(a) Assume both diodes conduct (to be checked). Let VA be the potential of A in volts and work in mA and kΩ. The current through D₁ and the 1 kΩ resistor, arriving at A, is 112−0.7−VA. It leaves through the 3.3 kΩ resistor, 3.3VA, and through D₂ and the 2 kΩ resistor, 2VA−0.7. By Kirchhoff's junction rule at A:
111.3−VA=3.3VA+2VA−0.7
11.3−VA=0.303VA+0.5VA−0.35⇒11.65=1.803VA
VA=6.46 V
Check: D₁ has its anode at 12 V and cathode side at a lower potential, and VA=6.46 V is well above the 0.7 V that D₂ needs, so both diodes do conduct.
(b)
I1k=111.3−6.46=4.84 mA,I3.3k=3.36.46=1.96 mA,I2k=26.46−0.7=2.88 mA
Check: 1.96+2.88=4.84 mA.

(c) Reversed, D₂ is reverse biased (its cathode is now at A, the higher potential) and carries no current. The 1 kΩ and 3.3 kΩ resistors are then in series with D₁:
I=1+3.312−0.7=4.311.3=2.63 mA,VA=2.63×3.3=8.67 V
VA rises because the 2 kΩ branch no longer draws current from A.
(d) Reversed, D₁ has its cathode towards the positive terminal of the cell, so it is reverse biased. It is the only path from the cell into the network, so no current flows anywhere: all three currents are zero and VA=0. The cell's 12 V appears across D₁.