Confirming your payment

Skip to content

Opening your dashboard

Class 11 Chemistry Chapter 8: Hydrocarbon Solutions

25 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.

AI Tutor

Get talked through Ch 8, not just shown the answer

Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.

  • Ask it out loud, in your own words
  • It gives you the next step, not the answer
  • Stuck on part (ii)? Start there
Ch 8 solutions

25 questions with solutions

1–7 marks · Mixed difficulty

  1. 1

    Question 1

    How do you account for the formation of ethane during chlorination of methane?

    Medium
    3 marks
    Solve with AI
    Written solution

    Chlorination of methane in diffused sunlight (or UV light) is a free radical chain reaction. Ethane is formed in the termination step, when two methyl free radicals combine.

    (1) Chain initiation: light breaks the weaker Cl–Cl bond homolytically.

    Cl−Cl→hν2 C˙l\text{Cl}-\text{Cl} \xrightarrow{h\nu} 2\,\dot{\text{C}}\text{l}

    (2) Chain propagation: a chlorine radical abstracts a hydrogen atom from methane to give a methyl free radical, which then attacks a chlorine molecule and regenerates a chlorine radical.

    CH4+C˙l→C˙H3+HCl\text{CH}_4 + \dot{\text{C}}\text{l} \rightarrow \dot{\text{C}}\text{H}_3 + \text{HCl} C˙H3+Cl2→CH3Cl+C˙l\dot{\text{C}}\text{H}_3 + \text{Cl}_2 \rightarrow \text{CH}_3\text{Cl} + \dot{\text{C}}\text{l}

    (3) Chain termination: the chain stops when two free radicals combine.

    C˙l+C˙l→Cl2\dot{\text{C}}\text{l} + \dot{\text{C}}\text{l} \rightarrow \text{Cl}_2 C˙H3+C˙l→CH3Cl\dot{\text{C}}\text{H}_3 + \dot{\text{C}}\text{l} \rightarrow \text{CH}_3\text{Cl} C˙H3+C˙H3→CH3−CH3\dot{\text{C}}\text{H}_3 + \dot{\text{C}}\text{H}_3 \rightarrow \text{CH}_3-\text{CH}_3

    The last termination step joins two methyl radicals to give ethane. Its presence among the products (in small amounts) is therefore evidence that methyl free radicals are formed during the reaction, i.e. that chlorination of methane proceeds by a free radical mechanism.

  2. 2

    Question 2

    Write IUPAC names of the following compounds:

    (a) CH3CH=C(CH3)2\text{CH}_3\text{CH}=\text{C}(\text{CH}_3)_2

    (b) CH2=CH−C≡C−CH3\text{CH}_2=\text{CH}-\text{C}\equiv\text{C}-\text{CH}_3

    (c), (d) and (e): the structures shown below

    Class 11 Chemistry Hydrocarbon

    (f) CH3(CH2)4CH(CH2)3CH3\text{CH}_3(\text{CH}_2)_4\text{CH}(\text{CH}_2)_3\text{CH}_3, in which the CH carbon carries a −CH2−CH(CH3)2-\text{CH}_2-\text{CH}(\text{CH}_3)_2 group

    (g) CH3−CH=CH−CH2−CH=CH−CH(C2H5)−CH2−CH=CH2\text{CH}_3-\text{CH}=\text{CH}-\text{CH}_2-\text{CH}=\text{CH}-\text{CH}(\text{C}_2\text{H}_5)-\text{CH}_2-\text{CH}=\text{CH}_2

    Medium
    7 marks
    Solve with AI
    Written solution

    (a) 2-Methylbut-2-ene. The longest chain containing the double bond has 4 carbons: C4H3C3H=C2(CH3)C1H3\overset{4}{\text{C}}\text{H}_3\overset{3}{\text{C}}\text{H}=\overset{2}{\text{C}}(\text{CH}_3)\overset{1}{\text{C}}\text{H}_3. Numbering from the right gives the double bond locant 2 and the methyl group locant 2.

    (b) Pent-1-en-3-yne. Five-carbon chain, C1H2=C2H−C3≡C4−C5H3\overset{1}{\text{C}}\text{H}_2=\overset{2}{\text{C}}\text{H}-\overset{3}{\text{C}}\equiv\overset{4}{\text{C}}-\overset{5}{\text{C}}\text{H}_3. Numbering from the left gives the multiple bonds the lowest set of locants (1, 3); "-ene" is written before "-yne" and the final "e" of "ene" is dropped.

    (c) Buta-1,3-diene. A four-carbon chain, CH2=CH−CH=CH2\text{CH}_2=\text{CH}-\text{CH}=\text{CH}_2, with double bonds at C1 and C3.

    (d) 4-Phenylbut-1-ene. The chain is C1H2=C2H−C3H2−C4H2−C6H5\overset{1}{\text{C}}\text{H}_2=\overset{2}{\text{C}}\text{H}-\overset{3}{\text{C}}\text{H}_2-\overset{4}{\text{C}}\text{H}_2-\text{C}_6\text{H}_5; the double bond gets locant 1 and the phenyl group is on C4.

    (e) 2-Methylphenol. The OH group is the principal group, so the parent is phenol and the carbon carrying OH is C1; the methyl group is on the adjacent carbon, C2 (common name o-cresol).

    (f) 5-(2-Methylpropyl)decane. The longest chain is 5+1+4=105 + 1 + 4 = 10 carbons (decane). Numbering from the right-hand end, CH3(CH2)3−\text{CH}_3(\text{CH}_2)_3- is C1 to C4, so the branched carbon is C5 (from the left it would be C6). The substituent −CH2CH(CH3)2-\text{CH}_2\text{CH}(\text{CH}_3)_2 is a 2-methylpropyl group (isobutyl).

    (g) 4-Ethyldeca-1,5,8-triene. The longest chain containing all three double bonds has 10 carbons. Numbering from the right-hand end (CH2=\text{CH}_2= is C1) gives the double bonds the locants 1, 5, 8 (numbering from the left would give 2, 5, 8, which is higher), and the ethyl group falls on C4.

  3. 3

    Question 3

    For the following compounds, write structural formulas and IUPAC names for all possible isomers having the number of double or triple bonds as indicated:

    (a) C₄H₈ (one double bond)

    (b) C₅H₈ (one triple bond)

    Medium
    4 marks
    Solve with AI
    Written solution

    (a) C₄H₈ (one double bond): four isomers are possible. Three are structural isomers (but-1-ene, but-2-ene, 2-methylprop-1-ene), and but-2-ene exists as a pair of geometrical isomers because each doubly bonded carbon carries two different groups (H and CH₃).

    Class 11 Chemistry Hydrocarbon

    • (i) CH3CH2CH=CH2\text{CH}_3\text{CH}_2\text{CH}=\text{CH}_2: but-1-ene
    • (ii) cis-but-2-ene: the two CH₃ groups on the same side of the double bond
    • (iii) trans-but-2-ene: the two CH₃ groups on opposite sides
    • (iv) (CH3)2C=CH2(\text{CH}_3)_2\text{C}=\text{CH}_2: 2-methylprop-1-ene

    (b) C₅H₈ (one triple bond): three isomers are possible. Geometrical isomerism does not arise for alkynes because the triple-bonded carbons are linear (sp hybridised).

    Class 11 Chemistry Hydrocarbon

    • (i) CH3CH2CH2C≡CH\text{CH}_3\text{CH}_2\text{CH}_2\text{C}\equiv\text{CH}: pent-1-yne
    • (ii) CH3CH2C≡CCH3\text{CH}_3\text{CH}_2\text{C}\equiv\text{C}\text{CH}_3: pent-2-yne
    • (iii) (CH3)2CHC≡CH(\text{CH}_3)_2\text{CH}\text{C}\equiv\text{CH}: 3-methylbut-1-yne
  4. 4

    Question 4

    Write IUPAC names of the products obtained by the ozonolysis of the following compounds:

    (i) Pent-2-ene

    (ii) 3,4-Dimethylhept-3-ene

    (iii) 2-Ethylbut-1-ene

    (iv) 1-Phenylbut-1-ene

    Hard
    4 marks
    Solve with AI
    Written solution

    In ozonolysis the alkene is treated with ozone (in CH₂Cl₂ at 196 K) to form an ozonide, which is then cleaved with zinc and water. The C=C bond is broken and each doubly bonded carbon becomes a C=O group: a carbon that carried one H gives an aldehyde, a carbon that carried no H gives a ketone, and a =CH2=\text{CH}_2 end gives methanal.

    (i) Pent-2-ene gives propanal and ethanal.

    CH3CH2CH=CHCH3→(ii) Zn/H2O(i) O3, CH2Cl2, 196 KCH3CH2CHO+CH3CHO\text{CH}_3\text{CH}_2\text{CH}=\text{CHCH}_3 \xrightarrow[\text{(ii) Zn/H}_2\text{O}]{\text{(i) O}_3,\ \text{CH}_2\text{Cl}_2,\ 196\ \text{K}} \text{CH}_3\text{CH}_2\text{CHO} + \text{CH}_3\text{CHO}

    (ii) 3,4-Dimethylhept-3-ene gives butan-2-one and pentan-2-one.

    CH3CH2C(CH3)=C(CH3)CH2CH2CH3→(ii) Zn/H2O(i) O3CH3CH2COCH3+CH3COCH2CH2CH3\text{CH}_3\text{CH}_2\text{C}(\text{CH}_3)=\text{C}(\text{CH}_3)\text{CH}_2\text{CH}_2\text{CH}_3 \xrightarrow[\text{(ii) Zn/H}_2\text{O}]{\text{(i) O}_3} \text{CH}_3\text{CH}_2\text{COCH}_3 + \text{CH}_3\text{COCH}_2\text{CH}_2\text{CH}_3

    (iii) 2-Ethylbut-1-ene gives pentan-3-one and methanal.

    (CH3CH2)2C=CH2→(ii) Zn/H2O(i) O3(CH3CH2)2C=O+HCHO(\text{CH}_3\text{CH}_2)_2\text{C}=\text{CH}_2 \xrightarrow[\text{(ii) Zn/H}_2\text{O}]{\text{(i) O}_3} (\text{CH}_3\text{CH}_2)_2\text{C}=\text{O} + \text{HCHO}

    (iv) 1-Phenylbut-1-ene gives benzaldehyde and propanal.

    C6H5CH=CHCH2CH3→(ii) Zn/H2O(i) O3C6H5CHO+CH3CH2CHO\text{C}_6\text{H}_5\text{CH}=\text{CHCH}_2\text{CH}_3 \xrightarrow[\text{(ii) Zn/H}_2\text{O}]{\text{(i) O}_3} \text{C}_6\text{H}_5\text{CHO} + \text{CH}_3\text{CH}_2\text{CHO}
  5. 5

    Question 5

    An alkene 'A' on ozonolysis gives a mixture of ethanal and pentan-3-one. Write the structure and IUPAC name of 'A'.

    Medium
    3 marks
    Solve with AI
    Written solution

    Ozonolysis converts each doubly bonded carbon into a C=O group. To find the alkene, write the two carbonyl compounds with their oxygen atoms facing each other, remove the oxygens and join the two carbons by a double bond.

    Ethanal: CH3CH=O\text{CH}_3\text{CH}=\text{O} and pentan-3-one: O=C(CH2CH3)2\text{O}=\text{C}(\text{CH}_2\text{CH}_3)_2

    CH3CH=O+O=C(CH2CH3)2  ⟹  CH3CH=C(CH2CH3)2\text{CH}_3\text{CH}=\text{O} \quad + \quad \text{O}=\text{C}(\text{CH}_2\text{CH}_3)_2 \;\Longrightarrow\; \text{CH}_3\text{CH}=\text{C}(\text{CH}_2\text{CH}_3)_2

    The structure of 'A' is:

    Class 11 Chemistry Hydrocarbon

    The longest chain containing the double bond has five carbons, numbered so that the double bond gets locant 2; the ethyl group is on C3. Hence 'A' is 3-ethylpent-2-ene, CH3CH=C(C2H5)2\text{CH}_3\text{CH}=\text{C}(\text{C}_2\text{H}_5)_2 (molecular formula C₇H₁₄).

    Check:

    CH3CH=C(C2H5)2→(ii) Zn/H2O(i) O3CH3CHO+(C2H5)2C=O\text{CH}_3\text{CH}=\text{C}(\text{C}_2\text{H}_5)_2 \xrightarrow[\text{(ii) Zn/H}_2\text{O}]{\text{(i) O}_3} \text{CH}_3\text{CHO} + (\text{C}_2\text{H}_5)_2\text{C}=\text{O}
  6. 6

    Question 6

    An alkene 'A' contains three C–C, eight C–H σ bonds and one C–C π bond. 'A' on ozonolysis gives two moles of an aldehyde of molar mass 44 u. Write the IUPAC name of 'A'.

    Hard
    3 marks
    Solve with AI
    Written solution

    The aldehyde: An aldehyde of molar mass 44 u is ethanal, CH3CHO\text{CH}_3\text{CHO} (2×12+4×1+16=442 \times 12 + 4 \times 1 + 16 = 44 u).

    The alkene is symmetrical: Two moles of the same aldehyde are formed from one mole of 'A', so the two halves of the molecule on either side of the C=C bond are identical: each doubly bonded carbon carries one H and one CH₃ group.

    Checking the bond counts: Joining two CH3CH=\text{CH}_3\text{CH}= units gives CH3−CH=CH−CH3\text{CH}_3-\text{CH}=\text{CH}-\text{CH}_3, which has 4 carbon atoms and 8 hydrogen atoms (C₄H₈). Its C–C σ bonds are C1–C2, C2–C3 (the σ part of the double bond) and C3–C4, i.e. three; it has eight C–H σ bonds and one C–C π bond, exactly as given.

    Class 11 Chemistry Hydrocarbon

    Hence 'A' is but-2-ene.

    Ozonolysis of 'A' (through the ozonide) gives two moles of ethanal:

    Class 11 Chemistry Hydrocarbon

  7. 7

    Question 7

    Propanal and pentan-3-one are the ozonolysis products of an alkene. What is the structural formula of the alkene?

    Hard
    2 marks
    Solve with AI
    Written solution

    Write the two carbonyl compounds with their oxygen atoms facing each other, remove the oxygens and join the carbonyl carbons by a double bond.

    Propanal: CH3CH2CH=O\text{CH}_3\text{CH}_2\text{CH}=\text{O} and pentan-3-one: O=C(CH2CH3)2\text{O}=\text{C}(\text{CH}_2\text{CH}_3)_2

    CH3CH2CH=O+O=C(CH2CH3)2  ⟹  CH3CH2CH=C(CH2CH3)2\text{CH}_3\text{CH}_2\text{CH}=\text{O} \quad + \quad \text{O}=\text{C}(\text{CH}_2\text{CH}_3)_2 \;\Longrightarrow\; \text{CH}_3\text{CH}_2\text{CH}=\text{C}(\text{CH}_2\text{CH}_3)_2

    The alkene is CH3CH2CH=C(CH2CH3)2\text{CH}_3\text{CH}_2\text{CH}=\text{C}(\text{CH}_2\text{CH}_3)_2:

    Class 11 Chemistry Hydrocarbon

    Its longest chain through the double bond has six carbons with the double bond at C3 and an ethyl group on C3, so it is 3-ethylhex-3-ene (C₈H₁₆).

  8. 8

    Question 8

    Write chemical equations for the combustion reaction of the following hydrocarbons:

    (i) Butane

    (ii) Pentene

    (iii) Hexyne

    (iv) Toluene

    Hard
    4 marks
    Solve with AI
    Written solution

    On complete combustion in excess air or oxygen, a hydrocarbon gives carbon dioxide and water, and a large amount of heat is released:

    CxHy+(x+y4)O2→x CO2+y2 H2O+heat\text{C}_x\text{H}_y + \left(x + \frac{y}{4}\right)\text{O}_2 \rightarrow x\,\text{CO}_2 + \frac{y}{2}\,\text{H}_2\text{O} + \text{heat}

    (i) Butane, C₄H₁₀:

    2C4H10+13O2→8CO2+10H2O+heat2\text{C}_4\text{H}_{10} + 13\text{O}_2 \rightarrow 8\text{CO}_2 + 10\text{H}_2\text{O} + \text{heat}

    (ii) Pentene, C₅H₁₀:

    2C5H10+15O2→10CO2+10H2O+heat2\text{C}_5\text{H}_{10} + 15\text{O}_2 \rightarrow 10\text{CO}_2 + 10\text{H}_2\text{O} + \text{heat}

    (iii) Hexyne, C₆H₁₀:

    2C6H10+17O2→12CO2+10H2O+heat2\text{C}_6\text{H}_{10} + 17\text{O}_2 \rightarrow 12\text{CO}_2 + 10\text{H}_2\text{O} + \text{heat}

    (iv) Toluene, C₆H₅CH₃ (C₇H₈):

    C6H5CH3+9O2→7CO2+4H2O+heat\text{C}_6\text{H}_5\text{CH}_3 + 9\text{O}_2 \rightarrow 7\text{CO}_2 + 4\text{H}_2\text{O} + \text{heat}

    Each equation is balanced: for example in (iv), oxygen atoms on the left =9×2=18= 9 \times 2 = 18 and on the right =7×2+4=18= 7 \times 2 + 4 = 18.

  9. 9

    Question 9

    Draw the cis and trans structures of hex-2-ene. Which isomer will have a higher boiling point and why?

    Medium
    3 marks
    Solve with AI
    Written solution

    Hex-2-ene is CH3−CH=CH−CH2−CH2−CH3\text{CH}_3-\text{CH}=\text{CH}-\text{CH}_2-\text{CH}_2-\text{CH}_3:

    Class 11 Chemistry Hydrocarbon

    Each doubly bonded carbon carries two different groups (H and CH₃ on C2; H and CH₂CH₂CH₃ on C3), and rotation about the C=C bond is restricted, so it exists as two geometrical isomers:

    Class 11 Chemistry Hydrocarbon

    In the cis isomer the CH₃ and CH₂CH₂CH₃ groups are on the same side of the double bond; in the trans isomer they are on opposite sides.

    cis-Hex-2-ene has the higher boiling point.

    Class 11 Chemistry Hydrocarbon

    In the cis isomer the dipoles of the C−CH3\text{C}-\text{CH}_3 and C−CH2CH2CH3\text{C}-\text{CH}_2\text{CH}_2\text{CH}_3 bonds point to the same side and add up, so the molecule has a net dipole moment. In the trans isomer the two bond dipoles point in opposite directions and largely cancel, so its dipole moment is very small. The more polar cis isomer has stronger intermolecular dipole–dipole attractions in addition to van der Waals forces, so more energy is needed to separate its molecules, and it boils at a higher temperature.

  10. 10

    Question 10

    Why is benzene extraordinarily stable though it contains three double bonds?

    Medium
    2 marks
    Solve with AI
    Written solution

    Benzene does not have three localised double bonds; its π electrons are delocalised over the whole ring.

    All six carbon atoms are sp² hybridised. Each carbon forms σ bonds with its two neighbouring carbons and with one hydrogen atom, so the molecule is planar. Each carbon is left with one unhybridised p orbital perpendicular to the plane of the ring. Each p orbital overlaps sideways equally with the p orbitals on both neighbouring carbons, so the six π electrons form a continuous electron cloud above and below the plane of the ring:

    Class 11 Chemistry Hydrocarbon

    In terms of resonance, benzene is a hybrid of the two Kekulé structures, and all six C–C bonds have the same length (139 pm, between C–C 154 pm and C=C 133 pm). The six π electrons are free to move over all six carbon nuclei. This delocalisation of π electrons lowers the energy of the molecule (resonance stabilisation), which is why benzene is extraordinarily stable and resists the addition reactions typical of alkenes.

  11. 11

    Question 11

    What are the necessary conditions for any system to be aromatic?

    Medium
    2 marks
    Solve with AI
    Written solution

    According to NCERT, a compound is aromatic only if it satisfies all of the following conditions:

    (i) Planarity: the molecule (ring) must be planar.

    (ii) Complete delocalisation of π electrons in the ring: every ring atom must have a p orbital, so that the π electrons form one continuous cyclic cloud above and below the ring (the ring must be cyclic and fully conjugated).

    (iii) Hückel's rule: the ring must contain (4n+2)(4n + 2) π electrons, where n=0,1,2,3,…n = 0, 1, 2, 3, \ldots (that is, 2, 6, 10, 14, … π electrons).

    For example, benzene is planar, fully conjugated and has 6 π electrons (n=1n = 1), so it is aromatic. Cyclo-octatetraene has 8 π electrons and is not planar, so it is not aromatic.

  12. 12

    Question 12

    Explain why the following systems are not aromatic.

    Class 11 Chemistry Hydrocarbon

    Hard
    3 marks
    Solve with AI
    Written solution

    An aromatic system must be planar, have a continuous ring of p orbitals (complete delocalisation of π electrons) and contain (4n+2)(4n + 2) π electrons.

    (i) The ring contains one sp³-hybridised carbon (the CH₂ group in the ring), which has no p orbital. Although the molecule has six π electrons (two ring C=C bonds and the exocyclic C=CH₂ bond), they do not form a single cyclic cloud around the ring: the delocalisation is broken at the sp³ carbon, and the exocyclic double bond lies outside the ring. Hence it is not aromatic.

    (ii) Cyclopenta-1,3-diene also contains an sp³-hybridised CH₂ carbon, so the cyclic conjugation is broken. Moreover it has only 4 π electrons, which does not fit (4n+2)(4n + 2). Hence it is not aromatic.

    (iii) Cyclo-octatetraene has 8 π electrons, which does not fit (4n+2)(4n + 2) (it is 4n4n with n=2n = 2). It is also not planar: it adopts a tub shape, so its p orbitals cannot overlap continuously around the ring.

    Class 11 Chemistry Hydrocarbon

    Hence it is not aromatic.

  13. 13

    Question 13

    How will you convert benzene into:

    (i) p-nitrobromobenzene

    (ii) m-nitrochlorobenzene

    (iii) p-nitrotoluene

    (iv) acetophenone

    Hard
    4 marks
    Solve with AI
    Written solution

    The order of the steps is decided by the directing influence of the group introduced first: halogens and alkyl groups are ortho/para directing, the nitro group is meta directing.

    (i) p-Nitrobromobenzene: brominate first, then nitrate. Br is o/p directing, so nitration of bromobenzene gives o- and p-bromonitrobenzene. The p-isomer, a high-melting solid, is separated from the o-isomer by fractional crystallisation.

    Class 11 Chemistry Hydrocarbon

    (ii) m-Nitrochlorobenzene: nitrate first, then chlorinate. The NO₂ group is meta directing, so chlorination of nitrobenzene in the presence of a Lewis acid gives the m-isomer.

    Class 11 Chemistry Hydrocarbon

    (iii) p-Nitrotoluene: methylate first by Friedel–Crafts alkylation, then nitrate. CH₃ is o/p directing, so nitration of toluene gives o- and p-nitrotoluene, from which the p-isomer is separated.

    C6H6+CH3Cl→anhyd. AlCl3C6H5CH3+HCl\text{C}_6\text{H}_6 + \text{CH}_3\text{Cl} \xrightarrow{\text{anhyd. AlCl}_3} \text{C}_6\text{H}_5\text{CH}_3 + \text{HCl} C6H5CH3→conc. HNO3 + conc. H2SO4o- and p-O2N−C6H4−CH3\text{C}_6\text{H}_5\text{CH}_3 \xrightarrow{\text{conc. HNO}_3\ +\ \text{conc. H}_2\text{SO}_4} o\text{- and } p\text{-O}_2\text{N}-\text{C}_6\text{H}_4-\text{CH}_3

    Class 11 Chemistry Hydrocarbon

    (iv) Acetophenone: Friedel–Crafts acylation of benzene with acetyl chloride (or acetic anhydride) in the presence of anhydrous AlCl₃.

    Class 11 Chemistry Hydrocarbon

  14. 14

    Question 14

    In the alkane H3C−CH2−C(CH3)2−CH2−CH(CH3)2\text{H}_3\text{C}-\text{CH}_2-\text{C}(\text{CH}_3)_2-\text{CH}_2-\text{CH}(\text{CH}_3)_2, identify 1°, 2°, 3° carbon atoms and give the number of H atoms bonded to each one of these.

    Medium
    4 marks
    Solve with AI
    Written solution

    A carbon attached to one other carbon is primary (1°), to two carbons secondary (2°), to three carbons tertiary (3°) and to four carbons quaternary (4°). Writing out the structure with each carbon labelled:

    Class 11 Chemistry Hydrocarbon

    Numbering the main chain from left to right as C1 to C5:

    TypeCarbon atomsNumberH atoms on eachTotal H
    1°C1, the two CH₃ on C3, the two CH₃ on C55315
    2°C2 and C4 (the two CH₂ groups)224
    3°C5 (the CH group)111
    4°C3100

    So there are five 1° carbons carrying 15 H atoms, two 2° carbons carrying 4 H atoms and one 3° carbon carrying 1 H atom. (C3 is a 4° carbon with no H.) Check: 15+4+1=2015 + 4 + 1 = 20 H atoms, which matches the molecular formula C₉H₂₀.

  15. 15

    Question 15

    What effect does branching of an alkane chain have on its boiling point?

    Medium
    2 marks
    Solve with AI
    Written solution

    Branching lowers the boiling point of an alkane compared with its straight-chain isomer, and the greater the branching, the lower the boiling point.

    The only attractive forces between alkane molecules are weak van der Waals (dispersion) forces, whose strength depends on the area of contact between neighbouring molecules. As branching increases, the molecule becomes more compact and nearly spherical, so its surface area decreases. The smaller area of contact means weaker intermolecular forces, which are overcome at a lower temperature.

    Example (the three isomers of C₅H₁₂): n-pentane (b.p. 309 K) > 2-methylbutane, isopentane (b.p. 301 K) > 2,2-dimethylpropane, neopentane (b.p. 282.5 K).

  16. 16

    Question 16

    Addition of HBr to propene yields 2-bromopropane, while in the presence of benzoyl peroxide, the same reaction yields 1-bromopropane. Explain and give the mechanism.

    Hard
    5 marks
    Solve with AI
    Written solution

    (a) In the absence of peroxide: Markovnikov addition (electrophilic addition).

    HBr provides the electrophile H⁺ and the nucleophile Br⁻.

    H−Br→H++Br−\text{H}-\text{Br} \rightarrow \text{H}^+ + \text{Br}^-

    Step 1 (slow): the π electrons of propene attack H⁺. Two carbocations are possible; the secondary carbocation is more stable than the primary one and is formed preferentially.

    CH3−CH=CH2+H+→CH3−C+H−CH3(2∘, more stable)\text{CH}_3-\text{CH}=\text{CH}_2 + \text{H}^+ \rightarrow \text{CH}_3-\overset{+}{\text{C}}\text{H}-\text{CH}_3 \quad (2^\circ,\ \text{more stable})

    rather than CH3−CH2−C+H2\text{CH}_3-\text{CH}_2-\overset{+}{\text{C}}\text{H}_2 (1°, less stable).

    Step 2 (fast): Br⁻ attacks the secondary carbocation.

    CH3−C+H−CH3+Br−→CH3−CHBr−CH3(2-bromopropane)\text{CH}_3-\overset{+}{\text{C}}\text{H}-\text{CH}_3 + \text{Br}^- \rightarrow \text{CH}_3-\text{CHBr}-\text{CH}_3 \quad (\text{2-bromopropane})

    The negative part of the addendum adds to the carbon carrying fewer hydrogen atoms, in accordance with Markovnikov's rule.

    (b) In the presence of benzoyl peroxide: anti-Markovnikov addition (peroxide or Kharasch effect, free radical chain mechanism).

    (i) Initiation: the peroxide undergoes homolysis, and the phenyl radical formed abstracts H from HBr to give a bromine free radical.

    C6H5CO−O−O−COC6H5→homolysis2 C6H5COO˙→2 C˙6H5+2 CO2\text{C}_6\text{H}_5\text{CO}-\text{O}-\text{O}-\text{COC}_6\text{H}_5 \xrightarrow{\text{homolysis}} 2\,\text{C}_6\text{H}_5\text{CO}\dot{\text{O}} \rightarrow 2\,\dot{\text{C}}_6\text{H}_5 + 2\,\text{CO}_2 C˙6H5+H−Br→C6H6+B˙r\dot{\text{C}}_6\text{H}_5 + \text{H}-\text{Br} \rightarrow \text{C}_6\text{H}_6 + \dot{\text{B}}\text{r}

    (ii) Propagation: the bromine radical adds to the terminal CH₂ carbon so that the more stable secondary free radical is formed.

    CH3−CH=CH2+B˙r→CH3−C˙H−CH2Br(2∘, more stable)\text{CH}_3-\text{CH}=\text{CH}_2 + \dot{\text{B}}\text{r} \rightarrow \text{CH}_3-\dot{\text{C}}\text{H}-\text{CH}_2\text{Br} \quad (2^\circ,\ \text{more stable})

    rather than CH3−CHBr−C˙H2\text{CH}_3-\text{CHBr}-\dot{\text{C}}\text{H}_2 (1°, less stable). The secondary radical then abstracts H from another HBr molecule, giving the product and a new bromine radical that continues the chain.

    CH3−C˙H−CH2Br+H−Br→CH3−CH2−CH2Br+B˙r(1-bromopropane)\text{CH}_3-\dot{\text{C}}\text{H}-\text{CH}_2\text{Br} + \text{H}-\text{Br} \rightarrow \text{CH}_3-\text{CH}_2-\text{CH}_2\text{Br} + \dot{\text{B}}\text{r} \quad (\text{1-bromopropane})

    (iii) Termination: the chain stops when two radicals combine, e.g. B˙r+B˙r→Br2\dot{\text{B}}\text{r} + \dot{\text{B}}\text{r} \rightarrow \text{Br}_2.

    Thus the product depends on the intermediate: the more stable 2° carbocation gives 2-bromopropane, while the more stable 2° free radical (formed when Br adds first) gives 1-bromopropane. The peroxide effect is seen only with HBr, not with HCl or HI.

  17. 17

    Question 17

    Write down the products of ozonolysis of 1,2-dimethylbenzene (o-xylene). How does the result support Kekulé's structure for benzene?

    Hard
    3 marks
    Solve with AI
    Written solution

    Ozonolysis of o-xylene gives three products: glyoxal (ethanedial, OHC–CHO), methylglyoxal (2-oxopropanal, CH₃CO–CHO) and dimethylglyoxal (butane-2,3-dione, CH₃CO–COCH₃).

    o-Xylene can be written as two Kekulé structures. Ozonolysis cleaves each C=C bond and turns both of its carbons into C=O groups, so each Kekulé structure gives its own set of products:

    Class 11 Chemistry Hydrocarbon

    Structure I (double bond between the two methyl-bearing carbons) gives 2 mol of 2-oxopropanal and 1 mol of ethanedial.

    Structure II (single bond between the two methyl-bearing carbons) gives 1 mol of butane-2,3-dione and 2 mol of ethanedial.

    No single Kekulé structure can give all three products: butane-2,3-dione can come only from structure II and 2-oxopropanal only from structure I. Since all three are actually obtained, o-xylene (and hence benzene) must be a resonance hybrid of the two Kekulé structures I and II, which supports Kekulé's idea of two structures in rapid equilibrium, now understood as resonance.

  18. 18

    Question 18

    Arrange benzene, n-hexane and ethyne in decreasing order of acidic behaviour. Also give the reason for this behaviour.

    Hard
    2 marks
    Solve with AI
    Written solution

    Order of acidic behaviour: ethyne > benzene > n-hexane.

    The acidic character depends on the ease with which the C–H bond releases H⁺, which depends on the hybridisation of the carbon atom bonded to hydrogen:

    Class 11 Chemistry Hydrocarbon

    CompoundHybridisation of Cs-character
    Ethynesp50%
    Benzenesp²33%
    n-Hexanesp³25%

    s orbitals are held closer to the nucleus than p orbitals, so the greater the s-character of a hybrid orbital, the greater the electronegativity of the carbon. The more electronegative sp carbon of ethyne pulls the C–H bonding electrons strongly towards itself, so the hydrogen is released most easily as a proton. The sp² carbon of benzene does this less, and the sp³ carbon of hexane least. Hence acidity decreases in the order ethyne > benzene > n-hexane.

  19. 19

    Question 19

    Why does benzene undergo electrophilic substitution reactions easily and nucleophilic substitutions with difficulty?

    Medium
    2 marks
    Solve with AI
    Written solution

    Benzene is a planar molecule with six delocalised π electrons forming an electron cloud above and below the plane of the ring. The ring is therefore a rich source of electrons.

    • Electrophiles are electron-deficient species, so they are attracted by this π electron cloud and attack the ring easily. The ring then loses H⁺ to regain its stable aromatic sextet, so substitution (not addition) takes place. Hence benzene readily undergoes electrophilic substitution reactions.
    • Nucleophiles are electron-rich species, so they are repelled by the π electron cloud of the ring. Hence benzene undergoes nucleophilic substitution only with great difficulty.
  20. 20

    Question 20

    How would you convert the following compounds into benzene?

    (i) Ethyne

    (ii) Ethene

    (iii) Hexane

    Hard
    6 marks
    Solve with AI
    Written solution

    (i) Ethyne: cyclic polymerisation. Ethyne passed through a red-hot iron tube at 873 K trimerises to benzene.

    3 HC≡CH→red-hot iron tube, 873 KC6H63\,\text{HC}\equiv\text{CH} \xrightarrow{\text{red-hot iron tube, 873 K}} \text{C}_6\text{H}_6

    (ii) Ethene: first convert ethene into ethyne, then trimerise as in (i).

    Addition of bromine gives 1,2-dibromoethane:

    CH2=CH2+Br2→CCl4BrCH2−CH2Br\text{CH}_2=\text{CH}_2 + \text{Br}_2 \xrightarrow{\text{CCl}_4} \text{BrCH}_2-\text{CH}_2\text{Br}

    Dehydrohalogenation with alcoholic KOH gives vinyl bromide, and sodamide removes a second molecule of HBr to give ethyne:

    BrCH2−CH2Br→alc. KOHCH2=CHBr→NaNH2HC≡CH\text{BrCH}_2-\text{CH}_2\text{Br} \xrightarrow{\text{alc. KOH}} \text{CH}_2=\text{CHBr} \xrightarrow{\text{NaNH}_2} \text{HC}\equiv\text{CH}

    Ethyne is then passed through a red-hot iron tube at 873 K:

    3 HC≡CH→red-hot iron tube, 873 KC6H63\,\text{HC}\equiv\text{CH} \xrightarrow{\text{red-hot iron tube, 873 K}} \text{C}_6\text{H}_6

    (iii) Hexane: aromatisation (reforming). n-Hexane heated to 773 K at 10–20 atm in the presence of oxides of vanadium, molybdenum or chromium supported on alumina is dehydrogenated and cyclised to benzene.

    CH3(CH2)4CH3→773 K, 10–20 atmV2O5 or Mo2O3 or Cr2O3 on Al2O3C6H6+4 H2\text{CH}_3(\text{CH}_2)_4\text{CH}_3 \xrightarrow[\text{773 K, 10–20 atm}]{\text{V}_2\text{O}_5\ \text{or}\ \text{Mo}_2\text{O}_3\ \text{or}\ \text{Cr}_2\text{O}_3\ \text{on Al}_2\text{O}_3} \text{C}_6\text{H}_6 + 4\,\text{H}_2

    The reaction proceeds through cyclohexane: cyclisation of hexane removes one H₂, and aromatisation of cyclohexane removes three more, so 4 H₂ are released in all.

  21. 21

    Question 21

    Write structures of all the alkenes which on hydrogenation give 2-methylbutane.

    Medium
    3 marks
    Solve with AI
    Written solution

    Hydrogenation does not change the carbon skeleton, so the alkenes must have the skeleton of 2-methylbutane:

    CH3−CH(CH3)−CH2−CH3\text{CH}_3-\text{CH}(\text{CH}_3)-\text{CH}_2-\text{CH}_3

    A double bond can be placed between any two adjacent carbons that each still carry at least one hydrogen. The distinct positions are C1=C2, C2=C3 and C3=C4 (a double bond to the methyl branch on C2 is the same as C1=C2). Hence three alkenes are possible:

    Class 11 Chemistry Hydrocarbon

    • CH3CH(CH3)CH=CH2\text{CH}_3\text{CH}(\text{CH}_3)\text{CH}=\text{CH}_2: 3-methylbut-1-ene
    • CH3C(CH3)=CHCH3\text{CH}_3\text{C}(\text{CH}_3)=\text{CH}\text{CH}_3: 2-methylbut-2-ene
    • CH2=C(CH3)CH2CH3\text{CH}_2=\text{C}(\text{CH}_3)\text{CH}_2\text{CH}_3: 2-methylbut-1-ene

    Each of these adds H₂ (Pt, Pd or Ni catalyst) to give 2-methylbutane.

  22. 22

    Question 22

    Arrange the following sets of compounds in order of their decreasing relative reactivity with an electrophile, E⁺.

    (a) Chlorobenzene, 2,4-dinitrochlorobenzene, p-nitrochlorobenzene

    (b) Toluene, p-H3C−C6H4−NO2p\text{-H}_3\text{C}-\text{C}_6\text{H}_4-\text{NO}_2, p-O2N−C6H4−NO2p\text{-O}_2\text{N}-\text{C}_6\text{H}_4-\text{NO}_2

    Hard
    2 marks
    Solve with AI
    Written solution

    Reactivity towards an electrophile increases with the electron density of the ring. Electron-donating groups (such as CH₃) activate the ring; electron-withdrawing groups (such as NO₂, and Cl through its –I effect) deactivate it, and each extra deactivating group lowers the reactivity further.

    (a) Chlorobenzene > p-nitrochlorobenzene > 2,4-dinitrochlorobenzene

    All three contain Cl. p-Nitrochlorobenzene has one strongly electron-withdrawing NO₂ group in addition, and 2,4-dinitrochlorobenzene has two, so the electron density of the ring falls in this order.

    (b) Toluene > p-nitrotoluene > p-dinitrobenzene

    In toluene the CH₃ group donates electrons (+I effect and hyperconjugation), so the ring is electron-rich. In p-nitrotoluene (p-H3C−C6H4−NO2p\text{-H}_3\text{C}-\text{C}_6\text{H}_4-\text{NO}_2) the activating effect of CH₃ is outweighed by the strongly electron-withdrawing NO₂ group. p-Dinitrobenzene (p-O2N−C6H4−NO2p\text{-O}_2\text{N}-\text{C}_6\text{H}_4-\text{NO}_2) has two NO₂ groups and no activating group, so it is the least reactive.

  23. 23

    Question 23

    Out of benzene, m-dinitrobenzene and toluene, which will undergo nitration most easily and why?

    Medium
    2 marks
    Solve with AI
    Written solution

    Toluene undergoes nitration most easily. The order of ease of nitration is toluene > benzene > m-dinitrobenzene.

    Nitration is an electrophilic substitution in which the electrophile is the nitronium ion, NO₂⁺. The more electron-rich the ring, the faster the attack.

    • In toluene, the CH₃ group releases electrons into the ring by the +I effect and hyperconjugation. This activates the ring, so it is attacked by NO₂⁺ more readily than benzene (at the ortho and para positions).
    • Benzene has no substituent and is the reference.
    • In m-dinitrobenzene, the two NO₂ groups strongly withdraw electrons from the ring (–I and –R effects). This deactivates the ring, so nitration is the most difficult.
  24. 24

    Question 24

    Suggest the name of a Lewis acid other than anhydrous aluminium chloride that can be used during the ethylation of benzene.

    Easy
    1 mark
    Solve with AI
    Written solution

    Anhydrous ferric chloride, FeCl₃. (Other Lewis acids such as anhydrous FeBr₃, SnCl₄ or BF₃ can also be used.)

    Ethylation of benzene is a Friedel–Crafts alkylation. The Lewis acid accepts a chloride ion from ethyl chloride and so generates the electrophile, the ethyl carbocation:

    C2H5Cl+FeCl3→C2H5++[FeCl4]−\text{C}_2\text{H}_5\text{Cl} + \text{FeCl}_3 \rightarrow \text{C}_2\text{H}_5^{+} + [\text{FeCl}_4]^{-} C6H6+C2H5Cl→anhyd. FeCl3C6H5C2H5+HCl\text{C}_6\text{H}_6 + \text{C}_2\text{H}_5\text{Cl} \xrightarrow{\text{anhyd. FeCl}_3} \text{C}_6\text{H}_5\text{C}_2\text{H}_5 + \text{HCl}
  25. 25

    Question 25

    Why is the Wurtz reaction not preferred for the preparation of alkanes containing an odd number of carbon atoms? Illustrate your answer by taking one example.

    Medium
    2 marks
    Solve with AI
    Written solution

    In the Wurtz reaction, an alkyl halide is treated with sodium in dry ether, and two alkyl groups join to give an alkane with double the number of carbon atoms of the alkyl halide:

    2 R−X+2 Na→dry etherR−R+2 NaX2\,\text{R}-\text{X} + 2\,\text{Na} \xrightarrow{\text{dry ether}} \text{R}-\text{R} + 2\,\text{NaX}

    With one alkyl halide, R–R always has an even number of carbon atoms. To get an alkane with an odd number of carbon atoms, two different alkyl halides must be used. Then three coupling reactions occur together (R–R, R–R′ and R′–R′), and a mixture of alkanes is obtained instead of the single desired product.

    Example: preparation of propane (3 C) from bromomethane and bromoethane.

    CH3Br+2 Na+BrC2H5→dry etherCH3−C2H5+2 NaBr(propane)\text{CH}_3\text{Br} + 2\,\text{Na} + \text{BrC}_2\text{H}_5 \xrightarrow{\text{dry ether}} \text{CH}_3-\text{C}_2\text{H}_5 + 2\,\text{NaBr} \quad (\text{propane}) CH3Br+2 Na+BrCH3→dry etherCH3−CH3+2 NaBr(ethane)\text{CH}_3\text{Br} + 2\,\text{Na} + \text{BrCH}_3 \xrightarrow{\text{dry ether}} \text{CH}_3-\text{CH}_3 + 2\,\text{NaBr} \quad (\text{ethane}) C2H5Br+2 Na+BrC2H5→dry etherC2H5−C2H5+2 NaBr(butane)\text{C}_2\text{H}_5\text{Br} + 2\,\text{Na} + \text{BrC}_2\text{H}_5 \xrightarrow{\text{dry ether}} \text{C}_2\text{H}_5-\text{C}_2\text{H}_5 + 2\,\text{NaBr} \quad (\text{butane})

    Propane is obtained only as part of a mixture of ethane, propane and butane, which lowers its yield and must be separated. Hence the Wurtz reaction is not preferred for preparing alkanes with an odd number of carbon atoms.

Inside Ch 8

What Class 11 Chemistry Ch 8 covers

The sections of the chapter, in the order the book takes them. Every question above comes from one of these.

  1. 01Classification Of Hydrocarbons
  2. 02Alkanes
  3. 03Chemical Properties of Alkanes
  4. 04Conformations
  5. 05Alkenes
  6. 06Chemical Properties Of Alkenes
Common questions

Class 11 Chemistry Ch 8 questions students ask

How many questions are there in Class 11 Chemistry Ch 8?

25 questions. Every one is solved step by step on this page.

Are these Class 11 Chemistry solutions free?

Yes. Every question and its full working is free to read, with no account needed.

Can I download the Class 11 Chemistry Ch 8 solutions as a PDF?

There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.