(a) Take the level of the mercury surface in the open arm. At that level the pressure in the open arm is atmospheric. In the other arm, the same level lies 18.0 cm below the mercury surface on the chamber side, so
Pa=P+ρg(0.180)⇒P=75.0−18.0=57.0 cm of Hg
P=ρgh=13.6×103×9.8×0.570=7.60×104 Pa
The absolute pressure in the chamber is 57.0 cm of mercury, 7.60×104 Pa.
(b)
P−Pa=−ρgh=−13.6×103×9.8×0.180=−2.40×104 Pa
The gauge pressure is −2.40×104 Pa. Gauge pressure is measured from atmospheric pressure, so a negative value means the pressure in the chamber is below atmospheric pressure (a partial vacuum). It does not mean the absolute pressure is negative: the chamber still holds air at 7.60×104 Pa.
(c) The chamber is now at 57.0−6.0=51.0 cm of mercury, so the difference in levels must grow to
75.0−51.0=24.0 cm
an increase of 6.0 cm. Mercury is incompressible and the bores are equal, so whatever volume of mercury leaves one arm enters the other: the level on one side rises by exactly as much as the level on the other side falls. If each moves by x, the difference changes by 2x:
2x=6.0 cm⇒x=3.0 cm
The mercury on the chamber side rises 3.0 cm and the mercury in the open arm falls 3.0 cm, making the difference 24.0 cm. A common mistake is to move only one level by the full 6.0 cm.
P=13.6×103×9.8×0.510=6.80×104 Pa,P−Pa=−13.6×103×9.8×0.240=−3.20×104 Pa
(d) Air flows into the chamber until its pressure equals atmospheric pressure. Both arms of the manometer then have the same pressure, Pa, acting on their mercury surfaces, and two points at the same level in a liquid at rest must be at the same pressure. So the mercury levels in the two arms become equal: the chamber-side level falls 12.0 cm and the open-arm level rises 12.0 cm, and the gauge pressure reads zero.