Opening your dashboard
Class 11 Physics Chapter 6: System Of Particles And Rotational Motion Solutions
17 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 6, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
17 questions with solutions
2–5 marks · Medium difficulty
- 14 marks
Question 1
Give the location of the centre of mass of a (i) sphere, (ii) cylinder, (iii) ring, and (iv) cube, each of uniform mass density. Does the centre of mass of a body necessarily lie inside the body?
Solve with AIWritten solution
For a body of uniform mass density, the centre of mass lies at its geometric centre. Each of these bodies is symmetric about its geometric centre: for every small element of mass at position from the centre there is an equal element at , so in
the contributions cancel in pairs and , i.e. the centre of mass is at that centre.
(i) Sphere: at the centre of the sphere.
(ii) Cylinder: at the midpoint of its axis, i.e. the centre of the cylinder, halfway between the two flat faces.
(iii) Ring: at the centre of the ring (the centre of the circle).
(iv) Cube: at the centre of the cube, the point where its four body diagonals intersect.
Does the centre of mass necessarily lie inside the body? No. The centre of mass is a point defined by how the mass is distributed; it need not coincide with any material point of the body. For a uniform ring, the centre of mass is at the centre of the ring, where there is no mass at all. Similar examples are a hollow sphere, a bangle, and a boomerang or an L-shaped frame, whose centres of mass lie outside the material of the body.
- 24 marks
Question 2
In the HCl molecule, the separation between the nuclei of the two atoms is about 1.27 Å (1 Å = m). Find the approximate location of the CM of the molecule, given that a chlorine atom is about 35.5 times as massive as a hydrogen atom and nearly all the mass of an atom is concentrated in its nucleus.
Solve with AIWritten solution
Since nearly all the mass of each atom is in its nucleus, treat the molecule as two point masses separated by .
Take the hydrogen nucleus as the origin and the line H → Cl as the -axis.
- Hydrogen: mass , position
- Chlorine: mass , position
The centre of mass lies on the line joining the two nuclei, at

The centre of mass of the HCl molecule lies on the line joining the two nuclei, about 1.24 Å from the hydrogen nucleus, i.e. only about from the chlorine nucleus. It is very close to the chlorine nucleus because chlorine is much heavier.
- 32 marks
Question 3
A child sits stationary at one end of a long trolley moving uniformly with a speed on a smooth horizontal floor. If the child gets up and runs about on the trolley in any manner, what is the speed of the CM of the (trolley + child) system?
Solve with AIWritten solution
Take the child and the trolley together as one system.
- When the child runs about, the forces between the child and the trolley (friction between feet and floor of the trolley) are internal forces. They occur in action–reaction pairs and cancel for the system as a whole.
- The only external forces are the weights and the normal reaction of the floor, which are vertical. The floor is smooth, so there is no horizontal external force.
For a system of particles,
With no horizontal external force, the horizontal acceleration of the centre of mass is zero, so the total linear momentum of the system, and hence the velocity of its centre of mass, stays constant.
Initially the child and the trolley both move with speed , so the centre of mass moves with speed . Therefore, however the child runs about, the speed of the CM of the (trolley + child) system remains (unchanged). The trolley's own speed changes as the child runs, but the CM of the system is unaffected.
- 43 marks
Question 4
Show that the area of the triangle contained between the vectors a and b is one half of the magnitude of a × b.
Solve with AIWritten solution
Let be represented by and by , with . The triangle contained between the two vectors is . Complete the parallelogram and draw , as shown in the figure.

Height of the triangle. In the right-angled triangle ,
Area of the triangle. Taking as the base,
Magnitude of the vector product. By definition,
Comparing the two results,
Hence the area of the triangle contained between and is one half of the magnitude of . (Equivalently, is the area of the whole parallelogram , and the diagonal divides it into two equal triangles.)
- 53 marks
Question 5
Show that a·(b × c) is equal in magnitude to the volume of the parallelepiped formed on the three vectors a, b and c.
Solve with AIWritten solution
Let the parallelepiped be formed on the three vectors , and , with the parallelogram formed by and as its base.

Step 1: the base. The vector is perpendicular to the plane of and (the base), and its magnitude is the area of the base parallelogram:
where is the angle between and . Let be the unit vector along , so .
Step 2: the height. Let be the angle between and . The height of the parallelepiped is the component of perpendicular to the base:
Step 3: the triple product.
Taking the magnitude,
Hence is equal in magnitude to the volume of the parallelepiped formed on , and . The product is positive when lies on the same side of the base as () and negative when it lies on the other side; that is why only its magnitude equals the volume.
- 64 marks
Question 6
Find the components along the , , axes of the angular momentum l of a particle, whose position vector is r with components , , and momentum is p with components , and . Show that if the particle moves only in the - plane the angular momentum has only a -component.
Solve with AIWritten solution
The angular momentum of a particle about the origin is
with
Writing the vector product as a determinant,
Comparing with , the components are
Particle moving only in the - plane. Such a particle always has , and since it never leaves the plane its velocity, and hence its momentum, has no -component: . Substituting,
So : the angular momentum has only a -component, i.e. it is perpendicular to the plane of motion, as expected since and both lie in the - plane.
- 73 marks
Question 7
Two particles, each of mass and speed , travel in opposite directions along parallel lines separated by a distance . Show that the angular momentum vector of the two particle system is the same whatever be the point about which the angular momentum is taken.
Solve with AIWritten solution
Let particle 1 move with velocity and particle 2 with velocity along two parallel lines a distance apart. Take any point O, and let and be the position vectors of the two particles from O at some instant.

Angular momentum about O.
This does not depend on O. The vector is the vector drawn from particle 2 to particle 1. If the reference point is moved to another point O′, displaced by from O, both position vectors change to and , but their difference is unchanged:
So is the same about every point.
Its magnitude and direction. Resolve into a part parallel to and a part perpendicular to it. The parallel part gives zero vector product with ; the perpendicular part has length equal to the separation of the two lines. Hence
and is perpendicular to the plane containing the two lines. (Its direction is fixed by the right-hand rule; for the arrangement in the figure it points out of the page.)
Therefore the angular momentum of the two-particle system is , perpendicular to the plane of motion, whatever be the point about which it is taken (it also stays the same as the particles move, since the perpendicular separation stays ).
- 84 marks
Question 8
A non-uniform bar of weight is suspended at rest by two strings of negligible weight as shown in the figure. The angles made by the strings with the vertical are 36.9° and 53.1° respectively. The bar is 2 m long. Calculate the distance of the centre of gravity of the bar from its left end.
Solve with AIWritten solution
Let the tensions in the left and right strings be and , with and measured from the vertical. The weight acts at the centre of gravity G, a distance from the left end A. The bar is horizontal and m.
These angles are those of a 3-4-5 triangle:

Horizontal equilibrium (the horizontal components of the tensions balance):
Vertical equilibrium:
Rotational equilibrium (moments about the left end A). passes through A and the horizontal component of acts along the bar, so neither has a moment about A. The vertical component of acts 2 m from A:
The centre of gravity of the bar is 0.72 m from its left end.
- 93 marks
Question 9
A car weighs 1800 kg. The distance between its front and back axles is 1.8 m. Its centre of gravity is 1.05 m behind the front axle. Determine the force exerted by the level ground on each front wheel and each back wheel.
Solve with AIWritten solution
Take (as in the NCERT answer).
Weight of the car: , acting at the centre of gravity G.
Let be the total upward force of the ground on the two front wheels and that on the two back wheels. G is 1.05 m behind the front axle, so it is m in front of the back axle.

The car is in equilibrium, so the net force and the net torque on it are zero.
Moments about the front axle:
Moments about the back axle:
Check: , so the net vertical force is zero.
Assuming the load on each axle is shared equally by its two wheels:
The ground exerts 3675 N on each front wheel and 5145 N on each back wheel. The back wheels carry more load because the centre of gravity is nearer the back axle.
- 103 marks
Question 10
Torques of equal magnitude are applied to a hollow cylinder and a solid sphere, both having the same mass and radius. The cylinder is free to rotate about its standard axis of symmetry, and the sphere is free to rotate about an axis passing through its centre. Which of the two will acquire a greater angular speed after a given time?
Solve with AIWritten solution
Let both bodies have mass and radius . From Table 6.1, the moments of inertia about the given axes are
The same torque acts on each, and , so
Starting from rest, the angular speed after time is , so after the same time
The solid sphere acquires the greater angular speed, 2.5 times that of the hollow cylinder. Its mass lies closer to the axis, so its moment of inertia is smaller and the same torque gives it a larger angular acceleration.
- 113 marks
Question 11
A solid cylinder of mass 20 kg rotates about its axis with angular speed 100 rad . The radius of the cylinder is 0.25 m. What is the kinetic energy associated with the rotation of the cylinder? What is the magnitude of angular momentum of the cylinder about its axis?
Solve with AIWritten solution
Given: , , .
Moment of inertia of a solid cylinder about its axis (Table 6.1):
Kinetic energy of rotation:
The kinetic energy of rotation is 3125 J.
Angular momentum about the axis:
Since , the magnitude of the angular momentum is 62.5 J s.
- 125 marks
Question 12
(a) A child stands at the centre of a turntable with his two arms outstretched. The turntable is set rotating with an angular speed of 40 rev/min. How much is the angular speed of the child if he folds his hands back and thereby reduces his moment of inertia to 2/5 times the initial value? Assume that the turntable rotates without friction.
(b) Show that the child's new kinetic energy of rotation is more than the initial kinetic energy of rotation. How do you account for this increase in kinetic energy?
Solve with AIWritten solution
(a) Let the initial moment of inertia (child + turntable) be and the initial angular speed . After the child folds his hands,
The turntable rotates without friction, so there is no external torque about the axis and the angular momentum is conserved:
The new angular speed is 100 rev/min.
(b) Kinetic energy of rotation is . The ratio of the final to the initial kinetic energy is
So the new kinetic energy of rotation is 2.5 times the initial kinetic energy; it has increased. (Equivalently, since is constant, , and reducing to multiplies by .)
Source of the increase: angular momentum is conserved, but kinetic energy is not. To fold his arms, the child must pull his arms inward with a force larger than that needed just to keep them moving in their circles; this inward force acts through an inward displacement, so his muscles do work. This work comes from the child's internal (muscular, chemical) energy, and it appears as the extra kinetic energy of rotation.
- 132 marks
Question 13
A rope of negligible mass is wound round a hollow cylinder of mass 3 kg and radius 40 cm. What is the angular acceleration of the cylinder if the rope is pulled with a force of 30 N? What is the linear acceleration of the rope? Assume that there is no slipping.
Solve with AIWritten solution
Given: , , . The cylinder turns about its own axis.

Moment of inertia of a hollow cylinder about its axis:
Torque of the pull about the axis (the rope leaves the cylinder tangentially, so the lever arm is ):
Angular acceleration:
Linear acceleration of the rope. With no slipping, the rope moves with the rim of the cylinder, so
The angular acceleration of the cylinder is 25 rad s⁻² and the linear acceleration of the rope is 10 m s⁻².
- 142 marks
Question 14
To maintain a rotor at a uniform angular speed of 200 rad , an engine needs to transmit a torque of 180 N m. What is the power required by the engine? (Note: uniform angular velocity in the absence of friction implies zero torque. In practice, applied torque is needed to counter frictional torque). Assume that the engine is 100% efficient.
Solve with AIWritten solution
Given: , .
For rotation about a fixed axis, the work done by a torque in turning through is , so the power is
The engine must supply a power of 36 kW.
At uniform angular speed there is no angular acceleration, so the net torque on the rotor is zero: the 180 N m transmitted by the engine is exactly balanced by the frictional torque. All 36 kW is therefore used up against friction (as heat), and none of it increases the kinetic energy of the rotor. Since the engine is 100% efficient, this is also the power the engine requires.
- 154 marks
Question 15
From a uniform disk of radius , a circular hole of radius is cut out. The centre of the hole is at from the centre of the original disc. Locate the centre of gravity of the resulting flat body.
Solve with AIWritten solution
Let O be the centre of the original disc and O₁ the centre of the hole, with . Take O as the origin and the line as the -axis, so O₁ is at . Let be the mass per unit area of the disc.
Masses:
Centre of mass of the remaining body. The whole disc is the remaining body plus the cut-out part, so
(This is the same as treating the hole as a negative mass at added to the full disc.)

In a uniform gravitational field the centre of gravity coincides with the centre of mass. Hence the centre of gravity O₂ of the remaining flat body is at a distance from the centre O of the original disc, on the side opposite to the hole (on the line produced beyond O).
- 163 marks
Question 16
A metre stick is balanced on a knife edge at its centre. When two coins, each of mass 5 g are put one on top of the other at the 12.0 cm mark, the stick is found to be balanced at 45.0 cm. What is the mass of the metre stick?
Solve with AIWritten solution
Where the stick's weight acts. The stick balances on its own at the 50 cm mark, so its centre of gravity is at the 50.0 cm mark. Let its mass be ; its weight acts there.
The two coins have a total mass of and act at the 12.0 cm mark. With the coins on, the stick balances on the knife edge at the 45.0 cm mark.

Lever arms about the knife edge (45.0 cm mark):
- coins: (on one side)
- stick's weight: (on the other side)
Principle of moments (the reaction at the knife edge has no moment about it):
The mass of the metre stick is 66 g.
Check: the knife edge must then push up with , which balances the total weight, so the net force on the stick is also zero.
- 175 marks
Question 17
The oxygen molecule has a mass of kg and a moment of inertia of about an axis through its centre perpendicular to the lines joining the two atoms. Suppose the mean speed of such a molecule in a gas is 500 m/s and that its kinetic energy of rotation is two thirds of its kinetic energy of translation. Find the average angular velocity of the molecule.
Solve with AIWritten solution
Given: , , .
The molecule rotates about an axis through its centre, perpendicular to the line joining the two atoms.

Condition given:
Substituting:
The average angular velocity of the molecule is rad s⁻¹. (The bond length is not needed: the moment of inertia is given directly.)
What Class 11 Physics Ch 6 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01Centre Of Mass
- 02Linear Momentum
- 03Vector Product Of Two Vectors
- 04Angular Velocity
- 05Torque
- 06Equilibrium Of A Rigid Body
- 07Moment Of Inertia
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 6 before.
Class 11 Physics Ch 6 questions students ask
How many questions are there in Class 11 Physics Ch 6?
17 questions. Every one is solved step by step on this page.
Are these Class 11 Physics solutions free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 11 Physics Ch 6 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
