Opening your dashboard
Class 11 Chemistry Chapter 9: Organic Chemistry-Some Basic Concepts Solutions
40 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 9, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
40 questions with solutions
1–6 marks · Mixed difficulty
- 15 marks
Question 1
What are the hybridisation states of each carbon atom in the following compounds?
CH₂=C=O, CH₃CH=CH₂, (CH₃)₂CO, CH₂=CHCN, C₆H₆
Solve with AIWritten solution
Rule used: a carbon with four σ bonds (only single bonds) is sp³; a carbon with one double bond (three σ + one π) is sp²; a carbon with a triple bond or two double bonds (two σ + two π) is sp.
(i) CH₂=C=O (ketene)

C-1 (CH₂=, one double bond): sp². C-2 (=C=, two double bonds): sp.
(ii) CH₃CH=CH₂ (propene)

C-1 (CH₃, single bonds only): sp³. C-2 and C-3 (the C=C carbons): sp².
(iii) (CH₃)₂CO (propanone)

C-1 and C-3 (CH₃ groups): sp³. C-2 (C=O carbon): sp².
(iv) CH₂=CHCN (propenenitrile)

C-1 and C-2 (the C=C carbons): sp². C-3 (the C≡N carbon): sp.
(v) C₆H₆ (benzene)

All six carbon atoms are sp² hybridised; each forms three σ bonds (two C–C, one C–H) and its unhybridised p orbital takes part in the delocalised π system.
- 26 marks
Question 2
Indicate the σ and π bonds in the following molecules:
C₆H₆, C₆H₁₂, CH₂Cl₂, CH₂=C=CH₂, CH₃NO₂, HCONHCH₃
Solve with AIWritten solution
Every single bond is one σ bond; a double bond is one σ + one π; a triple bond is one σ + two π.
(i) C₆H₆ (benzene)

σ bonds: 6 C–C + 6 C–H = 12. π bonds: 3 C=C (delocalised over the ring).
(ii) C₆H₁₂ (cyclohexane)

σ bonds: 6 C–C + 12 C–H = 18. π bonds: none.
(iii) CH₂Cl₂ (dichloromethane)

σ bonds: 2 C–H + 2 C–Cl = 4. π bonds: none.
(iv) CH₂=C=CH₂ (propadiene)

σ bonds: 2 C–C + 4 C–H = 6. π bonds: 2 (one in each C=C).
(v) CH₃NO₂ (nitromethane)

σ bonds: 3 C–H + 1 C–N + 2 N–O = 6. π bonds: 1 (in the N=O bond; the π electrons are delocalised over both N–O bonds by resonance).
(vi) HCONHCH₃ (N-methylmethanamide)

σ bonds: 4 C–H (1 on the carbonyl carbon + 3 in CH₃) + 2 C–N + 1 N–H + 1 C–O = 8. π bonds: 1 (in C=O).
- 33 marks
Question 3
Write bond-line formulas for: Isopropyl alcohol, 2,3-Dimethylbutanal, Heptan-4-one.
Solve with AIWritten solution
In a bond-line formula, each line end and each bend is a carbon atom carrying enough hydrogens to make four bonds; only heteroatoms and the H of –CHO are written.
(i) Isopropyl alcohol (propan-2-ol), (CH₃)₂CHOH

(ii) 2,3-Dimethylbutanal, (CH₃)₂CH–CH(CH₃)–CHO
The –CHO carbon is C-1; methyl groups sit on C-2 and C-3 of the four-carbon chain.

(iii) Heptan-4-one, CH₃CH₂CH₂COCH₂CH₂CH₃
A seven-carbon chain with the C=O at the middle carbon (C-4).

- 46 marks
Question 4
Give the IUPAC names of the following compounds:
Solve with AIWritten solution
(a) Propylbenzene. A straight three-carbon chain attached to a benzene ring; benzene is the parent, propyl the substituent.
(b) 3-Methylpentanenitrile. The carbon of –C≡N is C-1 and is included in the chain: NC–CH₂–CH(CH₃)–CH₂–CH₃ gives a five-carbon chain with a methyl group on C-3.
(c) 2,5-Dimethylheptane. The longest chain has seven carbons; numbering from the end nearer the first branch gives locants 2,5 (the other direction gives 3,6).
(d) 3-Bromo-3-chloroheptane. Both halogens are on C-3 of a seven-carbon chain (numbering from the ethyl end); prefixes are written in alphabetical order, bromo before chloro.
(e) 3-Chloropropanal. The –CHO carbon is C-1, so Cl is on C-3: Cl–CH₂–CH₂–CHO.
(f) 2,2-Dichloroethanol. In Cl₂CHCH₂OH the carbon bearing –OH is C-1, so both chlorine atoms are on C-2.
- 54 marks
Question 5
Which of the following represents the correct IUPAC name for the compounds concerned?
(a) 2,2-Dimethylpentane or 2-Dimethylpentane
(b) 2,4,7-Trimethyloctane or 2,5,7-Trimethyloctane
(c) 2-Chloro-4-methylpentane or 4-Chloro-2-methylpentane
(d) But-3-yn-1-ol or But-4-ol-1-yne
Solve with AIWritten solution
(a) 2,2-Dimethylpentane. Each of the two methyl groups needs its own locant, so "di" must be accompanied by two numbers; "2-Dimethyl" is incomplete.
(b) 2,4,7-Trimethyloctane. By the lowest-locant rule the two sets are compared term by term at the first point of difference: (2,4,7) has 4 where (2,5,7) has 5, so 2,4,7 is lower.
(c) 2-Chloro-4-methylpentane. Both directions of numbering give the locant set (2,4); when there is a tie, the lower number goes to the substituent that comes first in alphabetical order, so chloro gets 2.
(d) But-3-yn-1-ol. –OH is the principal functional group and is written as the suffix -ol with the lowest possible number (C-1); the triple bond then falls at C-3 and is shown by "-3-yn-". "But-4-ol-1-yne" wrongly gives the triple bond priority over –OH.
- 63 marks
Question 6
Draw formulas for the first five members of each homologous series beginning with the following compounds:
(a) H–COOH
(b) CH₃COCH₃
(c) H–CH=CH₂
Solve with AIWritten solution
Successive members of a homologous series differ by one –CH₂– unit.
(a) Carboxylic acids (–COOH)
- HCOOH — methanoic acid
- CH₃COOH — ethanoic acid
- CH₃CH₂COOH — propanoic acid
- CH₃CH₂CH₂COOH — butanoic acid
- CH₃CH₂CH₂CH₂COOH — pentanoic acid
(b) Ketones (C=O within the chain)
- CH₃COCH₃ — propanone
- CH₃COCH₂CH₃ — butanone
- CH₃COCH₂CH₂CH₃ — pentan-2-one
- CH₃COCH₂CH₂CH₂CH₃ — hexan-2-one
- CH₃COCH₂CH₂CH₂CH₂CH₃ — heptan-2-one
(c) Alkenes (C=C)
- CH₂=CH₂ — ethene
- CH₃CH=CH₂ — propene
- CH₃CH₂CH=CH₂ — but-1-ene
- CH₃CH₂CH₂CH=CH₂ — pent-1-ene
- CH₃CH₂CH₂CH₂CH=CH₂ — hex-1-ene
- 76 marks
Question 7
Give condensed and bond-line structural formulas and identify the functional group(s) present, if any, for:
(a) 2,2,4-Trimethylpentane
(b) 2-Hydroxy-1,2,3-propanetricarboxylic acid
(c) Hexanedial
Solve with AIWritten solution
(a) 2,2,4-Trimethylpentane
Condensed formula: (CH₃)₃C–CH₂–CH(CH₃)₂
Bond-line formula:

Functional group: none (it is an alkane).
(b) 2-Hydroxy-1,2,3-propanetricarboxylic acid (citric acid)
Condensed formula: HOOC–CH₂–C(OH)(COOH)–CH₂–COOH
Bond-line formula:

Functional groups: three carboxylic acid groups (–COOH) and one alcoholic hydroxyl group (–OH, on a tertiary carbon).
(c) Hexanedial
Condensed formula: OHC–(CH₂)₄–CHO
Bond-line formula:

Functional group: two aldehyde groups (–CHO), one at each end of the six-carbon chain.
- 85 marks
Question 8
Identify the functional groups in the following compounds:
Solve with AIWritten solution
(a) Aldehyde (–CHO), hydroxyl attached to the benzene ring (phenolic –OH) and methoxy ether (–OCH₃, written OMe).
(b) Primary aromatic amino group (–NH₂), ester (–COO–) and tertiary amino group (–N(C₂H₅)₂).
(c) Carbon–carbon double bond (C=C) and nitro group (–NO₂).

- 92 marks
Question 9
Which of the two: O₂NCH₂CH₂O⁻ or CH₃CH₂O⁻ is expected to be more stable and why?
Solve with AIWritten solution
O₂NCH₂CH₂O⁻ is more stable.
The nitro group is strongly electron-withdrawing and exerts a −I effect. It pulls electron density through the σ bonds of the chain away from the negatively charged oxygen, so the negative charge is dispersed and the ion is stabilised.
In CH₃CH₂O⁻ the ethyl group is electron-releasing (+I effect). It pushes electron density towards the oxygen, which intensifies the negative charge and makes the ion less stable.
Dispersal of charge stabilises an ion; intensification of charge destabilises it. Hence O₂NCH₂CH₂O⁻ > CH₃CH₂O⁻ in stability.
- 102 marks
Question 10
Explain why alkyl groups act as electron donors when attached to a π system.
Solve with AIWritten solution
Alkyl groups donate electrons to an attached π system mainly by hyperconjugation.
The σ electrons of a C–H bond on the carbon directly attached to the π system (the α-carbon) can overlap with the adjacent unsaturated p orbitals of the π system. This partial delocalisation of σ electrons into the π system is called hyperconjugation (σ–π conjugation, or "no-bond resonance"). It increases the electron density of the π system, so the alkyl group behaves as an electron donor.
For propene, hyperconjugation is shown by the following structures, in which the C–H bond electrons appear in the π system:

The orbital picture shows the overlap of the C–H σ bond with the π orbital:

The greater the number of α-hydrogens, the greater the electron donation. In addition, an sp³ alkyl carbon is less electronegative than an sp² carbon, so a small +I effect also pushes electrons towards the π system.
- 116 marks
Question 11
Draw the resonance structures for the following compounds. Show the electron shift using curved-arrow notation.
(a) C₆H₅OH
(b) C₆H₅NO₂
(c) CH₃CH=CHCHO
(d) C₆H₅–CHO
(e) C₆H₅–CH₂⁺
(f) CH₃CH=CHCH₂⁺
Solve with AIWritten solution
(a) C₆H₅OH (phenol)

A lone pair on oxygen is delocalised into the ring (+R effect), placing negative charge at the two ortho positions and the para position:

(b) C₆H₅NO₂ (nitrobenzene)

The nitro group withdraws π electrons from the ring (−R effect). The C–N bond becomes a C=N⁺ double bond and positive charge appears at the two ortho positions and the para position:

(c) CH₃CH=CHCHO (but-2-enal)

The C=C π electrons shift towards the C=O group and the C=O π electrons move onto oxygen:

(d) C₆H₅–CHO (benzaldehyde)

The –CHO group withdraws π electrons from the ring (−R effect); the ring–carbonyl bond becomes a C=C double bond and positive charge appears at the two ortho positions and the para position:

(e) C₆H₅–CH₂⁺ (benzyl carbocation)

The positive charge is delocalised from the CH₂ carbon onto the two ortho carbons and the para carbon of the ring, which is why the benzyl cation is unusually stable:

(f) CH₃CH=CHCH₂⁺ (but-2-enyl, an allylic carbocation)

Numbering the chain from the CH₂⁺ end (C-1), the C₂=C₃ π electrons shift towards C-1, forming a C₁=C₂ double bond and moving the positive charge from C-1 to C-3:

- 124 marks
Question 12
What are electrophiles and nucleophiles? Explain with examples.
Solve with AIWritten solution
Nucleophile ("nucleus-seeking"): a reagent that brings an electron pair and donates it to an electron-deficient centre of the substrate. Nucleophiles are electron-rich: they are negatively charged ions or neutral molecules with a lone pair.
Examples: OH⁻, CN⁻, Cl⁻, CH₃O⁻ (anionic); H₂O, NH₃, R–NH₂, R–OH (neutral, with lone pairs).
Electrophile ("electron-seeking"): a reagent that takes away an electron pair from an electron-rich centre of the substrate. Electrophiles are electron-deficient: they are positively charged ions or neutral species with a vacant orbital or an electron-deficient atom.
Examples: H⁺, NO₂⁺, CH₃⁺ and other carbocations (cationic); BF₃, AlCl₃, and the carbon atom of a carbonyl group, >C=O (neutral).
In a polar reaction, the nucleophile attacks the electrophilic centre and supplies the electron pair for the new bond, e.g. OH⁻ attacking the δ+ carbon of CH₃–Br.
- 133 marks
Question 13
Identify the reagents shown in bold in the following equations as nucleophiles or electrophiles:
(a) CH₃COOH + HO⁻ → CH₃COO⁻ + H₂O
(b) CH₃COCH₃ + ⁻CN → (CH₃)₂C(CN)(OH)
(c) C₆H₆ + CH₃C⁺O → C₆H₅COCH₃
Solve with AIWritten solution
(a) HO⁻: nucleophile. It is an electron-rich anion with lone pairs and donates an electron pair to the acidic hydrogen of the –COOH group.
(b) ⁻CN: nucleophile. It donates its electron pair to the electron-deficient (δ+) carbonyl carbon of propanone, forming a new C–C bond.
(c) CH₃C⁺O (acylium ion): electrophile. Its carbon carries a positive charge and accepts an electron pair from the π electrons of the benzene ring.
- 144 marks
Question 14
Classify the following reactions in one of the reaction types studied in this unit.
(a) CH₃CH₂Br + HS⁻ → CH₃CH₂SH + Br⁻
(b) (CH₃)₂C=CH₂ + HCl → (CH₃)₂CCl–CH₃
(c) CH₃CH₂Br + HO⁻ → CH₂=CH₂ + H₂O + Br⁻
(d) (CH₃)₃C–CH₂OH + HBr → (CH₃)₂CBrCH₂CH₃ + H₂O
Solve with AIWritten solution
(a) Nucleophilic substitution. The nucleophile HS⁻ replaces Br⁻ on the ethyl carbon.
(b) Electrophilic addition. H⁺ (electrophile) adds to the C=C to give the more stable tertiary carbocation (CH₃)₃C⁺, which then combines with Cl⁻ (Markovnikov addition).
(c) Elimination (β-elimination, dehydrohalogenation). HO⁻ removes a β-hydrogen and Br⁻ leaves from the adjacent carbon, forming a C=C bond.
(d) Nucleophilic substitution with rearrangement. –OH is replaced by –Br, but the carbon skeleton changes: the primary carbocation (CH₃)₃C–CH₂⁺ rearranges by a 1,2-methyl shift to the more stable tertiary carbocation (CH₃)₂C⁺–CH₂CH₃, which is then attacked by Br⁻.
The product is written as (CH₃)₂CBrCH₂CH₃ (2-bromo-2-methylbutane, C₅) rather than the printed (CH₃)₂CBrCH₂CH₂CH₃, because the C₅ alcohol cannot give a C₆ product; the extra CH₂ in the book is a misprint.
- 153 marks
Question 15
What is the relationship between the members of following pairs of structures? Are they structural or geometrical isomers or resonance contributors?
Solve with AIWritten solution
(a) Structural isomers (position isomers). Both are C₅H₁₀O ketones; the first is pentan-3-one and the second is pentan-2-one. They differ only in the position of the C=O group.
(b) Geometrical isomers. Both are CHD=CHD with the same connectivity. In the first, the two D atoms are on opposite sides of the C=C (trans); in the second they are on the same side (cis). Restricted rotation about the double bond makes these two distinct compounds.
(c) Resonance contributors. The two structures have the same positions of all atoms and differ only in the placement of electrons (a π bond in one, a positive charge on carbon in the other). They are canonical forms of the same species, protonated methanoic acid, whose real structure is the resonance hybrid; they are not isomers.
- 164 marks
Question 16
For the following bond cleavages, use curved-arrows to show the electron flow and classify each as homolysis or heterolysis. Identify reactive intermediate produced as free radical, carbocation and carbanion.
Solve with AIWritten solution
(a) The O–O bond breaks so that each oxygen takes one electron of the shared pair (two half-headed, fish-hook arrows):

Type: homolysis. Intermediate: free radicals (two methoxy radicals, CH₃Ȯ).
(b) OH⁻ removes a proton from a methyl group of propanone; the C–H bonding pair stays on carbon:

Type: heterolysis. Intermediate: carbanion (⁻CH₂COCH₃, stabilised by the adjacent C=O group).
(c) The C–Br bond breaks with both electrons going to bromine:

Type: heterolysis. Intermediate: carbocation ((CH₃)₃C⁺, the tert-butyl cation).
(d) A π electron pair of benzene is used to form a bond to E⁺, leaving a positive charge on the ring:

Type: heterolysis (both electrons of the π bond go to one side). Intermediate: carbocation (the arenium ion, whose positive charge is delocalised over the ring).
- 175 marks
Question 17
Explain the terms Inductive and Electromeric effects. Which electron displacement effect explains the following correct orders of acidity of the carboxylic acids?
(a) Cl₃CCOOH > Cl₂CHCOOH > ClCH₂COOH
(b) CH₃CH₂COOH > (CH₃)₂CHCOOH > (CH₃)₃C.COOH
Solve with AIWritten solution
Inductive effect: the permanent polarisation of a σ bond, caused by a difference in electronegativity, that is transmitted along a carbon chain and weakens rapidly with distance (it is negligible beyond about three bonds). Groups that withdraw electrons (–Cl, –NO₂, –CN, –COOH) show a −I effect; groups that release electrons (alkyl groups) show a +I effect.
Electromeric effect: a temporary effect in which the π electrons of a multiple bond are completely transferred to one of the two bonded atoms when an attacking reagent approaches; it disappears when the reagent is removed. If the π electrons move to the atom to which the reagent becomes attached, it is a +E effect; if they move to the atom to which the reagent does not attach, it is a −E effect.
Acid strength depends on the stability of the carboxylate ion RCOO⁻: groups that disperse its negative charge increase acidity; groups that intensify it decrease acidity.
(a) −I effect of chlorine. Each Cl withdraws electron density and disperses the negative charge of the carboxylate ion. Three Cl atoms withdraw more than two, and two more than one, so acidity falls in the order Cl₃CCOOH > Cl₂CHCOOH > ClCH₂COOH.
(b) +I effect of alkyl groups. Methyl groups release electrons and intensify the negative charge of the carboxylate ion. The number of methyl groups on the α-carbon rises from one (CH₃CH₂–) to two ((CH₃)₂CH–) to three ((CH₃)₃C–), so acidity falls in the order CH₃CH₂COOH > (CH₃)₂CHCOOH > (CH₃)₃C.COOH.
- 186 marks
Question 18
Give a brief description of the principles of the following techniques taking an example in each case.
(a) Crystallisation
(b) Distillation
(c) Chromatography
Solve with AIWritten solution
(a) Crystallisation
Principle: the compound and its impurities have different solubilities in a suitable solvent. The impure compound is dissolved in the minimum amount of a solvent in which it is sparingly soluble at room temperature but appreciably soluble when hot. The hot solution is filtered and cooled; the pure compound crystallises out, while the impurities, present in small amounts, stay in the mother liquor.
Example: impure benzoic acid is purified by crystallisation from hot water.
(b) Distillation
Principle: liquids with sufficiently different boiling points vaporise at different temperatures. The mixture is heated; the lower-boiling component vaporises first, its vapour is condensed and collected, and the higher-boiling component vaporises later. The method also separates volatile liquids from non-volatile impurities.
Example: a mixture of chloroform (b.p. 334 K) and aniline (b.p. 457 K) is separated by simple distillation; chloroform distils first.
(c) Chromatography
Principle: the components of a mixture are distributed differently between a stationary phase and a mobile phase. The mixture is applied to the stationary phase (a solid adsorbent or a liquid held on a support) and the mobile phase (a solvent or gas) is passed over it. Components that are held strongly by the stationary phase move slowly; those held weakly move fast, so they separate. It is classified as adsorption chromatography (column, thin layer) and partition chromatography (paper).
Example: the coloured pigments of a leaf extract (chlorophylls, carotenes) separate into distinct bands on a column of alumina or spots on chromatography paper.
- 192 marks
Question 19
Describe the method, which can be used to separate two compounds with different solubilities in a solvent S.
Solve with AIWritten solution
The two compounds are separated by fractional crystallisation.
- The mixture is dissolved in the minimum amount of hot solvent S to give a saturated solution.
- The solution is allowed to cool. The less soluble compound reaches saturation first and crystallises out, while the more soluble compound stays in solution.
- The crystals are filtered off.
- The mother liquor is concentrated (some solvent is evaporated) and cooled again, so the more soluble compound now crystallises and is collected.
Repeating the crystallisation of each fraction gives both compounds in a pure state.
- 203 marks
Question 20
What is the difference between distillation, distillation under reduced pressure and steam distillation?
Solve with AIWritten solution
Distillation (simple): used for liquids that boil without decomposing and whose boiling points differ sufficiently, or to separate a volatile liquid from non-volatile impurities. The liquid is boiled at atmospheric pressure and the vapour condensed. Example: chloroform (334 K) and aniline (457 K).
Distillation under reduced pressure: used for liquids with very high boiling points or liquids that decompose at or below their normal boiling point. The pressure over the liquid is lowered with a water or vacuum pump; a liquid boils when its vapour pressure equals the external pressure, so it now boils at a temperature well below its normal boiling point, without decomposition. Example: glycerol is separated from spent-lye in the soap industry.
Steam distillation: used for compounds that are steam-volatile and immiscible with water. Steam is passed through the heated mixture; the mixture boils when the sum of the vapour pressures of the organic compound () and of water () equals atmospheric pressure:
Because need only be a fraction of atmospheric pressure, the compound distils below 373 K, together with water, and is then separated from the water. Example: aniline is separated from an aniline–water mixture; essential oils are obtained from plant material.
- 213 marks
Question 21
Discuss the chemistry of Lassaigne's test.
Solve with AIWritten solution
Sodium fusion. The organic compound is fused with metallic sodium. Covalently bound N, S and halogens are converted into ionic sodium salts:
The fused mass is boiled with distilled water and filtered; the filtrate is the sodium fusion (Lassaigne's) extract.
Test for nitrogen. The extract is boiled with iron(II) sulphate and then acidified with concentrated sulphuric acid. Cyanide forms sodium hexacyanidoferrate(II); some Fe²⁺ is oxidised to Fe³⁺, which gives a Prussian blue colour of iron(III) hexacyanidoferrate(II):
Test for sulphur. (i) The extract acidified with acetic acid gives a black precipitate of PbS with lead acetate:
(ii) With sodium nitroprusside it gives a violet colour:
If N and S are both present, sodium thiocyanate (NaSCN) forms, which gives a blood-red colour with Fe³⁺ and no Prussian blue (no free CN⁻):
Test for halogens. The extract is boiled with nitric acid (to decompose any NaCN or Na₂S) and then treated with silver nitrate:
A white precipitate soluble in ammonia shows Cl; a pale yellow precipitate sparingly soluble in ammonia shows Br; a yellow precipitate insoluble in ammonia shows I.
- 224 marks
Question 22
Differentiate between the principle of estimation of nitrogen in an organic compound by
(i) Dumas method and (ii) Kjeldahl's method.
Solve with AIWritten solution
(i) Dumas method
Principle: the compound is heated with copper(II) oxide in an atmosphere of carbon dioxide. Carbon and hydrogen are oxidised to CO₂ and H₂O, and nitrogen is set free as N₂ gas:
Any oxides of nitrogen formed are reduced to N₂ by heated copper gauze. The gas mixture is collected over aqueous KOH in a nitrometer; KOH absorbs CO₂, so only N₂ remains and its volume is measured.

If the volume of nitrogen at STP is mL from g of compound:
(ii) Kjeldahl's method
Principle: the compound is heated with concentrated sulphuric acid (with a little CuSO₄ as catalyst), which converts its nitrogen into ammonium sulphate. The digested mixture is heated with excess NaOH; the ammonia liberated is passed into a known volume of standard sulphuric acid. The unused acid is found by titration with standard alkali, which gives the amount of ammonia, and hence of nitrogen.

If mL of molar H₂SO₄ is taken, the unused acid needs mL of molar NaOH, and g of compound is used:
Key difference: Dumas measures nitrogen directly as N₂ gas by volume and applies to all nitrogen compounds; Kjeldahl measures nitrogen as ammonia by titration and cannot be used for compounds with nitrogen in nitro or azo groups or in a ring (e.g. pyridine), because that nitrogen is not converted to ammonium sulphate.
- 236 marks
Question 23
Discuss the principle of estimation of halogens, sulphur and phosphorus present in an organic compound.
Solve with AIWritten solution
In each case the element is converted from its covalent organic form into an inorganic ion, which is precipitated and weighed. Let g of the compound give g of precipitate.
Halogens (Carius method). The compound is heated with fuming nitric acid in the presence of silver nitrate in a sealed hard-glass Carius tube. Carbon and hydrogen are oxidised to CO₂ and H₂O, and the halogen forms silver halide, AgX, which is filtered, washed, dried and weighed.
Sulphur. The compound is heated in a Carius tube with sodium peroxide or fuming nitric acid; sulphur is oxidised to sulphuric acid. It is precipitated as barium sulphate by adding excess barium chloride solution, and the BaSO₄ is filtered, washed, dried and weighed (molar mass of BaSO₄ = 233 g mol⁻¹).
Phosphorus. The compound is heated with fuming nitric acid, which oxidises phosphorus to phosphoric acid. This is precipitated either
(i) as ammonium phosphomolybdate, (NH₄)₃PO₄·12MoO₃ (molar mass 1877 g mol⁻¹), by adding ammonia and ammonium molybdate:
(ii) or as MgNH₄PO₄ by adding magnesia mixture; on ignition this gives Mg₂P₂O₇ (molar mass 222 g mol⁻¹), which contains two P atoms (62 g):
- 243 marks
Question 24
Explain the principle of paper chromatography.
Solve with AIWritten solution
Paper chromatography is a type of partition chromatography: it separates substances by their continuous differential partitioning between a stationary liquid phase and a mobile liquid phase.
- Stationary phase: water held (adsorbed) in the cellulose fibres of special chromatography paper.
- Mobile phase: a suitable solvent or mixture of solvents that rises up the paper by capillary action.
A spot of the mixture is placed near the bottom of a strip of the paper, and the strip is suspended in a jar with the solvent below the spot. As the solvent rises, each component distributes itself between the water on the paper and the moving solvent according to its relative solubility in the two. A component more soluble in the mobile phase moves farther; one more soluble in water (the stationary phase) lags behind. The components therefore separate into different spots along the paper, giving a chromatogram.
Coloured spots are seen directly; colourless ones are located under ultraviolet light or by spraying a suitable reagent. Each component is characterised by its retardation factor:
- 252 marks
Question 25
Why is nitric acid added to sodium extract before adding silver nitrate for testing halogens?
Solve with AIWritten solution
If the compound also contains nitrogen or sulphur, the sodium extract contains NaCN or Na₂S. With silver nitrate these would give precipitates that interfere with the halogen test:
White AgCN could be mistaken for AgCl, and black Ag₂S would hide the colour of any silver halide. Boiling the extract with nitric acid first decomposes these salts, and the gases formed are expelled:
Only halide ions are then left to react with Ag⁺, so a precipitate with silver nitrate is a true test for halogen.
- 264 marks
Question 26
Explain the reason for the fusion of an organic compound with metallic sodium for testing nitrogen, sulphur and halogens.
Solve with AIWritten solution
In organic compounds, nitrogen, sulphur and halogens are held by covalent bonds, so they do not give ions in water and cannot respond to the usual ionic tests (Fe²⁺/Fe³⁺, Pb²⁺, Ag⁺).
Fusing the compound with metallic sodium (a strongly electropositive, reducing metal) breaks these covalent bonds and converts the elements into ionic, water-soluble sodium salts:
When the fused mass is extracted with water, the extract contains CN⁻, S²⁻ and X⁻ ions, which can now be detected:
- CN⁻: boiled with FeSO₄ and acidified with conc. H₂SO₄ gives Prussian blue.
- S²⁻: black PbS with lead acetate (in acetic acid), or violet colour with sodium nitroprusside.
- X⁻: after boiling with HNO₃, AgNO₃ gives white AgCl (soluble in NH₃), pale yellow AgBr (sparingly soluble in NH₃) or yellow AgI (insoluble in NH₃).
- 272 marks
Question 27
Name a suitable technique of separation of the components from a mixture of calcium sulphate and camphor.
Solve with AIWritten solution
Sublimation.
Camphor is a sublimable solid: on heating it passes directly into vapour, which condenses back to solid on a cool surface. Calcium sulphate is non-volatile and does not sublime.
The mixture is heated gently in a china dish covered with an inverted funnel (stem plugged with cotton). Camphor vapour condenses as pure solid on the cool inner wall of the funnel, and calcium sulphate is left behind in the dish.
- 282 marks
Question 28
Explain, why an organic liquid vaporises at a temperature below its boiling point in its steam distillation?
Solve with AIWritten solution
A liquid boils when its vapour pressure becomes equal to the atmospheric pressure.
In steam distillation the organic liquid and water are immiscible, so each exerts its own vapour pressure independently. The mixture boils when the sum of the two vapour pressures equals atmospheric pressure:
Since water supplies a large part of this pressure, the organic liquid's vapour pressure need only be a fraction of . This is reached at a temperature below its own boiling point (and below 373 K), so the organic liquid vaporises, with the steam, at a lower temperature, which also avoids its decomposition.
- 292 marks
Question 29
Will CCl₄ give white precipitate of AgCl on heating it with silver nitrate? Give reason for your answer.
Solve with AIWritten solution
No.
A white precipitate of AgCl forms only when free chloride ions are present:
In CCl₄ the chlorine atoms are bound to carbon by covalent bonds. CCl₄ does not ionise, so it gives no Cl⁻ ions and no precipitate with silver nitrate.
Chlorine in CCl₄ can be detected only after converting it into Cl⁻, for example by sodium fusion (Lassaigne's test), which gives NaCl.
- 302 marks
Question 30
Why is a solution of potassium hydroxide used to absorb carbon dioxide evolved during the estimation of carbon present in an organic compound?
Solve with AIWritten solution
In the estimation of carbon (Liebig method), the CO₂ produced by burning the compound must be absorbed completely so that its mass can be found from the increase in mass of the absorber.
CO₂ is an acidic oxide, and KOH is a strong base that reacts with it completely to form potassium carbonate:
The increase in mass of the U-tube containing KOH solution therefore equals the mass of CO₂ produced, from which the percentage of carbon is calculated. (The water formed in the combustion is absorbed earlier, in a tube of anhydrous CaCl₂, so it does not add to this mass.)
- 312 marks
Question 31
Why is it necessary to use acetic acid and not sulphuric acid for acidification of sodium extract for testing sulphur by lead acetate test?
Solve with AIWritten solution
In the lead acetate test, sulphide ions in the extract give a black precipitate of lead sulphide:
If sulphuric acid were used for acidification, its sulphate ions would react with lead acetate to give a white precipitate of lead sulphate:
This precipitate would form whether sulphur is present or not, and it would interfere with the observation of black PbS. Acetic acid introduces no ion that precipitates Pb²⁺, so any black precipitate obtained is due to sulphur in the compound.
- 322 marks
Question 32
An organic compound contains 69% carbon and 4.8% hydrogen, the remainder being oxygen. Calculate the masses of carbon dioxide and water produced when 0.20 g of this substance is subjected to complete combustion.
Solve with AIWritten solution
Given: mass of compound , C = 69%, H = 4.8%.
Mass of CO₂. 12 g of carbon gives 44 g of CO₂.
Mass of H₂O. 2 g of hydrogen gives 18 g of H₂O.
Complete combustion of 0.20 g of the compound gives 0.506 g of carbon dioxide and 0.0864 g of water.
- 332 marks
Question 33
A sample of 0.50 g of an organic compound was treated according to Kjeldahl's method. The ammonia evolved was absorbed in 50 mL of 0.5 M H₂SO₄. The residual acid required 60 mL of 0.5 M solution of NaOH for neutralisation. Find the percentage composition of nitrogen in the compound.
Solve with AIWritten solution
Given: ; H₂SO₄: , ; NaOH: , .
NaOH reacts with H₂SO₄ in the ratio 2 : 1, so 60 mL of 0.5 M NaOH neutralises 30 mL of 0.5 M H₂SO₄. Acid used by ammonia = 50 − 30 = 20 mL of 0.5 M H₂SO₄.
Check by moles: H₂SO₄ used by NH₃ = 20 mL × 0.5 M = 10 mmol, which neutralises 20 mmol NH₃, containing 20 mmol N = 0.280 g N; 0.280 / 0.50 × 100 = 56.0%.
The compound contains 56.0% nitrogen.
- 342 marks
Question 34
0.3780 g of an organic chloro compound gave 0.5740 g of silver chloride in Carius estimation. Calculate the percentage of chlorine present in the compound.
Solve with AIWritten solution
Given: , mass of AgCl . Molar mass of AgCl = 108 + 35.5 = 143.5 g mol⁻¹.
The compound contains 37.57% chlorine.
- 352 marks
Question 35
In the estimation of sulphur by Carius method, 0.468 g of an organic sulphur compound afforded 0.668 g of barium sulphate. Find out the percentage of sulphur in the given compound.
Solve with AIWritten solution
Given: , mass of BaSO₄ . Molar mass of BaSO₄ = 137 + 32 + 64 = 233 g mol⁻¹, which contains 32 g of sulphur.
The compound contains 19.60% sulphur.
- 361 mark
Question 36
In the organic compound CH₂=CH–CH₂–CH₂–C≡CH, the pair of hybridised orbitals involved in the formation of C₂–C₃ bond is:
Solve with AIAnswer
(A) sp – sp²
(B) sp – sp³
- Correct
(C) sp² – sp³
(D) sp³ – sp³
Option (C) is correct.
Explanation: Numbering from the double-bond end (both ends give locants 1,5; the double bond then gets the lower number): . C-2 is a doubly bonded carbon (three σ bonds), so it is sp². C-3 has only single bonds (four σ bonds), so it is sp³. The C₂–C₃ σ bond is therefore formed by overlap of an sp² orbital of C-2 with an sp³ orbital of C-3.
- (A) sp – sp² would need C-3 to be a triply bonded carbon; the sp carbons are C-5 and C-6.
- (B) sp – sp³ describes the C₄–C₅ bond, not C₂–C₃.
- (D) sp³ – sp³ describes the C₃–C₄ bond, between two saturated carbons.
- 371 mark
Question 37
In the Lassaigne's test for nitrogen in an organic compound, the Prussian blue colour is obtained due to the formation of:
Solve with AIAnswer
(A) Na₄[Fe(CN)₆]
- Correct
(B) Fe₄[Fe(CN)₆]₃
(C) Fe₂[Fe(CN)₆]
(D) Fe₃[Fe(CN)₆]₄
Option (B) is correct.
Explanation: Sodium fusion converts nitrogen into NaCN. On boiling the extract with FeSO₄, cyanide forms hexacyanidoferrate(II): . On acidifying with concentrated H₂SO₄, some Fe²⁺ is oxidised to Fe³⁺, which combines with the complex ion: . Iron(III) hexacyanidoferrate(II), Fe₄[Fe(CN)₆]₃, is Prussian blue.
- (A) Na₄[Fe(CN)₆] is the soluble, pale-yellow intermediate formed before Fe³⁺ reacts; it is not blue.
- (C) Fe₂[Fe(CN)₆] would be iron(II) hexacyanidoferrate(II) (2 × 2+ = 4+ balances the 4− complex ion); Fe³⁺ is needed for the blue colour.
- (D) Fe₃[Fe(CN)₆]₄ reverses the numbers and is not electrically neutral: 3 Fe³⁺ give 9+ but 4 [Fe(CN)₆]⁴⁻ give 16−.
- 381 mark
Question 38
Which of the following carbocation is most stable?
Solve with AIAnswer
(A) (CH₃)₃C.C⁺H₂
- Correct
(B) (CH₃)₃C⁺
(C) CH₃CH₂C⁺H₂
(D) CH₃C⁺HCH₂CH₃
Option (B) is correct.
Explanation: Carbocation stability follows tertiary > secondary > primary > methyl, because alkyl groups attached to the positive carbon release electrons (+I effect) and stabilise it by hyperconjugation. (CH₃)₃C⁺ is tertiary: three methyl groups on the positive carbon provide nine α-hydrogens for hyperconjugation, so it is the most stable.
- (A) (CH₃)₃C–CH₂⁺ is primary; its only α-carbon is quaternary and carries no hydrogen, so it gets no C–H hyperconjugation.
- (C) CH₃CH₂CH₂⁺ is primary, with only one alkyl group on the positive carbon.
- (D) CH₃CH⁺CH₂CH₃ is secondary (two alkyl groups): more stable than (A) and (C), less stable than (B).
- 391 mark
Question 39
The best and latest technique for isolation, purification and separation of organic compounds is:
Solve with AIAnswer
(A) Crystallisation
(B) Distillation
(C) Sublimation
- Correct
(D) Chromatography
Option (D) is correct.
Explanation: Chromatography separates the components of a mixture by their different distribution between a stationary phase and a mobile phase. NCERT describes chromatography as an important technique extensively used to separate mixtures into their components, purify compounds and test their purity. It works even for very small quantities and for compounds with very similar physical properties.
- (A) Crystallisation needs a difference in solubility and generally a fair amount of material.
- (B) Distillation needs a sufficient difference in boiling points and works only for liquids.
- (C) Sublimation works only when one component sublimes and the other does not.
- 401 mark
Question 40
The reaction:
CH₃CH₂I + KOH(aq) → CH₃CH₂OH + KI
is classified as:
Solve with AIAnswer
(A) electrophilic substitution
- Correct
(B) nucleophilic substitution
(C) elimination
(D) addition
Option (B) is correct.
Explanation: The C–I bond is polar, so the carbon bonded to iodine is electron-deficient (δ+). In aqueous KOH, the hydroxide ion OH⁻ (an electron-rich nucleophile) attacks this carbon and the iodide ion leaves. One group (–I) is replaced by another (–OH) supplied by a nucleophile, so the reaction is nucleophilic substitution.
- (A) Electrophilic substitution needs an electron-deficient attacking reagent (as in aromatic substitution by NO₂⁺); OH⁻ is electron-rich.
- (C) Elimination would form a C=C bond (ethene); here the product is an alcohol, ethanol.
- (D) Addition needs a multiple bond in the substrate; CH₃CH₂I is saturated, and one group is exchanged rather than added.
What Class 11 Chemistry Ch 9 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01The Shapes Of Carbon Compounds
- 02Characteristic Features of 𝞹 –bonds:
- 03Structural Representations Of Organic Compounds:
- 04Classification Of Organic Compounds
- 05Nomenclature Of Organic Compounds
- 06Isomerism
- 07Fission Of Covalent Bond
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 9 before.
Class 11 Chemistry Ch 9 questions students ask
How many questions are there in Class 11 Chemistry Ch 9?
40 questions. Every one is solved step by step on this page.
Are these Class 11 Chemistry solutions free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 11 Chemistry Ch 9 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
