Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. 8.11. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires.

Confirming your payment
Mechanical Properties Of Solids · Question 5 of 16
Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. 8.11. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires.

Tension in each wire. The brass wire holds only the 6.0 kg mass. The steel wire holds the 4.0 kg mass and everything hanging below it (brass wire and 6.0 kg mass; the wires are light). With :

Cross-sectional area (same for both wires):
Moduli: (Table 8.1). Brass is not listed in Table 8.1; we take .
The elongation is .
Steel wire ():
Brass wire ():
Elongation of the steel wire ; elongation of the brass wire .