Option (B) is correct.
Explanation: The block moves at constant velocity, so the forces along the incline balance. The only force opposing the motion along the plane is the viscous force of the oil, which therefore equals the component of the weight down the slope:
F=mgsin30∘=2.0×9.8×0.5=9.8 N
The oil next to the plane is at rest and the oil next to the block moves at v, so the velocity gradient is v/d. From η=v/dF/A:
η=AvFd=0.050×0.509.8×1.0×10−4=0.0392 Pa s
With a thicker film the viscous force must still balance the same 9.8 N, so the block speeds up until the velocity gradient v/d is the same as before:
v′=ηAFd′=0.0392×0.0509.8×2.0×10−4=1.0 m s−1
Doubling the film thickness doubles the steady speed.
(A) is wrong: 0.25 m s−1 assumes the speed falls as the film gets thicker; for the same force it is the gradient v/d that stays fixed, so v grows with d.
(C) is wrong: 0.0784 Pa s uses the whole weight, 19.6 N; only the component along the incline is balanced by the viscous force (the normal component is carried by the pressure in the film).
(D) is wrong: 0.392 Pa s takes the film as 1.0 mm thick, and 0.50 m s−1 ignores the effect of the thicker film.