(a) As the beam sags it curves downward in the middle, so its lower face becomes slightly longer and is stretched (in tension), while its upper face becomes slightly shorter and is squeezed (in compression). The middle layer is neither stretched nor squeezed.
(b) Concrete is strong in compression (Table 8.1 quotes its strength only under compression, 40 MPa) but weak in tension: it cracks easily when pulled. The top of the beam is in compression, which the concrete can take by itself. The bottom is in tension, which is where the concrete would crack. Steel is strong in tension, so the bars are placed near the lower face, where the stretching is greatest and the concrete is weakest. Bars near the middle would hardly be stretched and would do little, and bars near the top would reinforce the part that needs it least.