(a)
S=I−IgIgG=1.0−0.0050.005×20≈0.1005 Ω,RA=G+SGS≈0.10 Ω
(Check: at full scale the ammeter has IgG=0.1 V across it while carrying 1.0 A, so RA=0.10 Ω.)
(b) The ammeter reaches full scale at 1.0 A. For that to happen at 10 V:
Rtotal=1.010=10 Ω⇒Rseries=10−0.10=9.9 Ω
The voltmeter has a resistance of only 10 Ω.

(c) From the bare galvanometer, full scale is at 5.0 mA:
Rtotal=0.00510=2000 Ω⇒Rseries=1980 Ω
This voltmeter has 2000 Ω, 200 times more than the student's. Both read 10 V at full scale, but the student's draws 1.0 A from the circuit it measures, against 5 mA, and would badly disturb it. A voltmeter should have the highest resistance possible. So it must be made from the bare galvanometer, whose full-scale current is small. Adding the shunt first spoils this.