Competency-Based Questions (CBQ) · Question 19 of 80
A rectifier for a small appliance is to give a peak output of 12 V from 220 V rms mains.
Question 192 marksMedium
A rectifier for a small appliance is to give a peak output of 12 V from 220 V rms mains. Rectifier circuits are usually fed through a transformer.
(a) Why is a transformer used, rather than joining the diode directly to the mains?
(b) Taking the diode as ideal, find the rms voltage the secondary must give and the turns ratio (primary : secondary) of the transformer.
(a) The diode itself does not change the size of the voltage; the peak of the rectified output equals the peak of the ac applied to it. Mains at 220 V rms has a peak of 2×220≈311 V, far more than the appliance needs. The transformer steps the ac down (or up) to the voltage the load requires before it is rectified. A centre-tap transformer also makes full-wave rectification with two diodes possible.
(b) The secondary must give a peak of 12 V, so
Vrms=212=8.49V
NsNp=VsVp=8.49220≈26
The transformer must step down in the ratio of about 26 : 1.