(a) Forward bias: the resistor takes 20−0.7=19.3 V.
If=500019.3=3.86×10−3 A=3.86 mA
Reverse bias: the current is only the reverse current, Ir=1 µA; the diode takes practically all 20 V.
IrIf=1×10−63.86×10−3≈3900
(b) Forward bias:
If=5×10620−0.7=5×10619.3=3.86×10−6 A=3.86 μA
Reverse bias: the diode (2×107 Ω) and the resistor are in series.
Ir=5×106+2×10720=2.5×10720=8.0×10−7 A=0.80 μA
The diode then holds 0.80×10−6×2×107=16 V, and the resistor the other 4 V. A reverse current of 0.8 µA at 16 V is consistent with the diode's reverse current of about 1 µA.
IrIf=0.803.86=4.8
(c) A rectifier works because the diode's resistance is tiny one way and huge the other way, so the circuit passes current much more easily one way. In (a) the 5 kΩ load is thousands of times smaller than the diode's reverse resistance: the diode, not the load, controls the reverse current, and the ratio is about 3900. In (b) the 5 MΩ load is comparable to the diode's reverse resistance (2×107 Ω), so the load now takes a large share of the reverse voltage, the reverse current is not much smaller than the forward current, and the ratio falls to about 4.8: rectification is practically lost. The load must therefore be much smaller than the reverse resistance of the diode.