Option (A) is correct.
Explanation: Diodes in parallel must have the same voltage across them. As the voltage across the pair rises from zero, the Ge diode reaches its 0.3 V first and starts to conduct. It then holds the pair at about 0.3 V, well below the 0.7 V the Si diode needs, so the Si diode carries practically nothing.
I=1 kΩ5−0.3=4.7 mA(all through the Ge diode)
Check the alternative: if the Si diode conducted, the pair would be at 0.7 V, more than twice the Ge diode's drop, and the Ge diode would take a very large current, pulling the voltage back down. So that cannot be the steady state.

- (B) treats the two diodes as if each had its own 5 V supply and 1 kΩ; together they would then draw 9 mA through one 1 kΩ, which needs 9 V.
- (C) lets the Si diode conduct and blocks the Ge diode, the reverse of what happens.
- (D) shares the current equally, as for two identical resistors in parallel; the diodes are not identical.