Option (A) is correct.
Explanation: Before the release, the upward pull of surface tension along the contact circle, 2πaScosθ, is balanced by the weight of the raised column, πa2hρg, which fixes h=ρga2Scosθ=7.4 cm.
When the box falls freely, the box, the tube, the beaker and the water all fall with the same acceleration g. Relative to the tube, the column behaves as if it had no weight (apparent weightlessness), so nothing balances the surface-tension pull. The pull keeps drawing water up the tube until it reaches the top end.
At the top end the edge of the water surface reaches the rim. The surface there becomes flatter, its curvature adjusting until there is no unbalanced pull, so the water does not spill over, just as water does not overflow from a capillary that is too short.
(B) is wrong: S and θ are indeed unchanged, but the height 7.4 cm comes from balancing the weight of the column, and during free fall there is no weight to balance relative to the tube.
(C) is wrong: the water is held up by the surface-tension pull, not by its weight; removing the weight leaves that pull unopposed, so the water goes up, not down.
(D) is wrong: the surface-tension pull acts only while there is a wetted wall ahead of the water; at the open end the surface simply adjusts its curvature, and nothing supplies the energy for a jet.