Confirming your payment

Skip to content

Opening your dashboard

Class 11 Chemistry Chapter 3: Classification of Elements and Periodicity in Properties Solutions

40 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.

AI Tutor

Get talked through Ch 3, not just shown the answer

Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.

  • Ask it out loud, in your own words
  • It gives you the next step, not the answer
  • Stuck on part (ii)? Start there
Ch 3 solutions

40 questions with solutions

1–5 marks · Mixed difficulty

  1. 1

    Question 1

    What is the basic theme of organisation in the periodic table?

    Easy
    2 marks
    Solve with AI
    Written solution

    The basic theme of the periodic table is to classify the elements so that elements with similar properties fall together.

    In the modern (long form) periodic table the elements are arranged in order of increasing atomic number in horizontal rows called periods and vertical columns called groups. Elements in the same group have similar outer electronic configurations and therefore similar physical and chemical properties, while properties change gradually across a period.

    Because of this arrangement, the study of more than a hundred elements and their compounds becomes simple and systematic: instead of learning every element separately, we learn the properties of a group and the trends along periods and down groups, and the behaviour of an individual element can be predicted from its position.

  2. 2

    Question 2

    Which important property did Mendeleev use to classify the elements in his periodic table and did he stick to that?

    Medium
    2 marks
    Solve with AI
    Written solution

    Mendeleev used the atomic weight (atomic mass) of the elements as the basis of classification. He arranged the elements in order of increasing atomic weight in such a way that elements with similar properties (similar formulas and properties of their compounds) fell in the same vertical column, or group. His periodic law stated that the properties of elements are a periodic function of their atomic weights.

    He did not stick to it strictly. Wherever the order of atomic weights would have put an element among dissimilar elements, he gave priority to similarity of properties, thinking that the measured atomic weight might be wrong. For example, iodine has a lower atomic weight than tellurium, yet he placed iodine after tellurium, in Group VII with fluorine, chlorine and bromine, because its properties resemble theirs; tellurium stayed in Group VI.

    For the same reason he left gaps for undiscovered elements (eka-aluminium and eka-silicon, later found as gallium and germanium) rather than force known elements into wrong groups.

  3. 3

    Question 3

    What is the basic difference in approach between the Mendeleev's Periodic Law and the Modern Periodic Law?

    Easy
    2 marks
    Solve with AI
    Written solution

    The two laws differ in the property taken as the basis of periodicity.

    Mendeleev's Periodic Law: the properties of the elements are a periodic function of their atomic weights. Elements were therefore arranged in order of increasing atomic weight.

    Modern Periodic Law: the physical and chemical properties of the elements are periodic functions of their atomic numbers. Elements are arranged in order of increasing atomic number.

    The change came from Moseley's work (1913): a plot of ν\sqrt{\nu} of the characteristic X-rays of elements against atomic number gave a straight line, whereas a plot against atomic mass did not. This showed that atomic number (the nuclear charge, equal to the number of electrons in the neutral atom) is the more fundamental property. Since the electronic configuration depends on the atomic number, the modern law also removes anomalies of Mendeleev's table such as the Te–I order.

  4. 4

    Question 4

    On the basis of quantum numbers, justify that the sixth period of the periodic table should have 32 elements.

    Hard
    2 marks
    Solve with AI
    Written solution

    The number of elements in a period is twice the number of atomic orbitals available in the energy levels that are filled in that period.

    The sixth period corresponds to n=6n = 6, i.e. it begins with the filling of the 6s orbital. In order of increasing energy, the orbitals filled in this period are

    6s<4f<5d<6p6s < 4f < 5d < 6p

    (the 6d and 6f orbitals are higher in energy than 7s and so are not filled in this period).

    Number of orbitals available:

    • 6s: 1 orbital (l=0l = 0)
    • 4f: 7 orbitals (l=3l = 3)
    • 5d: 5 orbitals (l=2l = 2)
    • 6p: 3 orbitals (l=1l = 1)

    Total = 1 + 7 + 5 + 3 = 16 orbitals.

    By the Pauli exclusion principle each orbital holds at most 2 electrons, so the maximum number of electrons that can be added is 16×2=3216 \times 2 = 32. Each new element adds one electron, so the sixth period contains 32 elements (from Cs, Z = 55, to Rn, Z = 86).

  5. 5

    Question 5

    In terms of period and group where would you locate the element with Z = 114?

    Hard
    2 marks
    Solve with AI
    Written solution

    The seventh period begins after radon (Z = 86), so Z = 114 lies in the seventh period (n=7n = 7).

    Filling order in period 7: 7s (Z = 87, 88), then 6d¹ at Z = 89 (Ac), 5f (Z = 90 to 103), 6d (Z = 104 to 112), and finally 7p (Z = 113 to 118).

    Z = 114 is the second element in which the 7p orbitals are being filled, so its electronic configuration is

    [Rn] 5f14 6d10 7s2 7p2[\text{Rn}]\,5f^{14}\,6d^{10}\,7s^{2}\,7p^{2}

    With outer configuration ns2np2ns^2np^2 it belongs to the p-block, group 14 (the carbon family, below lead).

    Position: period 7, group 14. The element is flerovium (Fl).

  6. 6

    Question 6

    Write the atomic number of the element present in the third period and seventeenth group of the periodic table.

    Medium
    2 marks
    Solve with AI
    Written solution

    Third period means the valence shell is n=3n = 3. Group 17 elements have the outer electronic configuration ns2np5ns^2np^5.

    So the valence configuration is 3s23p53s^2 3p^5 and the complete configuration is

    1s2 2s2 2p6 3s2 3p51s^2\,2s^2\,2p^6\,3s^2\,3p^5

    Total electrons = 2 + 2 + 6 + 2 + 5 = 17. In a neutral atom the atomic number equals the number of electrons, so Z = 17. The element is chlorine (Cl).

  7. 7

    Question 7

    Which element do you think would have been named by

    (i) Lawrence Berkeley Laboratory

    (ii) Seaborg's group?

    Medium
    3 marks
    Solve with AI
    Written solution

    (i) The Lawrence Berkeley Laboratory (Berkeley, California) would name elements after its founder Ernest Lawrence and after the place itself: lawrencium (Lr, Z = 103) and berkelium (Bk, Z = 97).

    (ii) Glenn T. Seaborg's group discovered plutonium and the transuranium elements from 94 to 102; element 106 was named seaborgium (Sg, Z = 106) in his honour.

  8. 8

    Question 8

    Why do elements in the same group have similar physical and chemical properties?

    Medium
    1 mark
    Solve with AI
    Written solution

    The properties of an element depend mainly on its valence (outermost) electrons. Elements in the same group have the same number and the same arrangement of electrons in their outermost orbitals (the same general valence-shell configuration), so they show similar physical and chemical properties. For example, all group 1 elements have the configuration ns1ns^1; each readily loses one electron to form an M+\text{M}^+ ion, and all are reactive metals.

  9. 9

    Question 9

    What does atomic radius and ionic radius really mean to you?

    Medium
    2 marks
    Solve with AI
    Written solution

    Atomic radius is a measure of the size of an atom. Because an atom has no sharp boundary, it is obtained from the distance between nuclei of bonded atoms:

    • Covalent radius (for non-metals): half the distance between the nuclei of two atoms of the element joined by a single covalent bond. For example, the bond distance in Cl2\text{Cl}_2 is 198 pm, so the atomic radius of chlorine is 99 pm.
    • Metallic radius (for metals): half the distance between the nuclei (metal cores) of two adjacent atoms in the metallic crystal. For example, adjacent copper atoms are 256 pm apart, so the metallic radius of copper is 128 pm.

    Ionic radius is the size of an ion (cation or anion). It is estimated from the distances between cations and anions in ionic crystals. A cation is smaller than its parent atom (fewer electrons, same nuclear charge), e.g. Na 186 pm but Na+\text{Na}^+ 95 pm. An anion is larger than its parent atom (more electrons, greater repulsion, same nuclear charge), e.g. F 64 pm but F−\text{F}^- 136 pm.

  10. 10

    Question 10

    How do atomic radius vary in a period and in a group? How do you explain the variation?

    Medium
    2 marks
    Solve with AI
    Written solution

    Across a period (left to right) the atomic radius decreases. For period 2 (Table 3.6): Li 152, Be 111, B 88, C 77, N 74, O 66, F 64 pm.

    Within a period the outer electrons are added to the same valence shell, so the shielding by inner electrons hardly increases. Meanwhile the nuclear charge increases by one unit at each step. The effective nuclear charge felt by the outer electrons therefore increases, they are pulled closer to the nucleus, and the atom becomes smaller.

    Down a group the atomic radius increases. For group 1: Li 152, Na 186, K 231, Rb 244, Cs 262 pm; for group 17: F 64, Cl 99, Br 114, I 133, At 140 pm.

    Going down a group, the principal quantum number nn of the valence shell increases by one at each step, so the valence electrons are farther from the nucleus. The filled inner shells also shield the outer electrons from the nucleus. These effects outweigh the increase in nuclear charge, so the size increases.

    Class 11 Chemistry Classification of Elements and Periodicity in Properties

  11. 11

    Question 11

    What do you understand by isoelectronic species? Name a species that will be isoelectronic with each of the following atoms or ions.

    (i) F−\text{F}^-

    (ii) Ar

    (iii) Mg2+\text{Mg}^{2+}

    (iv) Rb+\text{Rb}^+

    Medium
    5 marks
    Solve with AI
    Written solution

    Isoelectronic species are atoms or ions that contain the same number of electrons (and hence the same electronic configuration), although their nuclear charges are different. For example, O2−\text{O}^{2-}, F−\text{F}^-, Na+\text{Na}^+ and Mg2+\text{Mg}^{2+} all have 10 electrons.

    (i) F−\text{F}^-: 9 + 1 = 10 electrons. Isoelectronic species: Ne (also Na+\text{Na}^+, O2−\text{O}^{2-}, Mg2+\text{Mg}^{2+}).

    (ii) Ar: 18 electrons. Isoelectronic species: K+\text{K}^+ (also Cl−\text{Cl}^-, S2−\text{S}^{2-}, Ca2+\text{Ca}^{2+}).

    (iii) Mg2+\text{Mg}^{2+}: 12 − 2 = 10 electrons. Isoelectronic species: Na+\text{Na}^+ (also Ne, F−\text{F}^-, Al3+\text{Al}^{3+}).

    (iv) Rb+\text{Rb}^+: 37 − 1 = 36 electrons. Isoelectronic species: Kr (also Br−\text{Br}^-, Sr2+\text{Sr}^{2+}).

  12. 12

    Question 12

    Consider the following species:

    N3−\text{N}^{3-}, O2−\text{O}^{2-}, F−\text{F}^-, Na+\text{Na}^+, Mg2+\text{Mg}^{2+} and Al3+\text{Al}^{3+}

    (a) What is common in them?

    (b) Arrange them in the order of increasing ionic radii.

    Medium
    2 marks
    Solve with AI
    Written solution

    (a) Each species has 10 electrons (N: 7 + 3, O: 8 + 2, F: 9 + 1, Na: 11 − 1, Mg: 12 − 2, Al: 13 − 3), all with the configuration 1s22s22p61s^2 2s^2 2p^6. They are isoelectronic species.

    (b) In isoelectronic species the same 10 electrons are held by different nuclear charges: N 7, O 8, F 9, Na 11, Mg 12, Al 13. The greater the nuclear charge, the more strongly the electrons are pulled in and the smaller the ion. Increasing order of ionic radii:

    Al3+<Mg2+<Na+<F−<O2−<N3−\text{Al}^{3+} < \text{Mg}^{2+} < \text{Na}^{+} < \text{F}^{-} < \text{O}^{2-} < \text{N}^{3-}
  13. 13

    Question 13

    Explain why cation are smaller and anions larger in radii than their parent atoms?

    Medium
    2 marks
    Solve with AI
    Written solution

    Cations are smaller than their parent atoms. A cation is formed by removing one or more electrons while the nuclear charge stays the same. The remaining electrons are attracted more strongly by the same nuclear charge (the effective nuclear charge per electron increases) and the electron–electron repulsion decreases, so the electron cloud contracts. Often the whole outermost shell is lost as well. For example, Na (2,8,12,8,1) has radius 186 pm, while Na+\text{Na}^+ (2,82,8) has only 95 pm.

    Anions are larger than their parent atoms. An anion is formed by adding one or more electrons while the nuclear charge stays the same. The added electrons increase the electron–electron repulsion, and the same nuclear charge now has to hold more electrons, so the effective nuclear charge per electron decreases and the electron cloud expands. For example, F has radius 64 pm, while F−\text{F}^- has 136 pm.

  14. 14

    Question 14

    What is the significance of the terms — 'isolated gaseous atom' and 'ground state' while defining the ionization enthalpy and electron gain enthalpy?

    Hint: Requirements for comparison purposes.

    Medium
    2 marks
    Solve with AI
    Written solution

    Both terms make sure that the values measured for different elements can be compared fairly: they describe the property of the atom itself, under the same standard conditions.

    Isolated gaseous atom: in the gaseous state the atoms are far apart, so an atom is free from the attractions and repulsions of neighbouring atoms. In a solid or liquid these interatomic forces (and bonding) would change the energy needed to remove or add an electron. Taking an isolated gaseous atom means the value reflects only the attraction between that atom's nucleus and the electron.

    Ground state: the ground state is the most stable, lowest-energy electronic configuration of the atom. If the atom were in an excited state, its electron would already be at a higher energy, so less energy would be needed to remove it (and the energy released on adding an electron would also differ). Specifying the ground state fixes a definite starting energy, so the values are reproducible and comparable from element to element.

  15. 15

    Question 15

    Energy of an electron in the ground state of the hydrogen atom is −2.18×10−18 J-2.18 \times 10^{-18}\ \text{J}. Calculate the ionization enthalpy of atomic hydrogen in terms of J mol−1\text{J mol}^{-1}.

    Hint: Apply the idea of mole concept to derive the answer.

    Hard
    3 marks
    Solve with AI
    Written solution

    Given: energy of the electron in the ground state, E1=−2.18×10−18 JE_1 = -2.18 \times 10^{-18}\ \text{J}. When the electron is removed completely (n=∞n = \infty), its energy is E∞=0E_\infty = 0.

    Energy needed to ionize one hydrogen atom:

    ΔE=E∞−E1=0−(−2.18×10−18 J)=2.18×10−18 J per atom\Delta E = E_\infty - E_1 = 0 - (-2.18 \times 10^{-18}\ \text{J}) = 2.18 \times 10^{-18}\ \text{J per atom}

    Ionization enthalpy refers to one mole of atoms, so multiply by the Avogadro constant NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\ \text{mol}^{-1}:

    ΔiH=ΔE×NA=(2.18×10−18 J)×(6.022×1023 mol−1)\Delta_i H = \Delta E \times N_A = (2.18 \times 10^{-18}\ \text{J}) \times (6.022 \times 10^{23}\ \text{mol}^{-1}) ΔiH=1.312796×106 J mol−1≈1.31×106 J mol−1\Delta_i H = 1.312796 \times 10^{6}\ \text{J mol}^{-1} \approx 1.31 \times 10^{6}\ \text{J mol}^{-1}

    The ionization enthalpy of atomic hydrogen is 1.31×106 J mol−11.31 \times 10^{6}\ \text{J mol}^{-1}, i.e. 1.31×103 kJ mol−11.31 \times 10^{3}\ \text{kJ mol}^{-1}.

  16. 16

    Question 16

    Among the second period elements the actual ionization enthalpies are in the order Li < B < Be < C < O < N < F < Ne.

    Explain why

    (i) Be has higher ΔiH\Delta_i H than B

    (ii) O has lower ΔiH\Delta_i H than N and F?

    Medium
    3 marks
    Solve with AI
    Written solution

    First ionization enthalpies (kJ mol⁻¹): Li 520, Be 899, B 801, C 1086, N 1402, O 1314, F 1681, Ne 2080. Generally ΔiH\Delta_i H rises across the period as nuclear charge increases, but there are two dips.

    Class 11 Chemistry Classification of Elements and Periodicity in Properties

    (i) Be is 1s22s21s^2 2s^2 and B is 1s22s22p11s^2 2s^2 2p^1. In Be the electron removed is a 2s electron; in B it is a 2p electron. Within the same shell an s electron penetrates closer to the nucleus than a p electron, so it is attracted more strongly. The 2p electron of boron is also well shielded from the nucleus by the inner electrons, including the filled 2s pair. So it is easier to remove the 2p electron of B than a 2s electron of Be, and B (801) has a lower ΔiH\Delta_i H than Be (899) even though its nuclear charge is greater.

    (ii) O lower than N: nitrogen is 2s22p32s^2 2p^3, with its three 2p electrons in three different 2p orbitals (Hund's rule) and no pairing. Oxygen is 2s22p42s^2 2p^4, so two of its four 2p electrons must share the same orbital. The extra electron–electron repulsion in that doubly occupied orbital makes the fourth 2p electron of oxygen easier to remove. So O (1314) has a lower value than N (1402).

    O lower than F: fluorine (2s22p52s^2 2p^5) has a higher nuclear charge (+9 against +8) and a smaller atom, and its 2p electrons are in the same shell, so they are held more tightly. The increase in nuclear charge outweighs the shielding, so F (1681) has a much higher value than O (1314).

  17. 17

    Question 17

    How would you explain the fact that the first ionization enthalpy of sodium is lower than that of magnesium but its second ionization enthalpy is higher than that of magnesium?

    Medium
    2 marks
    Solve with AI
    Written solution

    Na: [Ne] 3s1[\text{Ne}]\,3s^1 (Z = 11). Mg: [Ne] 3s2[\text{Ne}]\,3s^2 (Z = 12). Values (kJ mol⁻¹): Na ΔiH1\Delta_i H_1 = 496, ΔiH2\Delta_i H_2 ≈ 4562; Mg ΔiH1\Delta_i H_1 = 737, ΔiH2\Delta_i H_2 ≈ 1450.

    First ionization enthalpy, Na < Mg. In both atoms the first electron removed is a 3s electron from the same shell. Magnesium has a greater nuclear charge (+12 against +11) and a smaller atom (160 pm against 186 pm), so its 3s electrons are held more tightly. Hence ΔiH1\Delta_i H_1(Mg) > ΔiH1\Delta_i H_1(Na).

    Second ionization enthalpy, Na > Mg. After losing one electron, Na+\text{Na}^+ has the stable noble gas configuration 1s22s22p61s^2 2s^2 2p^6. Its second electron must come from the inner 2p orbital (n = 2), which is much closer to the nucleus and very poorly shielded, so a very large amount of energy is needed. Mg+\text{Mg}^+ is [Ne] 3s1[\text{Ne}]\,3s^1; its second electron is still a valence 3s electron, removed relatively easily, and its removal gives the stable [Ne][\text{Ne}] configuration. Hence ΔiH2\Delta_i H_2(Na) ≫ ΔiH2\Delta_i H_2(Mg).

  18. 18

    Question 18

    What are the various factors due to which the ionization enthalpy of the main group elements tends to decrease down a group?

    Medium
    3 marks
    Solve with AI
    Written solution

    Down a group the nuclear charge increases, which by itself would raise the ionization enthalpy. The ionization enthalpy nevertheless decreases (for group 1: Li 520, Na 496, K 419, Rb 403, Cs 376 kJ mol⁻¹) because two other factors outweigh it:

    (i) Increase in atomic size. At each step down a group a new shell is added (the principal quantum number nn of the valence shell increases by one). The valence electron is therefore farther from the nucleus and is attracted less strongly, so less energy is needed to remove it.

    (ii) Increase in the shielding (screening) effect. The number of filled inner shells increases down the group. These inner electrons shield the valence electron from the nucleus, so the valence electron does not feel the full increase in nuclear charge.

    The combined effect of greater distance and greater shielding outweighs the increase in nuclear charge, so the outermost electron is held less tightly and the ionization enthalpy decreases down a group.

  19. 19

    Question 19

    The first ionization enthalpy values (in kJ mol−1\text{kJ mol}^{-1}) of group 13 elements are:

    BAlGaInTl
    801577579558589

    How would you explain this deviation from the general trend?

    Medium
    2 marks
    Solve with AI
    Written solution

    Normally ΔiH\Delta_i H decreases down a group, because size and shielding increase. In group 13 this holds only from B to Al (801 → 577) and from Ga to In (579 → 558).

    Class 11 Chemistry Classification of Elements and Periodicity in Properties

    Ga is slightly higher than Al. Gallium comes after the ten 3d elements, so it has ten 3d electrons in its inner shell. d electrons shield the nuclear charge poorly. The extra nuclear charge (+31 against +13) is therefore not fully screened, the 4p electron of Ga is held more tightly than expected, and ΔiH\Delta_i H does not decrease: Ga 579 against Al 577.

    In is lower than Ga. Indium also has ten d electrons (4d) in its inner shell, as gallium has 3d, so the shielding situation is similar. The added shell and larger size win, and ΔiH\Delta_i H falls to 558.

    Tl is higher than In. Thallium comes after the fourteen 4f electrons as well as the ten 5d electrons. f electrons shield even more poorly than d electrons, so the outer 6p electron of Tl feels a much larger effective nuclear charge. It is held more tightly, and ΔiH\Delta_i H rises to 589, above that of In.

    Thus the irregularity arises from the poor shielding of the nuclear charge by the intervening d and f electrons.

  20. 20

    Question 20

    Which of the following pairs of elements would have a more negative electron gain enthalpy?

    (i) O or F

    (ii) F or Cl

    Medium
    2 marks
    Solve with AI
    Written solution

    (i) F. O and F are in the same period. F has a higher nuclear charge and a smaller atom, so an added electron comes closer to a more positive nucleus. F also attains the stable noble gas configuration (2s22p62s^2 2p^6) by gaining one electron, while O needs two. So ΔegH\Delta_{eg}H of F (−328 kJ mol⁻¹) is much more negative than that of O (−141 kJ mol⁻¹).

    (ii) Cl. Normally ΔegH\Delta_{eg}H becomes less negative down a group, but F is an exception. In F the added electron enters the small n=2n = 2 shell, which is already crowded with seven electrons, and it suffers strong electron–electron repulsion. In Cl it enters the larger n=3n = 3 shell, where the electron cloud is spread over more space and the repulsion is much less. So Cl (−349 kJ mol⁻¹) has a more negative electron gain enthalpy than F (−328 kJ mol⁻¹).

  21. 21

    Question 21

    Would you expect the second electron gain enthalpy of O as positive, more negative or less negative than the first? Justify your answer.

    Medium
    2 marks
    Solve with AI
    Written solution

    The second electron gain enthalpy of oxygen is expected to be positive.

    First step: O(g)+e−→O−(g)\text{O(g)} + e^- \rightarrow \text{O}^-\text{(g)}, ΔegH1=−141 kJ mol−1\Delta_{eg}H_1 = -141\ \text{kJ mol}^{-1}. A neutral atom attracts the incoming electron to its nucleus, so energy is released (negative value).

    Second step: O−(g)+e−→O2−(g)\text{O}^-\text{(g)} + e^- \rightarrow \text{O}^{2-}\text{(g)}. Now the electron is being added to an ion that is already negatively charged. The incoming electron is strongly repelled by the negative charge of O−\text{O}^-, and this repulsion outweighs the attraction of the nucleus. Energy must therefore be supplied to force the second electron in, so ΔegH2\Delta_{eg}H_2 is positive (endothermic).

  22. 22

    Question 22

    What is the basic difference between the terms electron gain enthalpy and electronegativity?

    Medium
    2 marks
    Solve with AI
    Written solution

    Electron gain enthalpy is the enthalpy change when an electron is added to an isolated gaseous atom in its ground state to form a negative ion, X(g)+e−→X−(g)\text{X(g)} + e^- \rightarrow \text{X}^-\text{(g)}. It is a measurable energy, expressed in kJ mol−1\text{kJ mol}^{-1}, and has a definite value for each element.

    Electronegativity is the ability of an atom in a chemical compound (a bonded atom) to attract the shared pair of electrons of a covalent bond towards itself. It is a qualitative idea, not a measurable quantity; it is expressed on a relative scale without units (e.g. Pauling scale, F = 4.0), and its value for an element can vary with the atom it is bonded to.

    In short: electron gain enthalpy refers to an isolated atom gaining a free electron, while electronegativity refers to a bonded atom attracting a shared electron pair.

  23. 23

    Question 23

    How would you react to the statement that the electronegativity of N on Pauling scale is 3.0 in all the nitrogen compounds?

    Medium
    2 marks
    Solve with AI
    Written solution

    The statement is not correct.

    The value 3.0 is only an approximate, average value assigned to nitrogen on the Pauling scale so that elements can be compared. Electronegativity is not a measurable property of an isolated atom; it describes the pull of an atom on shared electrons in a particular compound. NCERT notes that the electronegativity of an element is not constant; it varies with the element to which it is bound.

    So the effective electronegativity of nitrogen changes from one compound to another. It depends on:

    • the atoms bonded to nitrogen (for example, N bonded to fluorine in NF3\text{NF}_3 is in a different environment from N bonded to hydrogen in NH3\text{NH}_3);
    • the oxidation state of nitrogen (an atom in a higher oxidation state attracts electrons more strongly);
    • the hybridisation of nitrogen (greater s character makes it attract electrons more strongly).

    Hence nitrogen cannot have exactly the same electronegativity, 3.0, in all its compounds.

  24. 24

    Question 24

    Describe the theory associated with the radius of an atom as it

    (a) gains an electron

    (b) loses an electron

    Medium
    2 marks
    Solve with AI
    Written solution

    (a) Gains an electron (forms an anion): the radius increases. The number of electrons increases by one while the nuclear charge stays the same. The electron–electron repulsion increases, and the same nuclear charge has to hold more electrons, so the effective nuclear charge per electron decreases. The electron cloud expands. Example: F 64 pm, F−\text{F}^- 136 pm.

    (b) Loses an electron (forms a cation): the radius decreases. The number of electrons decreases by one while the nuclear charge stays the same. The electron–electron repulsion decreases and the effective nuclear charge per electron increases, so the remaining electrons are pulled closer to the nucleus. If the whole outer shell is lost, the decrease is even larger. Example: Na 186 pm, Na+\text{Na}^+ 95 pm.

  25. 25

    Question 25

    Would you expect the first ionization enthalpies for two isotopes of the same element to be the same or different? Justify your answer.

    Medium
    2 marks
    Solve with AI
    Written solution

    They would be the same.

    Ionization enthalpy depends on how strongly the outermost electron is held. This is decided by the nuclear charge (number of protons) and the number and arrangement of electrons (size, shielding). Isotopes of an element have the same atomic number, so they have the same number of protons and electrons and the same electronic configuration. They differ only in the number of neutrons, i.e. in nuclear mass. Neutrons carry no charge and do not change the attraction between the nucleus and the electrons. Hence two isotopes have the same first ionization enthalpy.

  26. 26

    Question 26

    What are the major differences between metals and non-metals?

    Hard
    5 marks
    Solve with AI
    Written solution

    Metals make up more than 78% of the known elements and lie on the left side and in the centre of the periodic table; non-metals lie at the top right.

    PropertyMetalsNon-metals
    Physical stateUsually solids at room temperature (mercury is a liquid)Solids or gases (bromine is a liquid)
    Melting and boiling pointsUsually highUsually low (boron and carbon are exceptions)
    LustreShiny (metallic lustre)Mostly dull (iodine and graphite are shiny)
    Malleability and ductilityMalleable and ductileSolids are brittle; neither malleable nor ductile
    ConductionGood conductors of heat and electricityPoor conductors (graphite is an exception)
    Ionization enthalpyLow; lose electrons easilyHigh; do not lose electrons easily
    Electron gain enthalpy and electronegativitySmall; low electronegativityLarge negative electron gain enthalpy; high electronegativity
    Ions formedPositive ions (electropositive), e.g. Na+\text{Na}^+, Mg2+\text{Mg}^{2+}Negative ions (electronegative), e.g. Cl−\text{Cl}^-, O2−\text{O}^{2-}
    Nature of oxidesBasic (e.g. Na2O\text{Na}_2\text{O}, MgO); a few amphoteric (e.g. Al2O3\text{Al}_2\text{O}_3)Acidic (e.g. Cl2O7\text{Cl}_2\text{O}_7, SO3\text{SO}_3) or neutral (e.g. CO, NO)
    Action as agentsReducing agentsOxidizing agents (mostly)

    These differences trace back to electronic configuration: metals have few valence electrons and low ionization enthalpies, so they tend to lose electrons; non-metals have nearly complete valence shells and high electronegativity, so they tend to gain or share electrons.

  27. 27

    Question 27

    Use the periodic table to answer the following questions.

    (a) Identify an element with five electrons in the outer subshell.

    (b) Identify an element that would tend to lose two electrons.

    (c) Identify an element that would tend to gain two electrons.

    (d) Identify the group having metal, non-metal, liquid as well as gas at the room temperature.

    Hard
    4 marks
    Solve with AI
    Written solution

    (a) Five electrons in the outer subshell means an np5np^5 configuration (ns2np5ns^2np^5), i.e. a group 17 element: chlorine (3s23p53s^2 3p^5); likewise F, Br or I.

    (b) An element with two valence electrons, ns2ns^2, loses them to form an M2+\text{M}^{2+} ion: a group 2 element, e.g. magnesium ([Ne] 3s2→Mg2+[\text{Ne}]\,3s^2 \rightarrow \text{Mg}^{2+}); likewise Ca or Ba.

    (c) An element with six valence electrons, ns2np4ns^2np^4, gains two to complete its octet: a group 16 element, e.g. oxygen (O2−\text{O}^{2-}) or sulphur (S2−\text{S}^{2-}).

    (d) Group 17 (halogens). Fluorine and chlorine are gases and bromine is a liquid at room temperature; iodine is a solid. F, Cl, Br and I are non-metals (iodine only shows a metallic lustre), while the heaviest member, astatine, is radioactive and shows metallic character. So group 17 has gases, a liquid, non-metals and a metallic member.

  28. 28

    Question 28

    The increasing order of reactivity among group 1 elements is Li < Na < K < Rb < Cs whereas that among group 17 elements is F > Cl > Br > I. Explain.

    Medium
    4 marks
    Solve with AI
    Written solution

    The two groups react in opposite ways, so their reactivity depends on opposite tendencies.

    Group 1 (alkali metals), reactivity increases down the group. These elements have one valence electron (ns1ns^1) and react by losing it to form M+\text{M}^+ ions. Down the group the atomic size increases (Li 152 → Cs 262 pm) and the shielding by inner shells increases, so the valence electron is held less tightly and the ionization enthalpy decreases (Li 520, Na 496, K 419, Rb 403, Cs 376 kJ mol⁻¹). The easier the electron is lost, the more reactive the metal. Hence Li < Na < K < Rb < Cs.

    Group 17 (halogens), reactivity decreases down the group. These elements have seven valence electrons (ns2np5ns^2np^5) and react by gaining one electron (or attracting a shared pair) to complete the octet. Down the group the atomic size increases (F 64 → I 133 pm), so the nucleus attracts an incoming electron less strongly. Electronegativity falls (F 4.0, Cl 3.0, Br 2.8, I 2.5) and electron gain enthalpy becomes less negative from Cl to I (−349, −325, −295 kJ mol⁻¹). Their oxidizing power, and hence reactivity, therefore decreases: F > Cl > Br > I.

    Fluorine is the most reactive even though its electron gain enthalpy (−328) is slightly less negative than that of chlorine (−349). Fluorine is the most electronegative element, its small atom attracts electrons most strongly, and the F–F bond is weak and easily broken.

  29. 29

    Question 29

    Write the general outer electronic configuration of s-, p-, d- and f- block elements.

    Medium
    2 marks
    Solve with AI
    Written solution
    • s-block (groups 1 and 2): ns1−2ns^{1-2}
    • p-block (groups 13 to 18): ns2np1−6ns^2np^{1-6} (helium, 1s21s^2, is placed with group 18)
    • d-block (groups 3 to 12): (n−1)d1−10 ns0−2(n-1)d^{1-10}\,ns^{0-2} (the ns0ns^0 case is Pd, 4d105s04d^{10}5s^0)
    • f-block (lanthanoids and actinoids): (n−2)f1−14 (n−1)d0−1 ns2(n-2)f^{1-14}\,(n-1)d^{0-1}\,ns^2

    Here nn is the outermost (valence) shell, which equals the period number.

    Class 11 Chemistry Classification of Elements and Periodicity in Properties

  30. 30

    Question 30

    Assign the position of the element having outer electronic configuration

    (i) ns2np4ns^2np^4 for n=3n = 3

    (ii) (n−1)d2ns2(n-1)d^2ns^2 for n=4n = 4, and

    (iii) (n−2)f7(n−1)d1ns2(n-2)f^7(n-1)d^1ns^2 for n=6n = 6, in the periodic table.

    Hard
    3 marks
    Solve with AI
    Written solution

    (i) 3s23p43s^2 3p^4: full configuration 1s22s22p63s23p41s^2 2s^2 2p^6 3s^2 3p^4, Z = 16. The last electron enters a p orbital, so it is a p-block element. Period = 3 (n=3n = 3). For a p-block element, group = 10 + number of valence electrons = 10 + 6 = 16. The element is sulphur (S): period 3, group 16.

    (ii) 3d24s23d^2 4s^2: full configuration [Ar] 3d24s2[\text{Ar}]\,3d^2 4s^2, Z = 18 + 4 = 22. The last electron enters a d orbital, so it is a d-block element. Period = 4. Group = (n − 1)d electrons + ns electrons = 2 + 2 = 4. The element is titanium (Ti): period 4, group 4.

    (iii) 4f75d16s24f^7 5d^1 6s^2: full configuration [Xe] 4f75d16s2[\text{Xe}]\,4f^7 5d^1 6s^2, Z = 54 + 10 = 64. The 4f orbitals are being filled, so it is an f-block element (a lanthanoid). Period = 6. The lanthanoids occupy the group 3 position (they are shown in a separate row at the bottom of the table). The element is gadolinium (Gd): period 6, group 3, f-block.

  31. 31

    Question 31

    The first (ΔiH1\Delta_i H_1) and the second (ΔiH2\Delta_i H_2) ionization enthalpies (in kJ mol−1\text{kJ mol}^{-1}) and the (ΔegH\Delta_{eg}H) electron gain enthalpy (in kJ mol−1\text{kJ mol}^{-1}) of a few elements are given below:

    ElementsΔiH1\Delta_i H_1ΔiH2\Delta_i H_2ΔegH\Delta_{eg}H
    I5207300−60
    II4193051−48
    III16813374−328
    IV10081846−295
    V23725251+48
    VI7381451−40

    Which of the above elements is likely to be:

    (a) the least reactive element.

    (b) the most reactive metal.

    (c) the most reactive non-metal.

    (d) the least reactive non-metal.

    (e) the metal which can form a stable binary halide of the formula MX2\text{MX}_2 (X = halogen).

    (f) the metal which can form a predominantly stable covalent halide of the formula MX (X = halogen)?

    Hard
    5 marks
    Solve with AI
    Written solution

    Low ΔiH1\Delta_i H_1 means a metal (loses electrons easily); high ΔiH1\Delta_i H_1 together with a large negative ΔegH\Delta_{eg}H means a reactive non-metal.

    (a) Element V. It has the highest ΔiH1\Delta_i H_1 (2372) and a positive ΔegH\Delta_{eg}H (+48), so it neither loses nor gains electrons readily. It is a noble gas (the data are those of helium) and is the least reactive.

    (b) Element II. It has the lowest ΔiH1\Delta_i H_1 (419), so it loses its electron most easily. The very large jump to ΔiH2\Delta_i H_2 (3051) shows one valence electron, i.e. an alkali metal (potassium). It is the most reactive metal.

    (c) Element III. It has a high ΔiH1\Delta_i H_1 (1681) and the most negative ΔegH\Delta_{eg}H (−328), so it gains an electron most readily. It is a halogen (fluorine), the most reactive non-metal.

    (d) Element IV. It also has a high ΔiH1\Delta_i H_1 (1008) and a large negative ΔegH\Delta_{eg}H (−295), so it is a non-metal (a halogen, iodine). Its ΔegH\Delta_{eg}H is less negative than that of III, so it is less reactive. Among the reactive non-metals it is the least reactive (V, the noble gas, is the answer to (a)).

    (e) Element VI. Its ΔiH1\Delta_i H_1 (738) and ΔiH2\Delta_i H_2 (1451) are both fairly low, and there is no very large jump between them. So it can lose two electrons to form M2+\text{M}^{2+}: it is an alkaline earth metal (magnesium) and forms a stable halide MX2\text{MX}_2, e.g. MgCl2\text{MgCl}_2.

    (f) Element I. It has a low ΔiH1\Delta_i H_1 (520) but a huge ΔiH2\Delta_i H_2 (7300), so it forms only M+\text{M}^+ ions and halides of formula MX. Among the alkali metals it has the highest ΔiH1\Delta_i H_1, so it is lithium. Lithium is the first member of group 1: it has a very small size and a high charge/radius ratio. Like the other anomalous second-period elements, it forms compounds with pronounced covalent character. Element I therefore forms a predominantly covalent halide MX (e.g. LiI).

  32. 32

    Question 32

    Predict the formulas of the stable binary compounds that would be formed by the combination of the following pairs of elements.

    (a) Lithium and oxygen

    (b) Magnesium and nitrogen

    (c) Aluminium and iodine

    (d) Silicon and oxygen

    (e) Phosphorus and fluorine

    (f) Element 71 and fluorine

    Medium
    5 marks
    Solve with AI
    Written solution

    The valence of a representative element equals the number of valence electrons or eight minus that number. Balance the valences to get the formula.

    (a) Li (group 1, valence 1) and O (group 16, valence 2): Li2O\text{Li}_2\text{O}

    (b) Mg (group 2, valence 2) and N (group 15, valence 3): Mg3N2\text{Mg}_3\text{N}_2

    (c) Al (group 13, valence 3) and I (group 17, valence 1): AlI3\text{AlI}_3

    (d) Si (group 14, valence 4) and O (valence 2): SiO2\text{SiO}_2

    (e) P (group 15, valence 3 or 5) and F (valence 1): PF3\text{PF}_3 and PF5\text{PF}_5

    (f) Element 71 is lutetium (Lu), the last lanthanoid, [Xe] 4f145d16s2[\text{Xe}]\,4f^{14}5d^16s^2, with the common oxidation state +3; F has valence 1: LuF3\text{LuF}_3

  33. 33

    Question 33

    In the modern periodic table, the period indicates the value of:

    MCQMedium
    1 mark
    Solve with AI
    Answer
    • (A) atomic number

    • (B) atomic mass

    • (C) principal quantum number

      Correct
    • (D) azimuthal quantum number

    Option (C) is correct.

    Explanation: Each period begins with the filling of a new shell, and the period number equals the highest principal quantum number (nn) of the elements in it, i.e. the nn of the valence shell. For example, period 3 elements (Na to Ar) have their valence electrons in n=3n = 3.

    • (A) is wrong: atomic number increases by one from element to element along a period; it does not stay fixed for a period.
    • (B) is wrong: atomic mass is not the basis of the modern table and differs for every element in a period.
    • (D) is wrong: the azimuthal quantum number ll tells the subshell (s, p, d, f) being filled, which decides the block, not the period.
  34. 34

    Question 34

    Which of the following statements related to the modern periodic table is incorrect?

    MCQMedium
    1 mark
    Solve with AI
    Answer
    • (A) The p-block has 6 columns, because a maximum of 6 electrons can occupy all the orbitals in a p-shell.

    • (B) The d-block has 8 columns, because a maximum of 8 electrons can occupy all the orbitals in a d-subshell.

      Correct
    • (C) Each block contains a number of columns equal to the number of electrons that can occupy that subshell.

    • (D) The block indicates value of azimuthal quantum number (ll) for the last subshell that received electrons in building up the electronic configuration.

    Option (B) is correct.

    Explanation: A d subshell has 5 orbitals, so it can hold a maximum of 5×2=105 \times 2 = 10 electrons. The d-block therefore has 10 columns (groups 3 to 12), not 8, so statement (B) is the incorrect one.

    • (A) is a correct statement: a p subshell has 3 orbitals holding 6 electrons, and the p-block has 6 columns (groups 13 to 18).
    • (C) is a correct statement: s-block 2, p-block 6, d-block 10 and f-block 14 columns, equal to the capacities 2, 6, 10 and 14 of the s, p, d and f subshells.
    • (D) is a correct statement: the block is named after the subshell receiving the last electron (ll = 0, 1, 2, 3 for s, p, d, f).
  35. 35

    Question 35

    Anything that influences the valence electrons will affect the chemistry of the element. Which one of the following factors does not affect the valence shell?

    MCQMedium
    1 mark
    Solve with AI
    Answer
    • (A) Valence principal quantum number (nn)

    • (B) Nuclear charge (ZZ)

    • (C) Nuclear mass

      Correct
    • (D) Number of core electrons

    Option (C) is correct.

    Explanation: Nuclear mass depends on the number of protons and neutrons. Neutrons are uncharged, so changing the number of neutrons (and hence the mass) does not change the attraction between the nucleus and the valence electrons. Isotopes, which differ only in nuclear mass, have the same chemistry.

    • (A) is wrong: a larger nn puts the valence electrons farther from the nucleus, so they are held less tightly.
    • (B) is wrong: a larger nuclear charge attracts the valence electrons more strongly.
    • (D) is wrong: core electrons shield the valence electrons from the nucleus, reducing the effective nuclear charge they feel.
  36. 36

    Question 36

    The size of isoelectronic species — F−\text{F}^-, Ne and Na+\text{Na}^+ is affected by

    MCQMedium
    1 mark
    Solve with AI
    Answer
    • (A) nuclear charge (ZZ)

      Correct
    • (B) valence principal quantum number (nn)

    • (C) electron-electron interaction in the outer orbitals

    • (D) none of the factors because their size is the same

    Option (A) is correct.

    Explanation: F−\text{F}^-, Ne and Na+\text{Na}^+ each have 10 electrons (1s22s22p61s^2 2s^2 2p^6). The only thing that differs among them is the nuclear charge: 9, 10 and 11. The greater the nuclear charge, the more strongly the same 10 electrons are pulled in, so size decreases as ZZ increases: F−>Ne>Na+\text{F}^- > \text{Ne} > \text{Na}^+.

    • (B) is wrong: the valence shell is n=2n = 2 for all three, so it cannot account for their size difference.
    • (C) is wrong: all three have the same electrons in the same orbitals, so the electron–electron interaction does not make their sizes differ.
    • (D) is wrong: their sizes are not the same (e.g. F−\text{F}^- is 136 pm, Na+\text{Na}^+ is 95 pm).
  37. 37

    Question 37

    Which one of the following statements is incorrect in relation to ionization enthalpy?

    MCQHard
    1 mark
    Solve with AI
    Answer
    • (A) Ionization enthalpy increases for each successive electron.

    • (B) The greatest increase in ionization enthalpy is experienced on removal of electron from core noble gas configuration.

    • (C) End of valence electrons is marked by a big jump in ionization enthalpy.

    • (D) Removal of electron from orbitals bearing lower nn value is easier than from orbital having higher nn value.

      Correct

    Option (D) is correct.

    Explanation: Electrons in orbitals with lower nn are closer to the nucleus and less shielded, so they are held more strongly. Removing an electron from a lower-nn orbital is therefore harder, not easier, than from a higher-nn orbital, so statement (D) is the incorrect one.

    • (A) is a correct statement: after each removal the remaining electrons are held by a more positive ion, so ΔiH1<ΔiH2<ΔiH3\Delta_i H_1 < \Delta_i H_2 < \Delta_i H_3 and so on.
    • (B) is a correct statement: removing an electron from a stable noble gas core needs a very large amount of energy, e.g. Na: 496 then about 4562 kJ mol⁻¹.
    • (C) is a correct statement: once all valence electrons are removed, the next comes from the core, so a big jump marks the end of the valence electrons.
  38. 38

    Question 38

    Considering the elements B, Al, Mg, and K, the correct order of their metallic character is:

    MCQHard
    1 mark
    Solve with AI
    Answer
    • (A) B > Al > Mg > K

    • (B) Al > Mg > B > K

    • (C) Mg > Al > K > B

    • (D) K > Mg > Al > B

      Correct

    Option (D) is correct.

    Explanation: Metallic character increases down a group and decreases across a period from left to right. K (period 4, group 1) is lower and farther left than Mg, so K > Mg. Mg (group 2) is to the left of Al (group 13) in period 3, so Mg > Al. Al is below B in group 13, so Al > B. Hence K > Mg > Al > B.

    • (A) is wrong: it is the exact reverse of the correct order.
    • (B) is wrong: it puts Al above Mg and K last, though K is the most metallic of the four.
    • (C) is wrong: it puts K below Mg and Al, though K, an alkali metal of period 4, is the most metallic.
  39. 39

    Question 39

    Considering the elements B, C, N, F, and Si, the correct order of their non-metallic character is:

    MCQHard
    1 mark
    Solve with AI
    Answer
    • (A) B > C > Si > N > F

    • (B) Si > C > B > N > F

    • (C) F > N > C > B > Si

      Correct
    • (D) F > N > C > Si > B

    Option (C) is correct.

    Explanation: Non-metallic character increases across a period and decreases down a group; it runs parallel to electronegativity. Across period 2, F > N > C > B. Down group 14, C > Si. B and Si are diagonal neighbours; Si is one period lower and less electronegative, so B > Si. The Pauling electronegativities F 4.0 > N 3.0 > C 2.5 > B 2.0 > Si 1.8 follow exactly this order.

    • (A) is wrong: it nearly reverses the order and puts F, the most non-metallic element, last.
    • (B) is wrong: it puts Si, the least non-metallic, first and F last.
    • (D) is wrong: it places Si above B, though Si is less electronegative (1.8 against 2.0).
  40. 40

    Question 40

    Considering the elements F, Cl, O and N, the correct order of their chemical reactivity in terms of oxidizing property is:

    MCQMedium
    1 mark
    Solve with AI
    Answer
    • (A) F > Cl > O > N

    • (B) F > O > Cl > N

      Correct
    • (C) Cl > F > O > N

    • (D) O > F > N > Cl

    Option (B) is correct.

    Explanation: Oxidizing power is the tendency to take electrons. It increases across a period and decreases down a group, roughly following electronegativity (Pauling: F 4.0, O 3.5, Cl 3.0, N 3.0). Across period 2, F > O > N. Down group 17, F > Cl. Oxygen is more electronegative than chlorine (3.5 against 3.0), so O > Cl. Chlorine and nitrogen are both 3.0, but chlorine needs only one electron to complete its octet and has a large negative electron gain enthalpy (−349 kJ mol⁻¹), so it takes electrons far more readily: Cl > N. Hence F > O > Cl > N.

    • (A) is wrong: it puts Cl above O, though O is more electronegative.
    • (C) is wrong: it puts Cl above F; a more negative electron gain enthalpy does not make Cl a stronger oxidant than F, the most electronegative element.
    • (D) is wrong: it puts O above F and N above Cl, both reversed.
Inside Ch 3

What Class 11 Chemistry Ch 3 covers

The sections of the chapter, in the order the book takes them. Every question above comes from one of these.

  1. 01Earlier Classifications
  2. 02Mendeleev’s Periodic Law And Modern Periodic Law
  3. 03The Modern Periodic Table
  4. 04Ionic Radius And ​Ionisation Enthalpy
  5. 05Electron Gain Enthalpy , Electronegativity
  6. 06Periodic Trends in Chemical Properties
  7. 07Reactivity Of Metals
Common questions

Class 11 Chemistry Ch 3 questions students ask

How many questions are there in Class 11 Chemistry Ch 3?

40 questions. Every one is solved step by step on this page.

Are these Class 11 Chemistry solutions free?

Yes. Every question and its full working is free to read, with no account needed.

Can I download the Class 11 Chemistry Ch 3 solutions as a PDF?

There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.