A half-wave rectifier with an ideal diode is fed from 220 V rms, 50 Hz mains through a step-down transformer with turns ratio 10 : 1. What are the peak voltage across the load and the frequency of the output pulses?
Competency-Based Questions (CBQ) · Question 27 of 80
A half-wave rectifier with an ideal diode is fed from 220 V rms, 50 Hz mains through a step-down transformer with…
Question 271 markMCQEasy
Select your answer
(A) 311 V and 50 Hz
- Correct answer
(B) 31.1 V and 50 Hz
(C) 22 V and 100 Hz
(D) 31.1 V and 100 Hz
Option (B) is correct.
Explanation: The transformer divides the voltage by 10, so the secondary gives
The load sees the peak of this voltage during each positive half-cycle, since an ideal diode drops nothing:
A half-wave rectifier passes one half-cycle in every cycle, so there is one output pulse per input cycle and the output frequency is 50 Hz.

- (A) forgets the step-down transformer and uses the mains peak.
- (C) uses the rms value as the peak and doubles the frequency as a full-wave rectifier would.
- (D) has the right peak but the full-wave frequency.
