(a) For the liquids the viscosity falls as the temperature rises: water drops from 1.0 to 0.3 mPa s between 20 °C and 100 °C, and machine oil from 113 to 34 mPa s between 16 °C and 38 °C (to about 30% of its value over only 22 °C). For air the viscosity rises slightly, from 0.017 to 0.019 mPa s between 0 °C and 40 °C.
(b) In a liquid, viscosity comes mainly from the attractive forces between closely packed molecules, which resist one layer sliding over the next. When the liquid is heated, its molecules move more vigorously and are pulled apart more easily, so the layers slide more freely and the viscosity falls. In a gas the molecules are far apart and hardly attract each other; viscosity comes from molecules moving across from one layer into a neighbouring layer and carrying their momentum with them. Heating makes them move faster, so more momentum is transferred between layers and the viscosity rises.
(c) On a cold morning the engine oil is far more viscous (more than three times as viscous at 16 °C as at 38 °C, and even more below that). The thick oil resists the motion of the pistons and the crankshaft, so the starter motor has to do more work, and the oil flows slowly to the moving parts. Until it warms up, metal surfaces are poorly lubricated and wear more. This is why thinner, low-viscosity oils are recommended for cold climates.