(a) Beyond about 0.7 V the forward current of a silicon diode rises very steeply for a tiny rise in voltage, so its dynamic resistance is only a few ohms or less. The cell tries to hold 3 V across the diode, far above 0.7 V. Nothing in the circuit limits the current except the very small resistance of the diode and the internal resistance of the cell, so a very large current flows. This current heats the junction far beyond its rating and the diode is destroyed (the cell is also quickly drained).
(b) A resistor R must be connected in series with the diode. Once the diode conducts, its voltage stays close to 0.7 V over a wide range of currents, because its V-I curve is almost vertical there. The resistor takes the rest of the cell voltage, so
I=R3−0.7=R2.3 V
The current is therefore decided by the choice of R. A small change in the diode's voltage (a few hundredths of a volt) changes the 2.3 V across R very little, so the diode itself has hardly any effect on the current.
