Confirming your payment

Skip to content

Opening your dashboard

Class 12 Chemistry Chapter 9 Amines: Competency-Based Questions (CBQ)

80 questions on Chapter 9, each worked through on its own page with the AI tutor. Class 12 Chemistry, CBSE 2026-27.

80 questions

1–5 marks · Mixed difficulty

  1. 1

    Question 1

    A student wrote four pairs of isomeric amines of formula C5H13N\text{C}_5\text{H}_{13}\text{N} and labelled the type of isomerism shown by each pair.

    Which pair is labelled correctly?

    MCQMedium
    1 mark
  2. 2

    Question 2

    Aniline, when heated with chloroform and ethanolic potassium hydroxide, gives a foul-smelling product. Four changes to this experiment are proposed:

    P: aniline is replaced by ethanamine

    Q: chloroform is replaced by tetrachloromethane, CCl4\text{CCl}_4

    R: ethanolic KOH is replaced by ethanolic NaOH

    S: aniline is replaced by N-methylaniline

    Which of the changes would still give a foul-smelling product?

    MCQMedium
    1 mark
  3. 3

    Question 3

    Which of the following compounds give N-methylethanamine, CH3CH2NHCH3\text{CH}_3\text{CH}_2\text{NHCH}_3, on reduction with lithium aluminium hydride followed by treatment with water?

    P: CH3CONHCH3\text{CH}_3\text{CONHCH}_3

    Q: HCONHCH2CH3\text{HCONHCH}_2\text{CH}_3

    R: CH3CH2CONH2\text{CH}_3\text{CH}_2\text{CONH}_2

    S: CH3CH2CN\text{CH}_3\text{CH}_2\text{CN}

    MCQMedium
    1 mark
  4. 4

    Question 4

    An alkyl halide is heated with an ethanolic solution of ammonia in a sealed tube at 373 K. The table lists four claims about the amount of ammonia used and the result.

    RowAmount of ammonia usedResult
    LEquimolar amounts of ammonia and alkyl halideTertiary amine is the major product and secondary amine the minor product
    MLarge excess of ammoniaQuaternary ammonium salt is the only product
    NLarge excess of ammoniaPrimary amine is the major product
    OEquimolar amounts of ammonia and alkyl halidePrimary, secondary and tertiary amines in equal amounts, and nothing else

    Which row is correct?

    MCQMedium
    1 mark
  5. 5

    Question 5

    Assertion (A): 4-Methylaniline reacts with excess bromine water at room temperature to give 2,6-dibromo-4-methylaniline, not a tribromo compound.

    Reason (R): The −NH2-\text{NH}_2 group strongly activates the positions ortho and para to itself, and in 4-methylaniline the para position is already occupied by the −CH3-\text{CH}_3 group.

    MCQMedium
    1 mark
  6. 6

    Question 6

    Assertion (A): Benzonitrile (cyanobenzene) cannot be prepared by heating chlorobenzene with potassium cyanide.

    Reason (R): Benzonitrile is obtained when benzenediazonium chloride is treated with copper(I) cyanide.

    MCQMedium
    1 mark
  7. 7

    Question 7

    Assertion (A): When sodium nitrite and dilute hydrochloric acid are added to propan-1-amine at 273–278 K, nitrogen gas is given off at once, whereas aniline under the same conditions gives a clear solution with no immediate evolution of gas.

    Reason (R): Alkyldiazonium salts are highly unstable and lose nitrogen even at 273–278 K, while the arenediazonium ion is stabilised by resonance and survives for a short time in solution at 273–278 K.

    MCQMedium
    1 mark
  8. 8

    Question 8

    The pKb\text{p}K_b of ammonia in water is 4.75.

    In which set does every compound have a pKb\text{p}K_b value higher than that of ammonia?

    MCQMedium
    1 mark
  9. 9

    Question 9

    Butan-1-ol and butan-1-amine have almost the same molar mass (74 and 73 g mol−1^{-1}). Their boiling points are 390.3 K and 350.8 K respectively (NCERT Table 9.2), even though each butan-1-amine molecule has two N–H hydrogens while butan-1-ol has only one O–H hydrogen.

    Which statement best explains why butan-1-ol boils at the higher temperature?

    MCQMedium
    1 mark
  10. 10

    Question 10

    A solution of 4-bromobenzenediazonium chloride is warmed with ethanol.

    Which option gives the organic products correctly?

    MCQMedium
    1 mark
  11. 11

    Question 11

    2-Methylbutanamide, CH3CH2CH(CH3)CONH2\text{CH}_3\text{CH}_2\text{CH(CH}_3)\text{CONH}_2, is warmed with bromine and aqueous sodium hydroxide.

    Which statement about the amine formed is correct?

    MCQMedium
    1 mark
  12. 12

    Question 12

    A student named three amines as follows. Each name breaks an IUPAC rule.

    CompoundStudent's name
    CH2=CH–CH2–NH2\text{CH}_2\text{=CH–CH}_2\text{–NH}_2prop-1-en-3-amine
    C6H5–N(CH3)–CH2CH3\text{C}_6\text{H}_5\text{–N(CH}_3)\text{–CH}_2\text{CH}_3N-methyl-N-ethylaniline
    (CH3)2CH–CH2–NH–CH3(\text{CH}_3)_2\text{CH–CH}_2\text{–NH–CH}_32-methyl-N-methylpropan-1-amine

    For each compound, write the correct IUPAC name, state the rule that was broken, and classify the amine as primary, secondary or tertiary. [1 each]

    Medium
    3 marks
  13. 13

    Question 13

    The boiling points of four compounds are given below.

    CompoundFormulaBoiling point / K
    HexaneCH3(CH2)4CH3\text{CH}_3(\text{CH}_2)_4\text{CH}_3342
    Hexan-1-amineCH3(CH2)5NH2\text{CH}_3(\text{CH}_2)_5\text{NH}_2405
    Hexane-1,6-diamineH2N(CH2)6NH2\text{H}_2\text{N(CH}_2)_6\text{NH}_2478
    N,N-Diethylethanamine(C2H5)3N(\text{C}_2\text{H}_5)_3\text{N}363

    (i) Explain the order of boiling points hexane < hexan-1-amine < hexane-1,6-diamine. [1]

    (ii) Hexan-1-amine and N,N-diethylethanamine are isomers (C6H15N\text{C}_6\text{H}_{15}\text{N}). Explain why the tertiary amine boils about 42 K lower. [1]

    (iii) Hexane-1,6-diamine is very soluble in water, hexan-1-amine is only slightly soluble and hexane is insoluble. Explain this order. [1]

    Medium
    3 marks
  14. 14

    Question 14

    4-Methoxyaniline is diazotised with sodium nitrite and hydrochloric acid at 273–278 K. The cold solution of the diazonium salt is divided into two portions.

    (i) One portion is treated with potassium iodide solution. Write the equation and name the aromatic product. [1]

    (ii) The other portion is treated with fluoroboric acid, HBF4\text{HBF}_4; the precipitate is filtered, dried and heated. Write the equations and name the aromatic product. Why are the products of (i) and (ii) made through the diazonium salt and not by direct halogenation of methoxybenzene? [1]

    Medium
    2 marks
  15. 15

    Question 15

    N-Methylaniline and N,N-dimethylaniline are each treated with benzoyl chloride, C6H5COCl\text{C}_6\text{H}_5\text{COCl}, in the presence of pyridine.

    (i) Write the equation for the reaction of N-methylaniline, give the IUPAC name of the organic product, and state the role of pyridine. [1]

    (ii) N,N-Dimethylaniline does not give a similar product. Explain why. [1]

    Medium
    2 marks
  16. 16

    Question 16

    In a laboratory, aniline is made by warming nitrobenzene with iron scrap and a little hydrochloric acid. At the end, the mixture contains anilinium chloride and some unreacted nitrobenzene.

    (i) Write the equation for the reduction of nitrobenzene, and explain why only a small amount of hydrochloric acid is needed when iron is used. [1]

    (ii) Why is the aniline present in the acidic mixture as anilinium chloride, and how is free aniline obtained from it? Write the equation. [1]

    (iii) A sample of crude aniline still contains some nitrobenzene. Using dilute HCl, ether and NaOH solution, describe how pure aniline can be separated, and explain why the method works. [1]

    Easy
    3 marks
  17. 17

    Question 17

    A chemist needs pure N-ethylaniline, C6H5NHCH2CH3\text{C}_6\text{H}_5\text{NHCH}_2\text{CH}_3, and has aniline as the starting material.

    (i) He first treats aniline with ethanoic anhydride in pyridine and then reduces the product with LiAlH4\text{LiAlH}_4. Write the equations for both steps and name the intermediate. [1]

    (ii) Heating aniline directly with bromoethane would be shorter. Explain why it would not give pure N-ethylaniline. [1]

    (iii) How would the Hinsberg test confirm that the final product is a secondary amine? [1]

    Medium
    3 marks
  18. 18

    Question 18

    Give one chemical test, with the reagent and the observation for each compound, to distinguish between the compounds in each pair. Write the equation for the compound that reacts.

    (i) Cyclohexanamine and aniline [1]

    (ii) N-Methylaniline and 4-methylaniline [1]

    (iii) N-Methylpropan-2-amine and N,N-dimethylethanamine [1]

    Medium
    3 marks
  19. 19

    Question 19

    Three test tubes M, N and O each contain a different amine of molecular formula C3H9N\text{C}_3\text{H}_9\text{N}. A student tests them as shown in the flowchart.

    Class 12 Chemistry Amines

    (i) Identify the class of amine (primary, secondary or tertiary) in M, N and O. Justify each step. [2]

    (ii) Write a structure and the IUPAC name of a C3H9N\text{C}_3\text{H}_9\text{N} amine that fits each test tube. [1]

    Medium
    3 marks
  20. 20

    Question 20

    Compounds P and Q are shown below.

    Class 12 Chemistry Amines

    (i) Which compound has the more acidic N–H hydrogen? Justify your answer. [1]

    (ii) Predict what is observed when each compound is shaken with dilute aqueous NaOH, and write the equation for the compound that reacts. [1]

    Medium
    2 marks
  21. 21

    Question 21

    Each option gives an amine, its class and a name.

    In which option are both the class and the IUPAC name correct?

    MCQEasy
    1 mark
  22. 22

    Question 22

    Three of the four amines of formula C3H9N\text{C}_3\text{H}_9\text{N} (molar mass 59 g mol−1^{-1}) are considered here. Two of them are primary amines: propan-1-amine, CH3CH2CH2NH2\text{CH}_3\text{CH}_2\text{CH}_2\text{NH}_2 (b.p. 321 K), and propan-2-amine, (CH3)2CHNH2(\text{CH}_3)_2\text{CHNH}_2 (b.p. 305 K). The third, N,N-dimethylmethanamine, (CH3)3N(\text{CH}_3)_3\text{N}, is a tertiary amine, yet it is very soluble in water.

    (i) Both primary amines have two N–H hydrogens and the same molar mass. Explain why propan-2-amine nevertheless boils about 16 K lower than propan-1-amine. [1]

    (ii) Explain why N,N-dimethylmethanamine is very soluble in water although its molecules cannot hydrogen bond with one another. [1]

    Medium
    2 marks
  23. 23

    Question 23

    A cold solution of benzenediazonium chloride is added to N,N-dimethylaniline, and a coloured azo compound separates.

    Which option describes the product correctly?

    MCQMedium
    1 mark
  24. 24

    Question 24

    Read the passage and answer the questions that follow.

    Azo dyes contain the −N=N−-\text{N=N}- group joining two aromatic rings. A dye works makes them in two steps. First, a primary aromatic amine is diazotised with sodium nitrite and hydrochloric acid in an ice bath at 273–278 K. The cold diazonium salt solution is then run into a second aromatic compound. With phenol in NaOH solution, benzenediazonium chloride gives an orange dye; with aniline it gives a yellow dye. The works manager insists that the diazonium solution is never stored and is never allowed to warm up, and that nitrobenzene, though cheap, is useless as the second compound.

    (i) One day the ice bath fails and the benzenediazonium chloride solution warms to 283 K before it is used. The main organic product formed from the diazonium salt is: (A) chlorobenzene    (B) phenol    (C) benzene    (D) aniline [1]

    (ii) Write the balanced equation for the formation of the orange dye from benzenediazonium chloride, phenol and NaOH, and name the dye. [1]

    (iii) The yellow dye formed with aniline is: (A) 2-aminoazobenzene    (B) 3-aminoazobenzene    (C) 4-aminoazobenzene    (D) N-phenylbenzenamine [1]

    (iv) Explain why nitrobenzene cannot be used as the second compound. [1]

    Medium
    4 marks
  25. 25

    Question 25

    Which of the following does not give butan-1-amine, CH3CH2CH2CH2NH2\text{CH}_3\text{CH}_2\text{CH}_2\text{CH}_2\text{NH}_2?

    MCQMedium
    1 mark
  26. 26

    Question 26

    4-Methylaniline is diazotised at 273–278 K and the cold solution is divided into three portions. Write the equation, name the main organic product, and name the reaction where it has a name, when a portion is:

    (i) warmed with copper(I) cyanide [1]

    (ii) warmed with copper powder and hydrobromic acid [1]

    (iii) treated with hypophosphorous acid, H3PO2\text{H}_3\text{PO}_2, and water [1]

    Medium
    3 marks
  27. 27

    Question 27

    An organic compound X gives a positive carbylamine test. X dissolves in dilute hydrochloric acid, and with bromine water it immediately gives a white precipitate.

    Which compound is X most likely to be?

    MCQMedium
    1 mark
  28. 28

    Question 28

    A teacher gives a class two amines, methanamine (CH3NH2\text{CH}_3\text{NH}_2) and aniline (C6H5NH2\text{C}_6\text{H}_5\text{NH}_2), and asks them to compare their reactions.

    (i) Both dissolve in dilute hydrochloric acid. Write both equations and name the salts formed. [1]

    (ii) Methanamine reacts with ethanoic anhydride. Write the equation and give the IUPAC name of the organic product. [1]

    (iii) Aniline gives a white precipitate at once with bromine water, but methanamine does not. Explain, with an equation. [1]

    (iv) Each amine is treated with NaNO2\text{NaNO}_2 and dilute HCl at 273–278 K. Write the equation for each and state the observable difference. [1]

    (v) The solution obtained from aniline in (iv) is warmed with potassium iodide. Write the equation, and state why this product is made this way rather than from benzene and iodine. [1]

    Medium
    5 marks
  29. 29

    Question 29

    A trainee chemist receives four samples W, X, Y and Z. She is told they are propan-1-amine, N-methylpropan-1-amine, N,N-dimethylmethanamine and aniline, but not in that order. Her results:

    • Test 1: all four samples dissolve in dilute HCl, and each is recovered on adding excess NaOH solution.
    • Test 2 (carbylamine test): W and Z give a foul smell; X and Y do not.
    • Test 3 (Hinsberg test): W gives a product soluble in aqueous NaOH; X gives a product insoluble in aqueous NaOH; Y does not react.
    • Test 4: Z gives a white precipitate at once with bromine water; W, X and Y do not.

    (i) What does Test 1 show about all four compounds? Write a general equation. [1]

    (ii) Identify Z, using Tests 2 and 4. [1]

    (iii) Identify W, X and Y, using Tests 2 and 3. [1]

    (iv) W can also be made by Hoffmann bromamide degradation. Name the amide needed and write the equation. [1]

    Medium
    4 marks
  30. 30

    Question 30

    Propan-1-amine and N-methylethanamine are isomers of formula C3H9N\text{C}_3\text{H}_9\text{N}.

    Which of the following tests cannot be used to tell them apart?

    MCQEasy
    1 mark
  31. 31

    Question 31

    The pKb\text{p}K_b values of ethanamine and aniline in water are 3.29 and 9.38; that of ammonia is 4.75 (NCERT Table 9.3).

    (i) Calculate KbK_b for ethanamine and for aniline, and the ratio Kb(ethanamine)/Kb(aniline)K_b(\text{ethanamine})/K_b(\text{aniline}). [1]

    (ii) Explain, in terms of the lone pair on nitrogen, why ethanamine is a stronger base and aniline a weaker base than ammonia. [1]

    (iii) A solution contains 1 mol of ethanamine and 1 mol of aniline. Exactly 1 mol of HCl is added. Which amine is converted mainly into its salt? Write the equation. [1]

    Easy
    3 marks
  32. 32

    Question 32

    A dye chemist wants to make the azo dye shown below.

    Class 12 Chemistry Amines

    Which pair of reactants, coupled in cold aqueous NaOH, gives this dye?

    MCQEasy
    1 mark
  33. 33

    Question 33

    Assertion (A): Hoffmann bromamide degradation of 4-methylbenzamide, CH3C6H4CONH2\text{CH}_3\text{C}_6\text{H}_4\text{CONH}_2, gives 4-methylaniline, an arylamine, even though the nitrogen of the amide is not attached to the ring.

    Reason (R): In Hoffmann bromamide degradation, the group attached to the carbonyl carbon migrates to the nitrogen atom, and the carbonyl carbon is lost.

    MCQEasy
    1 mark
  34. 34

    Question 34

    Assertion (A): Butan-2-amine, CH3CH2CH(NH2)CH3\text{CH}_3\text{CH}_2\text{CH(NH}_2)\text{CH}_3, and 2-methylpropan-2-amine, (CH3)3C–NH2(\text{CH}_3)_3\text{C–NH}_2, are both primary amines.

    Reason (R): In butan-2-amine the −NH2-\text{NH}_2 group is on a secondary carbon atom, and in 2-methylpropan-2-amine it is on a tertiary carbon atom.

    MCQEasy
    1 mark
  35. 35

    Question 35

    A technician wants to use the Gabriel phthalimide synthesis to prepare a pure primary amine. He heats potassium phthalimide with four different halides:

    P: bromoethane

    Q: chlorobenzene

    R: benzyl chloride (C6H5CH2Cl\text{C}_6\text{H}_5\text{CH}_2\text{Cl})

    S: iodobenzene

    With which halides will the synthesis give a primary amine after alkaline hydrolysis?

    MCQMedium
    1 mark
  36. 36

    Question 36

    Gabriel phthalimide synthesis is described as a method for preparing "primary amines free from other amines". Its first step converts phthalimide into potassium phthalimide with ethanolic KOH.

    (i) Explain why N-methylethanamine cannot be prepared by this method, whatever alkyl halide is used. [1]

    (ii) Ethanamine, CH3CH2NH2\text{CH}_3\text{CH}_2\text{NH}_2, also has N–H bonds but is not converted into a potassium salt by KOH. Explain why the N–H hydrogen of phthalimide is acidic enough to be removed by KOH, and write the equation for the first step. [1]

    Medium
    2 marks
  37. 37

    Question 37

    0.010 M aqueous solutions of three bases are prepared at 298 K. Their measured pH values are 11.3, 10.6 and 8.5. The bases are methanamine, phenylmethanamine and N,N-dimethylaniline.

    Which matching is correct?

    MCQEasy
    1 mark
  38. 38

    Question 38

    What is the IUPAC name of the compound shown?

    Class 12 Chemistry Amines

    MCQEasy
    1 mark
  39. 39

    Question 39

    Aniline and acetanilide (C6H5NHCOCH3\text{C}_6\text{H}_5\text{NHCOCH}_3) are compared in three reactions. For each, state what is observed for both compounds and give the reason.

    (i) Shaking with dilute hydrochloric acid. [1]

    (ii) Reaction with bromine: aniline with bromine water, and acetanilide with bromine in ethanoic acid. Name the main product in each case. [1]

    (iii) Heating with chloroform and ethanolic KOH. [1]

    Medium
    3 marks
  40. 40

    Question 40

    A student heats 1-bromobutane with ethanolic ammonia in a sealed tube at 373 K, hoping to make butan-1-amine, but obtains a mixture of four nitrogen-containing products.

    (i) Write equations for the successive reactions that give these four products, and give the IUPAC name of each product. [1]

    (ii) Explain why the reaction does not stop at butan-1-amine. [1]

    (iii) Suggest a method that converts 1-bromobutane into butan-1-amine alone, with equations. [1]

    Medium
    3 marks
  41. 41

    Question 41

    A chemist has to prepare 3-bromotoluene (1-bromo-3-methylbenzene) from toluene. Direct bromination is useless because the methyl group directs bromine to the ortho and para positions. Four students propose the following sequences. Which sequence gives 3-bromotoluene as the major final product?

    (Where a nitration step gives an ortho/para mixture, assume the para isomer is separated and carried forward.)

    MCQMedium
    1 mark
  42. 42

    Question 42

    A primary aliphatic amine X weighing 0.354 g is treated with excess sodium nitrite and dilute hydrochloric acid. Nitrogen is evolved quantitatively and 134.4 mL of N2\text{N}_2 is collected at STP. The organic product, an alcohol, gives a yellow precipitate when warmed with iodine and sodium hydroxide. X is

    (Molar volume at STP = 22.4 L mol−1^{-1}; C = 12, H = 1, N = 14)

    MCQHard
    1 mark
  43. 43

    Question 43

    1-Bromopropane is converted into three amines X, Y and Z by the routes below.

    • Route 1: alcoholic KCN, then LiAlH4\text{LiAlH}_4 gives X.
    • Route 2: potassium phthalimide on heating, then alkaline hydrolysis gives Y.
    • Route 3: aqueous KOH, then acidified KMnO4\text{KMnO}_4, then NH3\text{NH}_3 with strong heating, then Br2\text{Br}_2 in aqueous NaOH gives Z.

    Which statement is correct?

    MCQHard
    1 mark
  44. 44

    Question 44

    Assertion (A): 1-Chloro-3-iodobenzene can be prepared from benzene by the sequence: conc. HNO3\text{HNO}_3/conc. H2SO4\text{H}_2\text{SO}_4; then Cl2\text{Cl}_2/anhydrous FeCl3\text{FeCl}_3; then Sn/HCl; then NaNO2\text{NaNO}_2/HCl at 273–278 K; then KI.

    Reason (R): Chlorination is carried out at the nitrobenzene stage because the chlorine atom already on the ring is a meta-directing group.

    MCQHard
    1 mark
  45. 45

    Question 45

    An organic compound X has the molecular formula C8H11N\text{C}_8\text{H}_{11}\text{N}. It shows the following behaviour.

    • It dissolves in dilute hydrochloric acid.
    • It gives no foul smell when heated with chloroform and ethanolic KOH.
    • With benzenesulphonyl chloride it gives a product that is insoluble in aqueous NaOH.
    • With bromine water it gives an immediate white precipitate at room temperature.

    X is

    MCQHard
    1 mark
  46. 46

    Question 46

    Read the passage and answer the questions that follow.

    Two flasks are cooled in ice to 273 K. Flask 1 contains 1.86 g of aniline dissolved in dilute hydrochloric acid, and flask 2 contains 0.900 g of ethanamine dissolved in dilute hydrochloric acid. A slight excess of cold aqueous sodium nitrite is added to each flask.

    Flask 1 gives a clear solution and hardly any gas. Flask 2 fizzes steadily even at 273 K, and 448 mL of nitrogen (measured at STP) is collected from it.

    Flask 1 is then warmed to 323 K. Gas is evolved until 403 mL of nitrogen (at STP) has been collected, and an oily liquid Q separates. Q gives a violet colour with neutral iron(III) chloride.

    (Molar volume at STP = 22.4 L mol−1^{-1}; C = 12, H = 1, N = 14, O = 16)

    (i) A student argues that each diazonium group, –N2+–\text{N}_2^+, carries two nitrogen atoms, so the nitrogen collected must come from the amine alone. At most, how much N2\text{N}_2 can one mole of amine release in either flask? (A) 2 mol, because the amine supplies one N2\text{N}_2 and nitrous acid supplies a second    (B) 1 mol, because each N2\text{N}_2 molecule takes one N atom from the amino group and one from nitrous acid, and the amine is the limiting reagent    (C) 0.5 mol, because both N atoms of each N2\text{N}_2 come from amine molecules    (D) It is fixed by the amount of sodium nitrite, because all of the nitrogen gas comes from nitrous acid [1]

    (ii) Write the balanced equation for the reaction in flask 2 and show from the data that it is quantitative. [1]

    (iii) Identify Q and write the balanced equation for the reaction that occurs when flask 1 is warmed. [1]

    (iv) Calculate the percentage of the aniline that had been converted into the diazonium salt (and then decomposed on warming), and the mass of Q formed. [1]

    Hard
    4 marks
  47. 47

    Question 47

    Benzylamine (C6H5CH2NH2\text{C}_6\text{H}_5\text{CH}_2\text{NH}_2) and aniline (C6H5NH2\text{C}_6\text{H}_5\text{NH}_2) are both primary amines, but benzylamine has one carbon more. Using reactions from this unit together with the oxidation of alcohols to acids and the conversion of acids into amides, convert benzylamine into aniline. Write the reagent for each step, and name the step in which the number of carbon atoms decreases.

    Hard
    2 marks
  48. 48

    Question 48

    A compound A has the molecular formula C4H7N\text{C}_4\text{H}_7\text{N} and contains a –C≡N–\text{C}{\equiv}\text{N} group.

    • Reduction of A with LiAlH4\text{LiAlH}_4 gives a primary amine B, C4H11N\text{C}_4\text{H}_{11}\text{N}.
    • Partial hydrolysis of A gives an amide C, C4H9NO\text{C}_4\text{H}_9\text{NO}.
    • C, on warming with bromine and aqueous sodium hydroxide, gives an amine D, C3H9N\text{C}_3\text{H}_9\text{N}.
    • D reacts with nitrous acid to give nitrogen and an alcohol that gives a yellow precipitate with iodine and sodium hydroxide.

    (a) Identify A, B, C and D, giving their IUPAC names. [2]

    (b) Write the balanced equation for the conversion of C into D, and state why D has one carbon fewer than C while B has the same number of carbons as A. [1]

    Hard
    3 marks
  49. 49

    Question 49

    4-Bromoaniline is made from 9.30 g of aniline in three steps:

    • Step 1: acetylation with acetic anhydride (yield 90.0 %),
    • Step 2: bromination of the product with bromine in ethanoic acid (yield 80.0 %),
    • Step 3: hydrolysis of the brominated amide (yield 85.0 %).

    (a) Why is aniline not simply shaken with bromine water to make 4-bromoaniline in one step? [1]

    (b) Calculate the mass of 4-bromoaniline obtained. (C = 12, H = 1, N = 14, Br = 80) [1]

    Hard
    2 marks
  50. 50

    Question 50

    A student has to make the orange dye p-hydroxyazobenzene. The only organic compound available is benzene. The inorganic reagents available are conc. HNO3\text{HNO}_3, conc. H2SO4\text{H}_2\text{SO}_4, tin, hydrochloric acid, sodium nitrite, sodium hydroxide and ice.

    (a) Outline the route, with the reagents and conditions for each step, and write the equation for the final step. [2]

    (b) What is the minimum mass of benzene needed to make 0.0100 mol of the dye? (C = 12, H = 1) [1]

    Hard
    3 marks
  51. 51

    Question 51

    1,4-Dinitrobenzene is needed for a research project.

    (a) Explain why it cannot be made by nitrating nitrobenzene. [1]

    (b) 4-Nitroaniline is diazotised at 273–278 K and the solution is treated with fluoroboric acid, which precipitates a salt X. X is then heated with aqueous sodium nitrite in the presence of copper. Identify X and write balanced equations for all three steps. [2]

    (c) A second sample of dry X is heated on its own. Write the balanced equation and name the organic product. [1]

    (d) Starting from 2.76 g of 4-nitroaniline, X is obtained in 80.0 % yield and its conversion into 1,4-dinitrobenzene has a yield of 75.0 %. Calculate the mass of 1,4-dinitrobenzene obtained and the volume of nitrogen (at STP) released in the last step. (C = 12, H = 1, N = 14, O = 16; molar volume at STP = 22.4 L mol−1^{-1}) [1]

    Hard
    5 marks
  52. 52

    Question 52

    Four bottles P, Q, R and S each contain a different isomer of formula C7H9N\text{C}_7\text{H}_9\text{N}. All four dissolve in dilute hydrochloric acid. The following observations are made.

    • P gives a foul smell when heated with chloroform and ethanolic KOH. With sodium nitrite and HCl at 273 K it immediately evolves nitrogen and gives a neutral compound C7H8O\text{C}_7\text{H}_8\text{O}.
    • Q gives no foul smell with chloroform and ethanolic KOH. With benzenesulphonyl chloride it gives a solid that does not dissolve in aqueous NaOH.
    • R and S both give a foul smell with chloroform and ethanolic KOH. With sodium nitrite and HCl at 273 K both give clear solutions (no gas), which give orange dyes with alkaline phenol.
    • With excess bromine water, R gives a white precipitate C7H6Br3N\text{C}_7\text{H}_6\text{Br}_3\text{N}, while S gives C7H7Br2N\text{C}_7\text{H}_7\text{Br}_2\text{N}.
    • The diazonium salt from S, with CuCl/HCl, gives a chlorotoluene which, on vigorous oxidation with KMnO4\text{KMnO}_4 followed by acidification, gives 4-chlorobenzoic acid.

    (a) Identify P, Q, R and S, with IUPAC names, explaining the clue that decides each one. [3]

    (b) Write the balanced equation for the reaction of P with sodium nitrite and hydrochloric acid. [1]

    (c) Calculate the mass of white precipitate obtained when 1.07 g of R reacts completely with bromine water. (C = 12, H = 1, N = 14, Br = 80) [1]

    Hard
    5 marks
  53. 53

    Question 53

    A student has exactly 1.86 g of aniline and no other amine. She wants to make as much p-aminoazobenzene (yellow dye) as possible from it, and she obtains 1.38 g of the dye.

    (a) Explain, with equations, why at most 0.0100 mol of dye can be made from this aniline. [1]

    (b) Calculate her percentage yield. (C = 12, H = 1, N = 14) [1]

    Medium
    2 marks
  54. 54

    Question 54

    Three amines U, V and W are isomers of formula C4H11N\text{C}_4\text{H}_{11}\text{N}.

    • U gives a foul smell when heated with chloroform and ethanolic KOH. With nitrous acid it evolves nitrogen and gives an alcohol C4H10O\text{C}_4\text{H}_{10}\text{O} that is not oxidised by acidified potassium dichromate.
    • V gives no foul smell, but it reacts with ethanoyl chloride in the presence of pyridine to give an amide. The two groups attached to the nitrogen of V are identical.
    • W gives no foul smell and does not react with ethanoyl chloride, but it dissolves in dilute HCl.

    (a) Identify U, V and W, giving IUPAC names and the reasoning. [2]

    (b) Write the balanced equations for the carbylamine reaction of U and the reaction of V with ethanoyl chloride. [1]

    (c) Can U be prepared by reducing a nitrile with LiAlH4\text{LiAlH}_4? Name an amide from which U can be made instead, and write the equation. [1]

    (d) Calculate the mass of amide formed when 0.730 g of V reacts completely with ethanoyl chloride. (C = 12, H = 1, N = 14, O = 16) [1]

    Medium
    5 marks
  55. 55

    Question 55

    5.84 g of propanamide is converted into ethanamine by Hoffmann bromamide degradation. 2.70 g of ethanamine is isolated.

    (a) Write the balanced equation and calculate the minimum masses of bromine and sodium hydroxide required. [1]

    (b) Calculate the percentage yield of ethanamine, and state what happens to the third carbon atom of propanamide. [1]

    (C = 12, H = 1, N = 14, O = 16, Na = 23, Br = 80)

    Medium
    2 marks
  56. 56

    Question 56

    An aromatic primary amine A has the molecular formula C6H6ClN\text{C}_6\text{H}_6\text{ClN}. A is diazotised at 273–278 K.

    • One portion of the diazonium solution is treated with hypophosphorous acid (H3PO2\text{H}_3\text{PO}_2) and gives chlorobenzene.
    • Another portion is treated with CuCl in HCl and gives B, C6H4Cl2\text{C}_6\text{H}_4\text{Cl}_2, whose dipole moment is zero.

    (a) Identify A and B, explaining how each clue is used. [1]

    (b) Write balanced equations for the conversion of A into B. [1]

    (c) A student suggests making A by heating 1,4-dichlorobenzene with ammonia. Why does this fail, and how is A actually made from chlorobenzene? [1]

    Hard
    3 marks
  57. 57

    Question 57

    An amine X, C3H9N\text{C}_3\text{H}_9\text{N}, dissolves in dilute HCl, gives no foul smell with chloroform and ethanolic KOH, and reacts with benzoyl chloride to form an amide. X was prepared by reducing an amide of formula C3H7NO\text{C}_3\text{H}_7\text{NO} with LiAlH4\text{LiAlH}_4.

    Identify X, and show that two different amides of formula C3H7NO\text{C}_3\text{H}_7\text{NO} could have been used to make it. Explain why the other two amides of this formula are ruled out.

    Medium
    2 marks
  58. 58

    Question 58

    Aradhya diazotises two equal batches of aniline, each of 4.65 g, at 273–278 K and converts each diazonium solution into chlorobenzene by a different method.

    • Method I: the diazonium solution is warmed with copper powder and hydrochloric acid. 3.94 g of chlorobenzene is obtained.
    • Method II: the diazonium solution is treated with copper(I) chloride dissolved in hydrochloric acid. 4.73 g of chlorobenzene is obtained.

    (a) Name the two reactions and write the equation for Method II. [1]

    (b) Calculate the percentage yield of each method and state which method the result supports as the better one. (C = 12, H = 1, N = 14, Cl = 35.5) [1]

    Hard
    2 marks
  59. 59

    Question 59

    0.295 g of a saturated aliphatic amine Y is exactly neutralised by 5.00 mL of 1.00 M hydrochloric acid. Y does not react with benzenesulphonyl chloride.

    (a) Find the molar mass and the molecular formula of Y, and identify it. [1]

    (b) Of all the isomers of Y, Y has the lowest boiling point. Explain why. [1]

    Medium
    2 marks
  60. 60

    Question 60

    Read the passage and answer the questions that follow.

    2,4,6-Tribromobenzoic acid has three bromine atoms at the positions ortho and para to the carboxyl carbon. A chemist makes it from aniline in four steps:

    • aniline is shaken with bromine water to give a white precipitate P;
    • P is diazotised with NaNO2\text{NaNO}_2 and HCl at 273–278 K to give Q;
    • Q is treated with CuCN/KCN to give R;
    • R is heated with dilute acid to give 2,4,6-tribromobenzoic acid.

    (i) Why is bromination carried out while the nitrogen group is still –NH2–\text{NH}_2? (A) Only –NH2–\text{NH}_2 makes the ring reactive enough to be brominated by bromine water, and it sends Br to the positions ortho and para to itself    (B) The diazonium group is ortho/para directing and would add bromine to the ring    (C) Bromine water oxidises the diazonium group    (D) –NH2–\text{NH}_2 is meta directing in bromine water [1]

    (ii) Write balanced equations for the conversions of Q into R and R into the acid, and name R. [1]

    (iii) A student suggests a shorter route: brominate benzoic acid directly with Br2\text{Br}_2/FeBr3\text{FeBr}_3. What would the main product be, and why? [1]

    (iv) Starting from 1.86 g of aniline, the overall yield of the four steps is 60.0 %. Calculate the mass of 2,4,6-tribromobenzoic acid obtained. (C = 12, H = 1, N = 14, O = 16, Br = 80) [1]

    Hard
    4 marks
  61. 61

    Question 61

    A chemist has a liquid mixture of three amines: butan-1-amine, N-ethylethanamine and N,N-diethylethanamine. She shakes the mixture with benzenesulphonyl chloride in the presence of excess aqueous KOH.

    (a) Write the equations for the reactions of benzenesulphonyl chloride with the amines that react. Explain why the product from butan-1-amine dissolves in the aqueous KOH while the product from N-ethylethanamine does not. [1]

    (b) Using these differences, outline how the three amines can be separated from one another. Say what is removed at each stage and in which form. [1]

    (c) N,N-Diethylethanamine is the strongest base of the three in water, yet it does not react with benzenesulphonyl chloride at all. Explain this apparent contradiction. [1]

    Hard
    3 marks
  62. 62

    Question 62

    Five para-substituted anilines are compared:

    P: aniline

    Q: p-methoxyaniline

    R: p-nitroaniline

    S: p-methylaniline

    T: p-chloroaniline

    Which is the correct order of decreasing basic strength in water?

    MCQMedium
    1 mark
  63. 63

    Question 63

    Four diazonium salts are prepared at 273–278 K: benzenediazonium chloride, 4-nitrobenzenediazonium chloride, 4-methylbenzenediazonium chloride and 4-methoxybenzenediazonium chloride. Equal amounts of each are added to the same cold, mildly alkaline solution of phenol. The 4-nitro salt gives its azo dye almost at once, while the 4-methoxy salt couples very slowly.

    (a) Draw the resonance structures of the benzenediazonium ion. Use them to explain why a –NO2_2 group para to –N2+\text{–N}_2^+ makes the ion couple much faster, while a –OCH3_3 group in the same position makes it couple more slowly. [1]

    (b) Arrange the four diazonium ions in order of decreasing rate of coupling with phenol, giving a reason for the position of the 4-methyl ion. Write the balanced equation for the coupling of the fastest one with phenol in alkaline solution and name the product. [1]

    (c) Predict which is more stable in solution: the benzenediazonium ion or the 4-methoxybenzenediazonium ion. Justify your answer from the resonance structures you drew in (a). [1]

    Hard
    3 marks
  64. 64

    Question 64

    NCERT Table 9.3 gives the following pKb\text{p}K_b values in water:

    AminepKb\text{p}K_b
    Ammonia4.75
    Phenylmethanamine (benzylamine), C6H5CH2NH2\text{C}_6\text{H}_5\text{CH}_2\text{NH}_24.70
    Benzenamine (aniline), C6H5NH2\text{C}_6\text{H}_5\text{NH}_29.38
    N-Methylaniline, C6H5NHCH3\text{C}_6\text{H}_5\text{NHCH}_39.30
    N,N-Dimethylaniline, C6H5N(CH3)2\text{C}_6\text{H}_5\text{N}(\text{CH}_3)_28.92

    (a) Benzylamine and aniline both contain a benzene ring and an –NH2_2 group, yet benzylamine is about 5×1045 \times 10^4 times the stronger base. Explain, and explain also why benzylamine is only about as basic as ammonia rather than as basic as methanamine (pKb\text{p}K_b 3.38). [1]

    (b) Methyl groups on nitrogen raise the basic strength of aniline only slightly (9.38 → 9.30 → 8.92). Explain why the change is small compared with the huge gap between aniline and the alkylamines. [1]

    Medium
    2 marks
  65. 65

    Question 65

    A dye chemist needs pure p-nitroaniline. Direct nitration of aniline gives tarry oxidation products and a large amount of m-nitroaniline, so she first converts aniline to acetanilide with acetic anhydride in pyridine, nitrates the acetanilide, and then hydrolyses the product.

    (a) Using resonance, explain why the –NHCOCH3\text{–NHCOCH}_3 group activates the ring less than –NH2\text{–NH}_2, and why nitration of acetanilide gives very little meta product. Write the equation for the acetylation step. [1]

    (b) Explain why the nitro group enters mainly para rather than ortho to –NHCOCH3\text{–NHCOCH}_3. Write the equations for the nitration and hydrolysis steps. [1]

    Medium
    2 marks
  66. 66

    Question 66

    Four amines are treated separately with NaNO2\text{NaNO}_2 and dilute HCl at 273–278 K. Each cold solution is then added to an alkaline solution of phenol. Which amine gives an orange-red azo dye?

    MCQMedium
    1 mark
  67. 67

    Question 67

    When aniline is heated with concentrated sulphuric acid at 453–473 K, the main product is sulphanilic acid (4-aminobenzenesulphonic acid). Unlike most organic compounds of similar size, sulphanilic acid is a high-melting solid (it decomposes at about 560 K without melting cleanly), is almost insoluble in ether, and is only sparingly soluble in water.

    (a) Write the equations for the formation of sulphanilic acid from aniline, naming the salt that forms first. [1]

    (b) Sulphanilic acid contains a strongly acidic group and a basic group in the same molecule. Show the structure it actually has in the solid and use it to explain its high melting point and insolubility in ether. [1]

    (c) Sulphanilic acid dissolves readily in dilute aqueous NaOH but not in dilute HCl. Explain both observations with equations or structures. [1]

    Medium
    3 marks
  68. 68

    Question 68

    Approximate pKb\text{p}K_b values in water are: aniline 9.38, m-nitroaniline 11.5, p-nitroaniline 13.0, o-nitroaniline 14.3.

    (a) m-Nitroaniline and p-nitroaniline carry the same substituent, yet p-nitroaniline is the weaker base. Draw a resonance structure of p-nitroaniline that explains this, and explain why no such structure can be drawn for m-nitroaniline. [1]

    (b) o-Nitroaniline is the weakest base of the three isomers. Give two reasons. [1]

    (c) Calculate how many times larger KbK_b is for m-nitroaniline than for p-nitroaniline. [1]

    Hard
    3 marks
  69. 69

    Question 69

    Benzenediazonium chloride couples with phenol to give orange p-hydroxyazobenzene. The coupling is carried out in a mildly alkaline solution (about pH 9–10) at 273 K, whereas the same diazonium solution shows no reaction at all with benzene or with nitrobenzene.

    (a) Explain why a mildly alkaline medium makes coupling with phenol much faster. Write the balanced equation for the coupling. [1]

    (b) Explain why benzene and nitrobenzene do not couple, and state what this tells you about the benzenediazonium ion as an electrophile. [1]

    Hard
    2 marks
  70. 70

    Question 70

    A student writes four statements about benzenediazonium chloride:

    Statement 1: It is a colourless crystalline solid that is readily soluble in water.

    Statement 2: If its aqueous solution is allowed to warm to 283 K, chlorobenzene is formed with evolution of nitrogen.

    Statement 3: In the Gattermann reaction, the diazonium salt solution is treated with hydrochloric acid in the presence of copper powder; the yield is lower than in the Sandmeyer reaction.

    Statement 4: In the coupling reaction with phenol, the diazonium ion acts as a nucleophile and attacks the ring.

    Which of the statements are correct?

    MCQMedium
    1 mark
  71. 71

    Question 71

    Aniline (pKb\text{p}K_b 9.38) and cyclohexanamine (pKb\text{p}K_b 3.36) both have an –NH2_2 group on a six-membered carbon ring.

    (a) Draw the resonance structures of aniline and of the anilinium ion. Use the number of structures to explain why aniline is much less basic than cyclohexanamine. [1]

    (b) Calculate how many times larger KbK_b is for cyclohexanamine than for aniline. [1]

    (c) Use the same resonance structures to explain why aniline reacts with bromine water at room temperature, without a catalyst, to give 2,4,6-tribromoaniline. Write the balanced equation. [1]

    Medium
    3 marks
  72. 72

    Question 72

    N,N-Dimethylaniline, C6H5N(CH3)2\text{C}_6\text{H}_5\text{N}(\text{CH}_3)_2, and the N,N,N-trimethylanilinium ion, C6H5N+(CH3)3\text{C}_6\text{H}_5\text{N}^+(\text{CH}_3)_3, both have a nitrogen atom bonded directly to the benzene ring.

    (a) One group is strongly activating and ortho/para-directing; the other is strongly deactivating and meta-directing. Identify which is which and explain the difference in terms of the nitrogen atom's electrons. [1]

    (b) Predict the major product when the N,N,N-trimethylanilinium ion is nitrated with a mixture of concentrated HNO3\text{HNO}_3 and H2SO4\text{H}_2\text{SO}_4, and write the equation. Explain why raising the acidity of the medium cannot change the outcome for this ion, whereas it does change the outcome for aniline. [1]

    Hard
    2 marks
  73. 73

    Question 73

    Assertion (A): m-Methoxyaniline (pKb\text{p}K_b 9.77) is a weaker base than aniline (pKb\text{p}K_b 9.38).

    Reason (R): The –OCH3\text{–OCH}_3 group is electron-releasing, so it increases the basic strength of aniline whatever its position on the ring.

    MCQMedium
    1 mark
  74. 74

    Question 74

    Benzenediazonium chloride is added to a cold, mildly alkaline solution of 4-methylphenol (p-cresol). An orange azo dye forms. Which is the dye?

    MCQHard
    1 mark
  75. 75

    Question 75

    Aqueous 0.10 M solutions are made of four salts: anilinium chloride (C6H5NH3Cl\text{C}_6\text{H}_5\text{NH}_3\text{Cl}), ammonium chloride (NH4Cl\text{NH}_4\text{Cl}), methylammonium chloride (CH3NH3Cl\text{CH}_3\text{NH}_3\text{Cl}) and tetramethylammonium chloride ((CH3)4NCl(\text{CH}_3)_4\text{NCl}).

    pKb\text{p}K_b values of the bases (NCERT): aniline 9.38, ammonia 4.75, methanamine 3.38. Take pKw=14.00\text{p}K_w = 14.00.

    Which is the correct order of increasing pH of the solutions?

    MCQMedium
    1 mark
  76. 76

    Question 76

    Read the passage and answer the questions that follow.

    NCERT Table 9.3 lists the pKb\text{p}K_b values of the methyl- and ethyl-substituted amines in water:

    AminepKb\text{p}K_bAminepKb\text{p}K_b
    CH3NH2\text{CH}_3\text{NH}_23.38C2H5NH2\text{C}_2\text{H}_5\text{NH}_23.29
    (CH3)2NH(\text{CH}_3)_2\text{NH}3.27(C2H5)2NH(\text{C}_2\text{H}_5)_2\text{NH}3.00
    (CH3)3N(\text{CH}_3)_3\text{N}4.22(C2H5)3N(\text{C}_2\text{H}_5)_3\text{N}3.25

    The value for ammonia is 4.75. If only the +I effect of alkyl groups mattered, basic strength would always increase from 1° to 2° to 3°. In water, the substituted ammonium ions are also stabilised by hydrogen bonding with water molecules, and the size of the alkyl groups affects how well this can happen.

    (i) Calculate KbK_b for (CH3)2NH(\text{CH}_3)_2\text{NH} and (CH3)3N(\text{CH}_3)_3\text{N}, and the ratio of the two. [1]

    (ii) Explain why (CH3)3N(\text{CH}_3)_3\text{N} is a weaker base in water than CH3NH2\text{CH}_3\text{NH}_2, even though it has three electron-releasing groups. [1]

    (iii) In the ethyl series the tertiary amine is a stronger base than the primary amine, the opposite of the methyl series. Explain this reversal. [1]

    (iv) Calculate the pH of a 0.10 M aqueous solution of (C2H5)2NH(\text{C}_2\text{H}_5)_2\text{NH}. Justify your method of solving for [OH−][\text{OH}^-]. [1]

    (v) 2,2,2-Trifluoroethanamine, CF3CH2NH2\text{CF}_3\text{CH}_2\text{NH}_2, has pKb=8.3\text{p}K_b = 8.3. Calculate how many times weaker a base it is than ethanamine and explain the difference. Predict, with reasons, whether aniline is a stronger or a weaker base than 2,2,2-trifluoroethanamine. [1]

    Hard
    5 marks
  77. 77

    Question 77

    The structure of the pH indicator methyl orange (as its sodium salt) is shown below.

    Class 12 Chemistry Amines

    (a) By mentally breaking the molecule at the –N=N– link, identify the primary aromatic amine that is diazotised and the compound it is coupled with. [1]

    (b) Write balanced equations for the diazotisation step and for the coupling step. [1]

    (c) Explain why the coupling takes place at the para position of N,N-dimethylaniline, and why the coupling medium must be only mildly acidic: if the solution is made strongly acidic, coupling almost stops. [1]

    Hard
    3 marks
  78. 78

    Question 78

    Assertion (A): Benzenediazonium fluoroborate can be isolated as a dry solid that is stable at room temperature, whereas benzenediazonium chloride decomposes easily in the dry state.

    Reason (R): In the benzenediazonium ion, the positive charge is delocalised into the benzene ring by resonance.

    MCQMedium
    1 mark
  79. 79

    Question 79

    A solution of aniline (pKb\text{p}K_b 9.38) and p-nitroaniline (pKb\text{p}K_b 13.0) in ether is shaken with an aqueous acid solution kept at pH 2.0. Take pKa+pKb=14.0\text{p}K_a + \text{p}K_b = 14.0 for each conjugate pair.

    (a) Calculate the ratio [BH+]/[B][\text{BH}^+]/[\text{B}] and the percentage of each base present as its protonated form in the aqueous layer. [1]

    (b) Explain which amine is extracted into the aqueous layer and which stays mainly in the ether layer, and account for the large difference in basic strength that makes this separation possible. [1]

    Medium
    2 marks
  80. 80

    Question 80

    Direct nitration of aniline with a mixture of concentrated HNO3\text{HNO}_3 and H2SO4\text{H}_2\text{SO}_4 gives tarry oxidation products and a mixture of o-, m- and p-nitroaniline, so a chemist protects the –NH2_2 group as acetanilide before carrying out any substitution on the ring.

    (a) The chemist needs 4-bromo-2-nitroaniline. Starting from acetanilide, she can brominate (one mole of Br2\text{Br}_2 in ethanoic acid) and nitrate in either order, then hydrolyse. Decide which order gives the target, identify the isomer formed by the other order, and explain in each step which group on the ring decides where the new substituent enters. [1]

    (b) In the nitrating mixture, almost all the aniline is present as the anilinium ion. Explain why substantial amounts of the ortho and para nitro products are still obtained. [1]

    Medium
    2 marks