(a) A drop has a single liquid surface, so the excess pressure inside it is 2S/r:
ΔPmist=1.0×10−62×0.0727=1.45×105 Pa
ΔPrain=2.0×10−32×0.0727=72.7 Pa
The ratio is 2.0×10−3/1.0×10−6=2000, since ΔP∝1/r. The mist droplet has an excess pressure of about 1.45×105 Pa, about 1.4 atmospheres, while the raindrop's is only 72.7 Pa.
(b) The surface of a drop is concave on the inside (towards its centre of curvature). Surface tension makes the curved surface act like a stretched membrane pulling inwards, so for equilibrium the pressure on the concave side must be greater. The pressure is higher inside the drop.
(c) For the tiniest droplets, the surface is so sharply curved that surface tension squeezes the liquid inside with a pressure larger than the atmosphere itself. A droplet that small has a very large surface area for its volume, so a much larger fraction of its molecules are at the surface, with extra energy, than in a big drop. Such a droplet is therefore energetically unfavourable: it tends to lose molecules to the air and shrink, and growing a droplet from nothing has to pass through this stage. Larger drops, with gently curved surfaces and small excess pressure, are much more stable. This is why droplets in clouds usually start on dust or other particles that give a larger, flatter surface to begin with.