(a) A half-wave rectifier gives one charging pulse per cycle, so the pulses are T=501=20 ms apart.
C=100 μF:CRL=100×10−6×1000=0.1 s=100 ms=5T
C=1 μF:CRL=1×10−6×1000=1 ms=20T
(b) With 100 µF the capacitor charges to nearly the peak voltage during each pulse and then discharges only slowly, since its time constant is five times the 20 ms gap. The output stays close to the peak, falling a little before the next pulse tops it up: a nearly steady voltage.
With 1 µF the time constant is 20 times shorter than the gap, so the capacitor loses almost all its charge within a few milliseconds of each peak. The output follows the rectified pulses almost exactly and drops to nearly zero between them: very little smoothing.

(c) The condition is CRL≥10T=10×20 ms=0.2 s.
RL=1 kΩ:C≥10000.2=2×10−4 F=200 μF
RL=250 Ω:C≥2500.2=8×10−4 F=800 μF
A smaller load resistance draws more current and drains the capacitor faster, so a proportionally larger capacitor is needed for the same smoothing.