Option (C) is correct.
Explanation: The type of stress depends on how the forces act relative to the surface on which they act.
(1) The bucket pulls down on the rope and the support pulls up: two equal and opposite forces perpendicular to each cross-section, stretching the rope. This is tensile stress.
(2) The television pushes down on the leg and the floor pushes up: equal and opposite forces perpendicular to each cross-section, squashing the leg. This is compressive stress.
(3) The two blades push the paper in opposite directions along two lines very close together, so one part of the paper is forced to slide past the next. The forces are parallel to the section being cut: shearing stress.
(4) The two strips are pulled in opposite directions along their length, which is parallel to the glued faces. The glue layer is therefore acted on by forces parallel to its surfaces: shearing stress, even though the strips themselves are pulled "apart".
(A) is wrong: in the lap joint the pulling forces are parallel to the glued faces, so the glue is sheared, not stretched.
(B) is wrong: it swaps (1) and (2); a hanging rope is stretched, and a table leg carrying a load is squashed.
(D) is wrong: the table leg is compressed along its length; it is not sheared, and the glue in (4) is sheared, not under tension.