(a) With the diode removed, each divider works on its own:
VA=15×3+66=10 V,VB=15×2+22=7.5 V
The anode (A) would be 2.5 V above the cathode (B), so the diode is forward biased and must conduct.
(b) An ideal conducting diode has no voltage across it, so A and B are at the same potential V. Treat A and B together as one node. The current flowing in through 3 kΩ and 2 kΩ equals the current flowing out through 6 kΩ and 2 kΩ (resistances in kΩ, currents in mA):
315−V+215−V=6V+2V
Multiplying by 6:
2(15−V)+3(15−V)=V+3V⇒75=9V⇒V=975=8.33 V
The diode current is the current reaching A through 3 kΩ minus the current leaving A through 6 kΩ:
ID=315−8.33−68.33=2.222−1.389=0.833 mA
Check at B: 28.33−215−8.33=4.167−3.333=0.833 mA, the same current arriving through the diode.
(c) Turned round, the diode has its cathode at A and its anode at B. Without current the potentials would be VA=10 V and VB=7.5 V, so the anode is 2.5 V below the cathode: the diode is reverse biased and carries no current. The dividers then work independently:
VA=10 V,VB=7.5 V,reverse voltage=10−7.5=2.5 V
