A full-wave rectifier uses two ideal diodes and a centre-tap transformer whose secondary is rated 15-0-15 V rms. The mains frequency is 50 Hz. The circuit is shown.

What are the peak voltage across the load and the frequency of the output?
Confirming your payment
Competency-Based Questions (CBQ) · Question 32 of 80
A full-wave rectifier uses two ideal diodes and a centre-tap transformer whose secondary is rated 15-0-15 V rms. The mains frequency is 50 Hz. The circuit is shown.

What are the peak voltage across the load and the frequency of the output?
(A) About 42.4 V and 100 Hz
(B) About 21.2 V and 100 Hz
(C) 15 V and 50 Hz
(D) About 21.2 V and 50 Hz
Option (B) is correct.
Explanation: In a centre-tap circuit the load is connected between the centre tap and the joined cathodes of the two diodes. In each half-cycle only one half of the secondary drives current through the load, through the diode joined to that half. Each half gives 15 V rms, so the peak across the load is
The two diodes conduct in turn, one in each half-cycle, and both send current through in the same direction. There are two output pulses in every input cycle, so the output frequency is Hz.
