(a) The diodes are forward biased and need 0.7+0.7=1.4 V to conduct. The input, 10 V, is far above this, so both conduct and hold the output at
vout=1.4 V
I=1 kΩ10−1.4=8.6 mA
(b) 0.9 V is less than 1.4 V, so the diodes do not conduct appreciably and the current is practically zero. With no current there is no drop across the 1 kΩ resistor, so
vout=vin=0.9 V,I≈0
(c) For vin=−5 V the diodes are reverse biased and carry only a negligible reverse current. Again there is no drop across the resistor, so
vout=−5 V
The output follows the input for any voltage below about +1.4 V, but it can never rise above about 1.4 V: any larger positive input is held at 1.4 V, with the excess dropped across the 1 kΩ resistor.