
Iron goes from (in FeO) to (in ), so each FeO loses 1 electron:
1 mol of electrons per mol of FeO.

- 152 marks
Question 15
A solution of is electrolysed between platinum electrodes using a current of 5 amperes for 20 minutes. What mass of Ni is deposited at the cathode?
Solve with AIWritten solution
Electrode reactions
Cathode: (so 2 mol of electrons deposit 1 mol, 58.7 g, of Ni)
Anode (inert Pt): water is oxidised,

Step 1: charge passed
Step 2: moles of electrons
Step 3: mass of nickel
In one line: .
- 165 marks
Question 16
Three electrolytic cells A, B, C containing solutions of , and , respectively are connected in series. A steady current of 1.5 amperes was passed through them until 1.45 g of silver deposited at the cathode of cell B. How long did the current flow? What mass of copper and zinc were deposited?
Solve with AIWritten solution
Key idea: in a series circuit the same current flows through every cell for the same time, so the same quantity of charge passes through A, B and C.

Step 1: charge from the silver deposited (cell B)
Step 2: time
Step 3: copper (cell C) and zinc (cell A)
Both ions need 2 electrons per atom: and . So each deposits mol of metal.
Shortcut (Faraday's second law): for the same charge, masses deposited are in the ratio of the equivalent masses ():
(Zinc does deposit here even though is negative: in solution hydrogen evolution on zinc is very slow, which is why zinc is refined and electroplated from aqueous solution.)
- 175 marks
Question 17
Using the standard electrode potentials given in Table 2.1, predict if the reaction between the following is feasible:
(i) and
(ii) and
(iii) and
(iv) and
(v) and .
Solve with AIWritten solution
Rule: write the reaction, treat the species that gains electrons as the cathode couple and the one that loses electrons as the anode couple, and find
If then and the reaction is feasible; if it is not feasible.
Values from Table 2.1: 1.09 V; 0.80 V; 0.77 V; 0.54 V; 0.34 V.

(i) and
Feasible: oxidises iodide to iodine.
(ii) and Cu
Feasible: copper displaces silver (a copper wire in solution grows silver crystals and the solution turns blue).
(iii) and
Not feasible: is too weak an oxidant to oxidise bromide.
(iv) Ag and
Not feasible under standard conditions, i.e. it does not go to completion. Because is only slightly negative, , so when no or is present at the start an appreciable amount of is still reduced until equilibrium is reached.
(v) and
Feasible: bromine oxidises to . This is exactly the reverse of (iii), which is why one is feasible and the other is not.
Summary: feasible: (i), (ii), (v); not feasible: (iii), (iv).
- 185 marks
Question 18
Predict the products of electrolysis in each of the following:
(i) An aqueous solution of with silver electrodes.
(ii) An aqueous solution of with platinum electrodes.
(iii) A dilute solution of with platinum electrodes.
(iv) An aqueous solution of with platinum electrodes.
- 192 marks
Question 19
How would you determine the standard electrode potential of the system ?
- 202 marks
Question 20
Can you store copper sulphate solutions in a zinc pot?
- 212 marks
Question 21
Consult the table of standard electrode potentials and suggest three substances that can oxidise ferrous ions under suitable conditions.
- 222 marks
Question 22
Calculate the potential of hydrogen electrode in contact with a solution whose pH is 10.
- 233 marks
Question 23
Calculate the emf of the cell in which the following reaction takes place:
Given that V.
- 243 marks
Question 24
The cell in which the following reaction occurs:
has V at 298 K. Calculate the standard Gibbs energy and the equilibrium constant of the cell reaction.
- 252 marks
Question 25
Why does the conductivity of a solution decrease with dilution?
- 262 marks
Question 26
Suggest a way to determine the value of water.
- 273 marks
Question 27
The molar conductivity of 0.025 mol L methanoic acid is 46.1 S cm mol. Calculate its degree of dissociation and dissociation constant. Given S cm mol and S cm mol.
- 282 marks
Question 28
If a current of 0.5 ampere flows through a metallic wire for 2 hours, then how many electrons would flow through the wire?
- 292 marks
Question 29
Suggest a list of metals that are extracted electrolytically.
- 302 marks
Question 30
Consider the reaction:
What is the quantity of electricity in coulombs needed to reduce 1 mol of ?
- 313 marks
Question 31
Write the chemistry of recharging the lead storage battery, highlighting all the materials that are involved during recharging.
- 322 marks
Question 32
Suggest two materials other than hydrogen that can be used as fuels in fuel cells.
- 333 marks
Question 33
Explain how rusting of iron is envisaged as setting up of an electrochemical cell.
What Class 12 Chemistry Ch 2 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01Electrochemical Cell
- 02Electrode Potential
- 03Electrochemical Series
- 04Nernst Equation
- 05Electrolytical Cell And Electrolysis
- 06Conductance of Electrolytic Solutions
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 2 before.
- Competency-Based Questions (CBQ)The applied, case-study format that carries half the marks in a CBSE paper.80questionsOpen
- Previous Year QuestionsQuestions that have actually appeared in board papers, each tagged with its year.37questionsOpen
- Practice QuestionsExtra questions per chapter, for when one attempt at a method is not enough.30questionsOpen
Ch 2 in past CBSE papers
The same chapter as the board has actually asked it. These are worded differently from the textbook exercise, which is the point of reading them.
- 11 mark
Board paper question 1
The Debye–Hückel–Onsager equation for strong electrolytes is:
Which of the following equalities holds?
Solve with AIAnswer
(A)
(B) as
- Correct
(C) as
(D) as
Option (C) is correct.
Explanation: In , the term measures how much the interionic attractions pull the molar conductivity down. As the solution is diluted, , so and
This is why (written in NCERT) is called the limiting molar conductivity — the value at infinite dilution. On a plot of against it is the intercept of the straight line, and the slope is .

- (A) is wrong: the equation has , not (that form would make blow up at low concentration).
- (B) is wrong: as increases, increases and falls further below .
- (D) is wrong: at , , not .
- 21 mark
Board paper question 2
Which of the following will be the limiting molar conductivity of if the limiting molar conductivity of is 91 ? The limiting molar conductivities of some individual ions are given in the following table.
S. No. Ion Limiting molar conductivity (S cm² mol⁻¹) 1 H⁺ 349.6 2 Na⁺ 50.1 3 K⁺ 73.5 4 OH⁻ 199.1 Solve with AIAnswer
(A) 350
(B) 375.3
- Correct
(C) 390.5
(D) 340.4
Option (C) is correct.
Explanation: By Kohlrausch's law of independent migration of ions, the limiting molar conductivity of an electrolyte is the sum of the limiting molar conductivities of its ions.
Step 1 — find of the acetate ion from sodium acetate:
Step 2 — add the hydrogen ion:

- (A) 350 is roughly alone — the acetate contribution has been left out.
- (D) 340.4 — has been subtracted a second time.
- (B) 375.3 does not follow from any correct combination of the data. and are not needed at all.
- 31 mark
Board paper question 3
The molar conductivity of at infinite dilution is . Using the graph and the given information, the molar conductivity of at infinite dilution will be:
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Explanation: HCl and KCl are strong electrolytes, so their vs plots are straight lines. Extrapolating each line to (the intercept on the y-axis) gives the limiting molar conductivity:
By Kohlrausch's law, combine the three electrolytes so that the unwanted ions cancel:
Check the ions: .

(With NCERT's exact values, — the same answer within the accuracy of reading a graph.)
- (C) 150 is of KCl itself — the acetate/H swap has been ignored.
- (A) 100 and (D) 125 do not follow from the intercepts on the graph.
- 41 mark
Board paper question 4
What is the molar conductance at infinite dilution of sodium chloride if the molar conductances at infinite dilution of and ions are and respectively?
Solve with AIAnswer
- Correct
(A)
(B)
(C)
(D)
Option (A) is correct.
Explanation: By Kohlrausch's law, NaCl gives one and one , so
Convert the unit: , so
- (B) 22.42 is the difference ; conductivities of ions add, they do not subtract.
- (C) 198.20 counts twice.
- (D) 175.78 counts twice.
- 51 mark
Board paper question 5
Which of the following solutions will have the highest conductivity at 298 K?
Solve with AIAnswer
(A) 0.01 M HCl solution
- Correct
(B) 0.1 M HCl solution
(C) 0.01 M solution
(D) 0.1 M solution
Option (B) is correct.
Explanation: Conductivity () is the conductance of 1 cm³ of solution, so it depends on the number of ions per unit volume (and on how fast they move).
- HCl is a strong electrolyte — it is completely ionised into and . is a weak electrolyte — only a small fraction (about 1% at 0.1 M) is ionised. So at the same concentration HCl has far more ions.
- For the same electrolyte, the more concentrated solution has more ions per unit volume, so 0.1 M HCl has about ten times as many ions per cm³ as 0.01 M HCl.

So 0.1 M HCl has the most ions per unit volume, and the highly mobile ion adds to it — it has the highest conductivity.
- (A) 0.01 M HCl is fully ionised but has only one-tenth the ions per cm³.
- (C) and (D): acetic acid is only weakly ionised, so even 0.1 M acetic acid has far fewer ions than 0.01 M HCl.
- 61 mark
Board paper question 6
The unit of molar conductivity is:
Solve with AIAnswer
(A)
(B)
(C)
- Correct
(D)
Option (D) is correct.
Explanation: Molar conductivity is the conductivity divided by the concentration:
With in and in :
In practice is in , so the working formula is , which still gives . The SI unit is ().
- (A) has instead of .
- (B) has in the numerator; dividing by concentration puts .
- (C) uses (that is ohm), which belongs to resistance, not conductance.
All 37 board paper questions for this chapter, solved the same way.
Class 12 Chemistry Ch 2 questions students ask
How many questions are there in Class 12 Chemistry Ch 2?
33 questions. Every one is solved step by step on this page.
Are these Class 12 Chemistry solutions free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 12 Chemistry Ch 2 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
